IKEA VALLHORN Motion Sensor
Design and Quality IKEA of Sweden
Product Overview
The VALLHORN motion sensor works with smart lights and plugs from IKEA. It can be used with the DIRIGERA hub to control smart products via the IKEA Home smart app.
IKEA Home smart app
For Apple devices, download the app from the App Store. For Android devices, download the app from the Google Play store.
Note: If you have a TRÅDFRI gateway, use the IKEA Home smart 1 app. For the best experience, upgrade to the DIRIGERA hub.
Getting Started with DIRIGERA hub
Download the IKEA Home smart app and follow the on-screen instructions. With DIRIGERA, you can connect as many products as you want to one motion sensor.
Getting Started Without DIRIGERA hub
- Ensure the smart product you want to connect is installed and powered on.
- Hold the motion sensor close to the smart product (less than 5 cm away).
- Press and hold the pairing button [link symbol] for at least 10 seconds. A red LED will steadily shine under the lens of the motion sensor. The smart product will pulse with a white LED once connected.
Product Features
Pairing button: Used for pairing devices.
[Clock symbol]: Choose how many minutes the connected lights and plugs will be on.
[Light/Dark symbol]: Choose between light and dark mode. In light mode, detected motion turns on lights in any surrounding. In dark mode, detected motion turns on lights only in the dark surrounding.
Changing the Batteries
A red LED light will light up under the lens of the motion sensor to show that new batteries are needed. Open the battery lid and replace with two new AAA/HR03 batteries. IKEA recommends using LADDA rechargeable batteries. Please note they are sold separately.
Factory Reset
To reset and remove all connected products, quick-press the Pairing button 4 times (within 5 seconds). Follow steps 1-3 to reconnect your smart products.
Care Instructions
To clean the product, wipe it with a soft dry cloth. Do not use abrasive cleaning agents, chemical solvents, or other equipment that may damage the products.
Important Information
- Operating temperature: -5°C to 40 °C.
- Do not leave the sensor in direct sunlight or close to any heat source to prevent overheating.
- Different building materials and placement of the units can affect the wireless connectivity range.
WARNING!
Risk of explosion if battery is replaced by an incorrect type. Do not mix batteries of different capacities, types, or date stamps. Dispose of used batteries according to instructions.
Technical Data
- Model: VALLHORN motion sensor
- Type: E2134
- Input: 2.4V, 2 x LADDA batteries HR03/AAA 1.2V
- Range: 10 m in open air
- Sensor view angle: 60° - 120°
- Sensor range: About 10 m
- Operating frequency: 2405-2480 MHz
- Output power: 3 dBm
- IP-class: IP44
Manufacturer
IKEA of Sweden AB
Address: Box 702, SE-343 81 Älmhult, SWEDEN
Disposal Information
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.
