Usage Guide and Precautions
Operating Instructions
-
Connecting the Power Cord
Plug in the power cord.
-
Filling the Water Tank
Take out the raw water tank, fill it with tap water, and put it back into the machine. Close the water tank cover.
-
Setting Water Temperature
Wait until the water filtration indicator is off. Press the water temperature buttons to set your desired water temperature.
-
Selecting Water Volume
After selecting the water temperature, press the water volume buttons to set the desired water volume.
-
Unlocking for Water Extraction
Press the safety lock button to unlock. It automatically unlocks for ambient water.
-
Extracting Water
Press the water extraction button to extract water. Press it again to stop.
Precautions
- For first-time use, to ensure the best filtration performance, fill the raw water tank and perform one-key emptying when filtration is completed. Repeat this until two tanks of tap water are filtered.
- For first-time use, when air passes through the high-precision filter elements, micro bubbles are generated, causing the extracted water to appear white and cloudy. This is a normal phenomenon.
- If the product is not used for over two days, it is suggested to change the water in the raw water tank and then perform one-key emptying twice. If the dispenser will not be used for over one week, please empty the water in it and disconnect the dispenser from the power supply. Seal the filter cartridge and store it in the refrigerator (2-5°C; do not put it into the freezer). When you use it again, please follow the cleaning procedures for first-time use.
- For first-time use, to avoid dry-heating and protect the machine, please extract some ambient water before extracting hot water.
- It is recommended to descale the raw water tank every 3 months to avoid serious scaling in the raw water tank. Please refer to the user manual for the descaling procedures.
