User Manual for TELTONIKA models including: TSF010000000, TSF010 Flat Ethernet Switch, TSF010, Flat Ethernet Switch, Ethernet Switch, Switch
2 giorni fa — • QSG (Quick Start Guide). • Packaging box. STANDARD PACKAGE*. * Standard package contents may differ based on standard order codes. Page 5. TSW010 SPATIAL ...
1 day ago — • QSG (Quick Start Guide). • Packaging box. STANDARD PACKAGE*. * Standard package contents may differ based on standard order codes. Page 5. TSW010 SPATIAL ...
TSF010 Copyright © 2024, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice. HARDWARE FRONT VIEW DATASHEET // TSF010 Ethernet LEDs Power LED BACK VIEW Ethernet ports Integrated DIN rail bracket POWER SOCKET PINOUT Chassis VIN RJ45 LED MEANING Orange LED on: link established 10/100 Mbps Orange LED blinking: active connection GND Copyright © 2024, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice. 2 DATASHEET // TSF010 FEATURES ETHERNET Ethernet IEEE 802.3 series standards 5 x ETH ports, 10/100 Mbps, supports auto MDI/MDIX crossover 802.3i, 802.3u, 802.3ab, 802.3x, 802.3az PERFORMANCE SPECIFICATIONS Bandwidth (Non-blocking) 10 Gbps Packer buffer 128 KB MAC address table size 2K entries Jumbo frame support 9216 bytes POWER Connector Input voltage range Power consumption PHYSICAL INTERFACES Ethernet Status LEDs Power Grounding 3-pin industrial DC power socket 7 57 VDC, overvoltage protection: 60 Vmax, reverse polarity protection: 80 Vmax, surge protection: min 64.4V/max 71.2V breakdown voltage, 93.6V maximum reverse voltage @4.3A maximum reverse surge current Idle: 1 W / Max: 1.5 W 5 x RJ45 ports, 10/100 Mbps 1 x Power LED, 10 x ETH status LEDs 1 x 3-pin industrial DC power socket Grounding terminal on power connector PHYSICAL SPECIFICATION Casing material Dimensions (W x H x D) Weight Mounting options Anodized aluminum housing and panels 113 x 28 x 50 mm 142 g Integrated DIN rail bracket OPERATING ENVIRONMENT Operating temperature -40 °C to 75 °C Operating humidity 10% to 90% non-condensing Ingress Protection Rating IP30 REGULATORY & TYPE APPROVALS Regulatory CE, UKCA, EAC, UCRF, RCM, FCC, IC, CB EMC EMISSIONS & IMMUNITY EMI IMMUNITY EN 55032:2015+A11:2020; EN 55035:2017+A11:2020; EN IEC 61000-3-2:2019+A1:2021; EN 61000-3-3:2013+A1:2019+A2:2021; ESD EN 61000-4-2:2009 Radiated Immunity EN IEC 61000-4-3:2020 EFT EN 61000-4-4:2012 Surge Immunity (AC Mains Power Port) EN 61000-4-5:2014 + A1:2017 CS EN 61000-4-6:2014 DIP EN IEC 61000-4-11:2020 SAFETY Standards IEC 62368-1:2018 Copyright © 2024, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice. 3 STANDARD PACKAGE* · TSF010 · 3-pin power connector · QSG (Quick Start Guide) · Packaging box DATASHEET // TSF010 TSF010 * Standard package contents may differ based on standard order codes. QSG CLASSIFICATION CODES HS Code: 851762 HTS: 8517.62.00 For more information on all available packaging options please contact us directly. AVAILABLE VERSIONS HARDWARE VERSION TSF010 ****** SUPPORTED FREQUENCIES N/A STANDARD ORDER CODE / PACKAGE CONTAINS TSF010000000 / Standard package Copyright © 2024, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice. 4 TSW010 SPATIAL MEASUREMENTS MAIN MEASUREMENTS W x H x D dimensions for TSF010: Device housing*: 113 x 28 x 50 mm Box: 140 x 32 x 55 mm *Housing measurements are presented without screws; for measurements of other device elements look to the sections below. TOP VIEW The figure below depicts the measurements of TSF010 and its components as seen from the top: DATASHEET // TSF010 RIGHT VIEW The figure below depicts the measurements of TSF010 and its components as seen from the right side: Copyright © 2024, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice. 5 FRONT VIEW The figure below depicts the measurements of TSF010 and its components as seen from the front panel side: DATASHEET // TSF010 REAR VIEW The figure below depicts the measurements of TSF010 and its components as seen from the back panel side: Copyright © 2024, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice. 6 MOUNTING SPACE REQUIREMENTS The figure below depicts an approximation of the device's dimensions when cables are attached: DATASHEET // TSF010 Copyright © 2024, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice. 7Adobe PDF library 17.00 Adobe Illustrator 28.2 (Windows)