Zeppelin Baumaschinen
Instruction Manual for CATERPILLAR models including: CRM02, PQMCRM02, 621-8167, 621-8168, 621-8167 Radio Box, 621-8167, Radio Box, Box
Caterpillar, Inc. CRM02 PQMCRM02 PQMCRM02 crm02
File Info : application/pdf, 10 Pages, 778.13KB
DocumentDocumentRADIO BOX PN : 621-8167 / 621-8168 General [Volume] Select a band in the Radio [BAND] Select a band in the Radio [Power On/Off] Increase/Decrease the frequency. Power On/Off Set your vehicle's Key to the ACC or ON position Power On: Press " " Power Off: Press " " Source Selection Press [AM], [FM], [DAB], [AUX], [BT] or [USB] to change the source. Volume Adjustment (Setting range: 0 to 20, Default 10) Touch the Volume indicator. Right direction to increase the volume, and Left direction to decrease the volume. Radio Operation -AM/FM/DAB- [BAND] Select a band in the Radio [TUNE] Increase/Decrease the frequency. [Preset Button] Select a preset station in the radio source, preset the current station.(By holding it down by more than 2 seconds) Operation Flow 1. Press [AM] or [FM] to select a band. 2. Select station Frequency Adjustment Touch the indicator. (Right side: Higher, Left side: Lower) Preset Station Selection Press the preset channel button from 1 to 7 to tune in a preset station Station Preset The 7 stations with good reception will be manually saved in the memory under preset 1 to 7. Preset stations can be simply called up by pressing 1 to 7. Manual Preset Memory 1. Use tuning to find a station 2. Press and hold one of the preset button 1 through 7 on the screen by more than 2 seconds. USB/BluetoothR Music Operation [BAND] Select a band in the Radio [Audio File] Select Audio File in the USB memory or iPOD. [Play Time] Indicate the play time Push the white circle to pause the sound [Folder] Select the Folder Operation Flow 1. Press [BT] or [USB] to select a band. 2. Connect the USB memory or iPOD to USB port. 3. When connect the USB memory or iPOD, the radio stream the sound automatically. 4. Folder Selection Touch the [Folder Select] and select the folder name. File Selection Touch the file name Pause Touch the white circle on the play time BluetoothR - General [Pairing] Go to process of Pairing [Paired Devices] Select the device which already was registered. Operation Flow 1. Pairing Press the [Pairing] button to make this unit standby for pairing with waiting status. 2. Operate you Bluetooth device to input the PIN code for connection. (Default PIN code is "0000") Once pairing is successful, the registered Bluetooth device can automatically communication with this unit. Paired Devices Press "Paired Devices" button to delete the registered device. Note If registration is not successfully completed within 1 minute, "Time out" appears. If registration fails because of mismatched PIN code, "BT PIN Error" appears. Depending on the communication status, it may take 5 to 40 seconds for device connection. BluetoothR - Hands Free Phone- [Phone] Select a call or Bluetooth setting Phone Call Select the [Phone] and select the [Call]. And select the phone number. Phone Hanging Up Press " " during a call. Phone Answering/ Reject [Incoming Call Message] Indicate during a call incoming/ making a call [Phone Answering] [Hanging Up] Phone Answering Press " " button during a call incoming. The "Incoming Call" message blinks during a call incoming. Phone Reject/Hanging Up Press " " button when reject a call incoming or hang up a call. AUX Operation [BAND] Select a band in the Radio Operation Flow 1. Press [AUX] 2. Connect the Sound equipment via Stereo jack. 3. When connect the Sound equipment, the radio stream the sound automatically. Model : 621-8167 / 621-8168 Specifications General Power supply : 24 V DC (12V / 24V), test voltage 24V, negative ground Current consumption : Less than 3 A (during USB playback) Bluetooth® Frequency: 2400 ~ 2483.5 MHz RF Transmit Power(Basic Rate): -6 ~ +4dBm Bluetooth® Version: Version 4.2 Operating temperature : -40~85 Power Output : 15 W x 2 ch (DIST=10% x 2ch) Maximum power output : 30 W x 2 ch Compatible speaker impedance : 8 Dimensions (W x H x D) : 175 x 50 x 121.5 mm Weight : 540 g FM stereo radio Frequency range : North America Latin America 87.5~107.9 MHz (200 KHz/STEP) Japan 76.0108.0 MHz (100 KHz/STEP) Oceania 87.5~108.0 MHz (100 KHz/STEP) Europe Asia 87.5~108.0 MHz (50 KHz/STEP) Usable sensitivity : 6 dB/µV Stereo separation : 35 dB (1 kHz) S/N ratio : 56dB AM radio Frequency range : North America 5301710 kHz (10 KHz/STEP) Latin America 5301710 kHz (5 KHz/STEP) Japan Europe Asia Oceania 5221629 kHz (9 KHz/STEP) Dealer Name: ZEPPELIN BAUMASCHINEN GMBH Physical Address: Zeppelinstrasse 2 03099 Kolkwitz-Krieschow Deutschland Website: https://www.zeppelin.com/de-en/cat/ Usable sensitivity : 33 dB/µV USB USB standard compatibility: 1.1/2.0 Full speed File system: FAT12/16/32 Power off maximum supply current for apple ipad: 2 A Playable audio format: MP3/WMA capacity/partition: Less than 32 GB/Only supported for 1 partition. FCC Statement: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which canbe determin ed by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiveris connected. --Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and a human body. ISED Statement: This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, (2) this device must accept any interference, including interference that may cause undesired operation of the device. L'émetteur exempt de licence contenu dans le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and a human body. Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et un corps humain.