SEURA 21.5 SLW-21A Smart Vanity TV Mirror User Manual

User Manual for SEURA models including: 21.5 SLW-21A-SEURA, 32 SLW-32A-SEURA, 21.5 SLW-21A Smart Vanity TV Mirror, 21.5 SLW-21A, Smart Vanity TV Mirror, Vanity TV Mirror, TV Mirror

Access Manual

Manuals – Séura

Download User Manual (PDF)

Smart Vanity TV Mirrors – Séura

File Info : application/pdf, 16 Pages, 1.06MB

smart-vanity-tv-mirror-manual

USER MANUAL
Smart Vanity TV Mirror
MODEL NUMBER 21.5" SLW-21A-SEURA 32" SLW-32A-SEURA
WARRANTY REGISTRATION
REGISTER FOR EXTRA BENEFITS
Activate within 30 days of purchase: seura.com/activate
W W W.SEUR A .COM

Thank you for selecting a Séura TV Mirror.
This product has been inspected and packaged carefully before shipment. Please read this guide before beginning installation.
Please keep this manual for future reference. Information in this manual is subject to change without prior notice. FCC Information This equipment has been tested and found to comply with limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and radiates radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment causes unacceptable interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced Radio/TV technician for additional help.

WARNINGS
To reduce the risk of fire, electrical shock and other injuries, keep these safety precautions in mind when installing, using, and maintaining your TV Mirror. The socket-outlet should be installed near the equipment and be easily accessible. The TV should be connected to a grounded GFCI protected main socket outlet.
WARNING: If you manipulate against the recommended usage, serious injury or death to user may result.

To protect against electric shock, do not immerse the power cord, power plug, or product in water or other liquid.
Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.
Close adult supervision is necessary when any product is used by or near children.
Do not operate any product with a damaged cord or plug or operate it after the appliance malfunctions or has been damaged in any manner.
Do not use the product close to any heat sources such as radiators, heat registers, stoves, or other products that produce heat.
Do not let the power cord come in contact with hot surfaces.
If you notice any smoke or scorched smell near the product, unplug power cord and refer to qualified personnel for service and/or repair.

Do not use or place any combustible or flammable substances near the product.
To electrically disconnect the product, turn OFF the product, then remove the electrical power plug from the outlet.
Do not place heavy articles on or step on the product.
Do not place the product on an unstable cart, stand, tripod or table.
Do not use this product for other than intended use.
This Séura product is only intended for use indoors.
This product is not waterproof. Do not immerse this product in water and/or expose to dripping or splashing water.
For added safety during a lightning storm, or when this product is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna.

Specifications of this product are subject to unannounced changes; this manual may thus not reflect the current technical status.

Before Installation
WARNING: READ ALL INSTRUCTIONS AND REVIEW ALL DRAWING SHEETS BEFORE ATTEMPTING TO INSTALL OR SERVICE THIS PRODUCT.
When installing and during use of this product, basic safety precautions should always be followed to reduce the risk of fire, electric shock and/or injury to persons including the following: · Inspect the desired location for installation and be aware of all electrical wiring pathways, water pipes, gas lines, or other
potentially hazardous conditions that may exist to protect from accidental damage during creation of on-site conditions. · Ensure all required electrical specifications are adhered to and have been installed by the appropriate individuals and are code
approved. · Ensure all framing requirements, if needed, have been completed to building code and pose no structural issues. · It is REQUIRED that this product is plugged into an electrical outlet protected by a Ground Fault Circuit Interrupter (GFCI) to
protect against electric shock, fire, and/or injury. Failure to do so will void any warranty for this product. · Only qualified individuals should attempt to service the product. Removing covers can expose you to high voltage and other
dangerous conditions. · To protect against electric shock, do not immerse the power cord, power plug, or product in water or other liquid. · Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock. · Close adult supervision is necessary when any product is used by or near children. · Do not operate any product with a damaged cord or plug or operate it after the appliance malfunctions or has been damaged in
any manner. · Do not let the power cord come in contact with hot surfaces. · To electrically disconnect the product, turn OFF the product, then remove the electrical power plug from the outlet. · Do not use this product for other than intended use. · This Séura product is only intended for use indoors. · This Séura product is not waterproof. Do not immerse this product in water and/or expose to dripping or splashing water as this
could cause an electrical hazard. · Retain this manual in a safe place for future reference.
WARNINGS:
Do not handle or remove your TV Mirror from the packaging until it is ready to be installed. To avoid damage to the TV Mirror, only transport it in a vertical position. Transporting the product horizontally may permanently warp the mirror. It is highly recommended that at least three (3) persons assist in the installation of the TV Mirror.
3

Lighting and Performance
The environment in which the TV Mirror is installed will affect the product performance. The key factors to consider for proper installation are surroundings and ambient light. Use the following guidelines to maximize the performance of the Séura product:
Type of Lighting
Avoid direct natural sunlight and excessive fluorescent lighting. These conditions will diminish the TV brightness and hinder its performance.
Light Direction
Avoid directing light toward the mirror. Position lights such that they illuminate objects in the room, not the mirror itself. For example, lights on the wall next to the mirror are more favorable than lighting located on the ceiling in the center of the room.
Background Colors
Sidewalls and furnishings that are dark, uniform, and non-reflective will provide better performance of the display. Bright colors, patterns, and contrasting colors will minimize the quality of the display.

DO use ambient

or indirect

lighting that

illuminates the

room, not the TV

Mirror.

DO use shades

or window

treatments to

block outdoor

light that

would interfere

with picture

performance.

DO NOT

DO NOT position lighting directly on the TV Mirror. This will wash out the picture and hinder the product's performance.

DO NOT

DO NOT position the product opposite bright, untreated windows. Natural lighting will interfere with picture performance.

Care and Maintenance
Our mirror technology has been developed to completely protect the mirror surface and allow easy maintenance. Please follow the guidelines listed for proper mirror care and cleaning: · The glass surface can be cleaned with any conventional non-ammoniated glass cleaner. Using ammoniated cleaners can damage
the glass coating and invalidate the product warranty. Care should be taken to use only a soft lint-free cloth. Apply all cleaners directly to the cloth and not the mirror surface. Never saturate the mirror surface as residual cleaner may seep behind the mirror. · Stubborn spots can be removed with solvents such as mineral spirits, de-natured alcohol, and acetone. Immediately remove solvent and dirt residues per the prescribed methods above with a compatible glass cleaner or water.

Séura Lighted TV Mirrors use LEDs that are rated to retain 70% overall brightness and the end of life, including cases where an individual LED fails.

Lighted TV Mirror

Display Requirements
Operation and Storage Requirements
The ambient temperature for operating the device is between 41° to 104° Fahrenheit. Do not install the device in the proximity of heat sources, such as heating pipes, heaters, furnaces or other devices that radiate heat. Mount the device in such a way that it is protected against moisture. To prevent fire or electric shock, never allow liquids to enter the unit. The product must be stored in dry and wellventilated rooms, without extreme temperature fluctuations. Heat sources and aggressive active substances may not be stored in the proximity of the device. The required storage temperature is 32° F - 140° F at an air humidity of 5 - 85% RH non-condensing. The device must be stored in the complete packaging, as delivered. The product must not operate on average more than twelve (12) hours per day on a permanent or extended periodic basis. The product must have proper, correct and sufficient AC supply voltage.
Installation Environment
Avoid direct light or sun exposure, direct proximity to heat sources, and outdoor installation. The product is specifically designed for indoor use only. There is the danger of fire and of electric shock and damage to the device if it is operated outdoors. Do not place any heat sources such as radiators and heat registers, etc. near the monitor. To reduce eye strain, avoid installing the Séura TV Mirror against a bright background such as a window. Position the monitor at the height of your eye level. Position the monitor directly in front of you at a comfortable viewing distance.
Installation
Have this product installed by qualified personnel only. Use the mounting systems which are specified or recommended by Séura. Install the product in a way that it is fixed properly and take care that children are not exposed to danger. Please take extra care during installation, avoid impacts. Before cabling your monitor, check that the power is off. To avoid any possibility of electric shock, always connect your equipment to properly grounded outlets. Use of power cords or adapters other than those provided may cause fire or malfunction. Place this product as close to the power socket as possible. Leave enough space to insert and remove the power plug on demand. Even if you switch off the product with your remote control, power is not cut off unless the power cord is unplugged. The rated voltage is indicated on the product label. Use only power cords and plugs that are suitable for your local electrical outlets. Install the power cords in such a way that it does not obstruct anyone. Ensure furthermore that the cable is not clamped and that it cannot be pulled out accidentally from the power adapter. Do not install the power cords in the proximity of heating elements and never place heavy items on the cable or power adapter. Do not modify or arbitrarily repair the power cords.
6

CAUTION
Use of power cords or adapters other than those provided with this product may cause fire, electric shock or malfunction. The individual components can be destroyed, if the polarity is reversed or an incorrect connection is used. The connecting plugs must be attached in such a way that the connector is held firmly. Have trained technical personnel install the electrical facilities necessary for mounting. Connect the power cord to a grounded outlet. Never cut or damage the power cord. Please disconnect the device from the power supply in the following cases: 1. The device is out of use for a lengthy period. 2. The device malfunctions or displays other unusual features, necessitating maintenance work. 3. During a thunderstorm. Please plan the positioning of the power supply and the source cables before proceeding with the structural measures and positioning of the Séura TV Mirror.
NOTE
Make sure the power source circuits are properly grounded. Use the supplied power cord in order to connect it to the power source. If your installation requires a different power cord, be sure to use an officially approved power cord displaying the mark of the safety agency that defines the regulations for power cords in your country. Please consider that the AC outlet for the power cord is placed within reach of the Séura TV Mirror and should be easily accessible in case it needs to be powered off. Install the unit in a dry environment where the operating ambient temperature will not exceed 40°C / 104°F. Ensure that your installation complies with national and local safety rules. Any servicing, adjustment, maintenance or repair must be performed only by servicetrained personnel.
7

Setup
Before using the device please check the following contents of the box for completeness:

TV Mirror with 5-foot Power Cable

Séura Smart Remote Control

www.seura.com PH. 920.857.9069 FAX 920.857.9490

Reseller

Drawing ID Number

Date Created

Revised Date

1 MAY 2024 17 MAY 2024

Item and Description

VTY-21A-3000x4200-RE-V2-NR-SB Séura Vanity TV Mirror, 21.5" Smart TV, 30"(W) x 42" (H) mirror, recessed mount, vanishing vanity glass, safety backing

30" 1/2" LIFT-OFF CLEARANCE REQUIRED

138" TOTAL DEPTH

VANITY TV SPECIFICATIONS PLEASE SEE WEBSITE FOR CURRENT SPECIFICATIONS
26" INTERLOCKING BRACKETS

42"

Checklist

1. Check, Drawing ID, Model String, Description

2. Customer Spec - If required

3. UL962 - If required will be in lower left hand corner

4. Frame - Correct Name and Description

5. No Logo - TV Mirror with a Matching

6. No Brackets - Remove Lift-Off Note

7. Non-Vanishing TV - Add Circle for IR Hole

8. Holes-Dimension per Sales Order

9. Arches or Shapes - Dimension Properly

10. Scat - Fix Dimensions if needed

11. TV Aperture - Center Aperature 716" VENT GAP

Checklist

1. IF No Brackets Remove Vent Gap Note. Add Ventilation Note and Unit to be Fastened to the Wall By Othes.

2. Correct TV Note

MIRROR SURFACE

3. Safety Backing Note if Required 4. Defogger Note if Required

INTERLOCKING BRACKETS

5. Clock Note if Required

21.5" VIEWABLE
SCREEN

MIRROR OUTLINE 1012"

30" 27"CENTERED

SIDE DETAIL VIEW SCALE 1 : 2
158"

51116"

181116"

512" 51116"

143T41O"11T6A"L DEPTH

SIGNATURE: NOTE: PLEASE SIGN AND DATE THIS PAGE BEFORE RETURNING TO SEURA, SIGNIFYING YOU AGREE TO ALL SPECIFICATIONS SHOWN ON ALL DRAWING SHEETS. THE BUILD PROCESS WILL NOT BEGIN WITHOUT AN AUTHORIZED SIGNATURE. FOR DRAWINGS THAT REQUIRE REVISIONS, SEND THE REVISIONS TO SEURA NOTED ON THE ORIGINAL DRAWINGS. A REVISED DRAWING PACKAGE WILL BE RE-SENT FOR SIGNATURE.

DATE:

TOLERANCES

(UNLESS OTHERWISE NOTED)

FRACTIONAL: ANGULAR:

41.120/"8"

TWO PLACE DECIMAL: .03"

THREE PLACE DECIMAL: .015"

PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE SOLE PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION IN PART, OR AS A WHOLE, WITHOUT THE WRITTEN PERMISSION OF MANUFACTURER, IS PROHIBITED.
25" WALL OPENING

SHEET 1

4058"

FIBER-REINFORCED CATEGORY 2 SAFETY FILM APPLIED OVER NON-ETCHED EXPOSED AREAS ON BACK OF GLASS

Model Number VTY-21A-3000x4200-RE-V2-NR-SB

Drawing ID Number -

Date Created 1 MAY 2024

A/V POWER LOCATION

214"

17ReMvi4sAe"Yd

Date 2024

MOUNTING SURFACE

TOLERANCES

(UNLESS OTHERWISE NOTED)

FRACTIONAL: 1/8"

2AN2G"ULAR: 1.0

WTAHTWRLELOE OPPLLAPACCEEENDDIEENCCIIMGMAALL::

.03" .015"

APTIRSHRETPOEHRPIENORFDSIEOOUTRLCAEMTRPIAOYRTNAOIONPINNEDRPCCT1AOOYR3NNOT8TF,FAIO"DTIRNHEENEADTSMIIAANALWNTUHHFIOSALDCETO,UWCRUIETMRHE.ONAUTNTY TH4E"WRITTEN PERMISSION OF MANUFACTURER, IS PROHIBITED.

SHEET 2

INSTALLATION INSTRUCTIONS:

· Reference the dimensions on this sheet to properly locate the wall brackets on the mounting surface, locate within 0.05 of levelness or 1/32".

· Wall brackets must have mounting screws in both end slots.

· If it is not possible to mount to the wall framing members, use the supplied toggle bolts into minimum ½-inch thick drywall. Toggle bolt instructions are included in the fastener packet.
· Hold mirror assembly close to wall, connect A/V and power, and verify functionality.

DETAIL A SCALE 1 : 5

VERTICAL DIMENSIONS ARE TO CENTER OF MOUNTING SLOTS

· Hang mirror assembly. Ensure the brackets are interlocked and mirror is secure.

Model Number VTY-21A-3000x4200-RE-V2-NR-SB

Drawing ID Number -

Date Created 1 MAY 2024

Revised Date 17 MAY 2024

TOLERANCES (UNLESS OTHERWISE NOTED)
FRACTIONAL: 1/8" ANGULAR: 1.0
TWO PLACE DECIMAL: .03" THREE PLACE DECIMAL: .015"

SHEET 3

Checklist 1. Proper Installation Notes 2. Check all dimensions 3. If it has a Frame Make sure it matches dimension on page 1 4. Shapes or Arches - Have the correct shape outline for the mirror outline 5. Dimensions - If there is a shape or arch you may need to dimension the brackets from the bottom 6. Matching Mirror - If third or fourth wall bracket should match tv mirror 7. Power Location Note Centered in the Box

Drawing Package with Installation Instructions

Mounting Hardware

Included:

Open:

LAST

VANITY TV MIRROR QUICK START GUIDE

Inspect:

4 Install:

5 Connect:

6 Set-up:

Quick Start Guide

Connections

IP CONTROL

RJ45

POWER

AUDIO IN
Left Right

SWITCH

Optical Digital
Audio Out

Technical Specifications

AUDIO OUT

HDMI 2 HDMI 3 (ARC) HDMI 1 USB 1
Firmware

Layouts vary depending on size

USB 2
DC 5V 0.5A

CVBS IN

AUDIO SWITCH

HEADPHONE
3.5mm

21 INCH TV
Model: SLW-21A-SEURA

32 INCH TV
Model: SLW-32A-SEURA

CUSTOMIZATIONS

CUSTOM DESIGN OPTIONS

Mirror size, mirror shape, holes, TV screen placement, frame, lighting, matching mirrors

CUSTOM TECHNOLOGY OPTIONS

Digital clock, night light, defogger

CUSTOM FUNCTIONALITY OPTIONS

Fingerprint protection**, tamper-free security latch, safety mirror backing

MAXIMUM MIRROR SIZE VIEWABLE SCREEN SIZE DISPLAY TYPE DISPLAY RESOLUTION ASPECT RATIO CONTRAST RATIO REFRESH RATE VIEWING ANGLE

Up to 94" w x 70" h or 70" w x 94" h

18 3/4" x 10 1/2", 21 1/2" Diagonally

27 1/2" x 15 1/2", 31 1/2 Diagonally

LED Backlit Array TN/TFT LCD

1920 x 1080 4K Compatible 16:9
2000:1 60Hz 178° Horiz/Vert

3840 x 2160 16:9
2000:1 60Hz 178° Horiz/Vert

VIDEO

RESPONSE TIME

8ms

TUNER HDMI

ATSC/NTSC 2.0 HDMI 2.1 (x1 ARC), HDMI 2.0 (x2)

INTEGRATION

COMPOSITE (AV) RF COAXIAL ANTENNA USB
RS-232 IP IR OPTICAL DIGITAL OUT BLUETOOTH

1x AV Composite - CVBS 1
2x USB type A, version 2.0 @ 0.5A UHD Video Playback with down converting not supported
Not Supported Yes
Yes (Wireless only) Yes Yes

1x AV Composite - CVBS 1
2x USB type A, version 2.0 @ 0.5A
Not Supported Yes
Yes (Wireless only) Yes Yes

AUDIO

LINE OUT SPEAKER OUTPUT

2 (1 powered, 1 unpowered*) Internal Amplifier, 2x8W RMS

INTERNAL SPEAKERS

2x Built In Speakers

INSTALLATION

MOUNT OPTIONS

Integrated Surface Mount or Integrated Recessed Mount

SURFACE MOUNT OFF-WALL DISTANCE RECESSED MOUNT OFF-WALL DEPTH

1 1/2" 3/4"

RECESSED MOUNT VENT GAP

1/4"

SMART UI

Web OS

OTHER

CERTIFICATIONS AND COMPLIANCE WARRANTY

FCC and CEC; UL 962 and cUL certification available upon request.
TV Mirrors with respect to Séura's labor, glass, structure, and assembly for three (3) years; electrical and LED light strips for five (5) years; TV including remote and power supply for two (2) years; mirror technology with respect to
Séura's labor and parts including clocks, night lights, defoggers, and dimmers are covered for three (3) years.

REMOTE

Séura Smart Remote Control

POWER CONSUMPTION, DISPLAY
**Included on Lighted TV Mirrors, optional on TV Mirrors with no lighting * The unpowered audio variable line out will cut audio from the speaker output. Optional for Lighted TV Mirrors; unavailable on TV Mirrors with no lighting

54W

130W
9

Remotes
Remote Functions
Power Numerical Keypad
Volume Control Mute Home
Microphone Back
(Subject to Change) Netflix Movies Play

Standby Power Quick Access (Hold) More / AD/SAP (Hold) Mute Channel Navigation Settings Content Navigation Controls Channel Guide Prime Video (Subject to Change) Input Source Selection Pause

Installation

Refer to the included custom drawing package for specific dimensions and instructions for your custom product.
1. Verify that the wall is prepared appropriately. If the product is an in-wall, or "Recessed" configuration, verify the dimensions of the rough opening.
2. Install mounting brackets according to the dimensions and instructions shown on "Sheet 3" of the included drawing package. Ensure mounting brackets are securely fastened using wood framing members where possible.
NOTE: Take care when moving the product. Always transport the product with at least two people.
WARNING: Always transport the product in a vertical position. Moving the product in an unsupported horizontal position may result in product flex or damage.
3. Connect power supplies and audio/video components.
· Testing all electrical and electronic devices to verify proper integration and functionality before securely mounting it to the wall is strongly recommended.
4. Position TV Mirror close to wall surface and securely engage mounting brackets.
· Allow for a ¼" ventilation gap for proper air flow and heat transfer.
5. Check to ensure the TV Mirror is fully engaged and secure to the mounting brackets.
6. Reference the appropriate electronics manual for TV Mirror operating instructions.

www.seura.com PH. 920.857.9069 FAX 920.857.9490

Reseller

Drawing ID Number

Date Created

Revised Date

1 MAY 2024 17 MAY 2024

Item and Description

VTY-21A-3000x4200-RE-V2-NR-SB

Séura Vanity TV Mirror, 21.5" Smart TV, 30"(W) x 42" (H) mirror, recessed mount, vanishing vanity glass, safety backing

30" 1/2" LIFT-OFF CLEARANCE REQUIRED

138" TOTAL DEPTH

26" 42"

Checklist 1. Check, Drawing 2. Customer Spec 3. UL962 - If requ 4. Frame - Correc 5. No Logo - TV M 6. No Brackets - R 7. Non-Vanishing 8. Holes-Dimensio 9. Arches or Shap 10. Scat - Fix Dime 11. TV Aperture - C

21.5" VIEWABLE
SCREEN

1012"

51116"

181116"

512" 51116"

1116" TOTAL DEPTH

SIGNATURE:
NOTE: PLEASE SIGN AND DATE THIS PAGE BEFORE RETURNING TO SEURA, SIGNIFYING YOU AGREE TO ALL SPECIFICATIONS SHOWN ON ALL DRAWING SHEETS. THE BUILD PROCESS WILL NOT BEGIN WITHOUT AN AUTHORIZED SIGNATURE. FOR DRAWINGS THAT REQUIRE REVISIONS, SEND THE REVISIONS TO SEURA NOTED ON THE ORIGINAL DRAWINGS. A REVISED DRAWING PACKAGE WILL BE RE-SENT FOR SIGNATURE.

DATE:
TOLERANCES (UNLESS OTHERWISE NOTED)
FRACTIONAL: 1/8" ANGULAR: 1.0
TWO PLACE DECIMAL: .03" THREE PLACE DECIMAL: .015"

SHEET 1

VANITY TV SPECIFICATIONS PLEASE SEE WEBSITE FOR CURRENT SPECIFICATIONS
INTERLOCKING BRACKETS

716" VENT GAP
MIRROR SURFACE INTERLOCKING BRACKETS

Checklist 1. IF No Bracke 2. Correct TV N 3. Safety Backi 4. Defogger No 5. Clock Note i

SIDE DETAIL VIEW SCALE 1 : 2

FIBER-REINFORCED CATEGORY 2 SAFETY FILM APPLIED OVER NON-ETCHED EXPOSED AREAS ON BACK OF GLASS

Model Number VTY-21A-3000x4200-RE-V2-NR-SB

Drawing ID Number -

Date Created 1 MAY 2024

A/V POWER LOCATION

MOUNTING SURFACE

Revised Date 17 MAY 2024

TOLERANCES (UNLESS OTHERWISE NOTED)
FRACTIONAL: 1/8" ANGULAR: 1.0
TWO PLACE DECIMAL: .03" THREE PLACE DECIMAL: .015"

SHEET 2

MIRROR OUTLINE
1434"
42" 25" WALL
OPENING

30" 27"CENTERED

158" 4058"

Checklist 1. Proper Installa 2. Check all dime 3. If it has a Fram 4. Shapes or Arch 5. Dimensions - I 6. Matching Mirr 7. Power Locatio

214" 4"

22" WALL OPENING

A 4"

138"

INSTALLATION INSTRUCTIONS:

· Reference the dimensions on this sheet to properly locate the wall brackets on the mounting surface, locate within 0.05 of levelness or 1/32".

· Wall brackets must have mounting screws in both end slots.

DETAIL A SCALE 1 : 5

VERTICAL DIMENSIONS ARE TO CENTER OF MOUNTING SLOTS

· Hang mirror assembly. Ensure the brackets are interlocked and mirror is secure.

Model Number VTY-21A-3000x4200-RE-V2-NR-SB

Drawing ID Number -

Date Created 1 MAY 2024

Revised Date 17 MAY 2024

TOLERANCES (UNLESS OTHERWISE NOTED)
FRACTIONAL: 1/8" ANGULAR: 1.0
TWO PLACE DECIMAL: .03" THREE PLACE DECIMAL: .015"

SHEET 3

NOTE:
All Séura drawing packages indicate generalized nominal residential wood framing construction, and are not indicative of any particular building code. It is the installers responsibility that all electrical, audio/visual, and framing construction are code compliant to the municipality in which the product is being installed. Modifications made to Séura recommendations are at the sole discretion of the installer and release Séura of all liability.
11

Making Connections
Connecting Video
The TV Mirror features one Composite and three HDMI inputs. We recommend using the HDMI inputs for best video and sound quality.

Connecting Audio
Two passive loudspeakers can be connected to the speaker output socket with speaker cables. Observe the polarity (+ and -) of the connections to avoid phase errors (= incorrect stereo playback).
Switch the audio selector switch on the TV to External.
Warning: When changing the audio from internal to external speakers, power-off the unit completely.

Euroblock Connector
+L - -R +
R+ +L - -

Speaker Wire Input

Connecting a USB Media Source
Connect an external USB media source to the USB socket to display photos, play music or install a software update.
In order to have access to the USB port after installation we recommend installing a USB extension cable.

(1) Hero Banner Hero banner: Promotional content updated by LG.

(2) TV Functions Access to TV Guide, Home Dashboard and User Guide.

(3) Recent Input

Quick access to the last input selected by user.

(4) App List

Access a wide range of streaming services, music,

and entertainment apps.

(5) Home Dashboard Connect your TV via your mobile device and choose your preferred input source.
5

Home Menu
1 Sponsored Content
2

(6) Frequently Viewed Channels Access your frequently viewed channels for quick viewing of your favorites.
6
Images on screen may vary 13

Home Menu
(7) LG Channels Browse featured channels provided by LG.
7
(8) Web Browser Browse the web directly from your TV using the builtin Web Browser feature.
8
(9) Now Streaming Stay up to date with the latest streaming TV and movie releases.
9
Images on screen may vary 14

Troubleshooting

If the product is not working properly, please check the following troubleshooting tips before you contact customer service:

Symptoms Blank screen

Possible Solution
Check the status LED. The LED should illuminate blue for a few moments when the TV is powered on, then extinguish. Please check if an input source is available and that the port of the device has been connected correctly in the Service Settings/ Input Ports menu. Press "Menu" on your remote control: you should see the OSD menu. Check your settings for misconfigurations and adjust accordingly. Alternatively, perform a factory reset to restore the TV Mirror to its default settings. If the problem still exists contact customer service.

Color defects

Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged.

The image is unsatisfactory
Error message: "No Signal"
Low or no sound
Remote control doesn't work

Adjust the picture characteristics as described in the above-mentioned section "Video Settings". Image is not stable Check that the display resolution and frequency from your media source is compatible with the TV Mirror. (Note that 21" is 4K compatible, rather than being native 4K.)
Check that the connected media sources are switched on. Check that the signal cable connector is properly connected and that the connection pins are not bent or damaged. Press "Menu" on your remote control: you should see the OSD menu. Check your settings for misconfigurations and adjust accordingly. Alternatively, perform a factory reset to restore the TV Mirror to its default settings. If the problem still exists contact customer service.
Press "Volume Up" and/or "Volume Down" on your remote control and check the audio connection cable(s). Make sure that the Volume Limit setting in the Service Settings menu has been set to an audible value. Ensure that the speaker selector switch on the until is correctly switched to designate internal or external speakers.
Replace the batteries in the remote. Tip! If the problem persists, verify that the remote is sending IR signal by observing the IR output on the remote via a cell phone camera. IR signal will appear blue in the camera. If there is no IR signal or the problem persists, contact customer service.

Pixel errors

Pixel errors outside of Séura's specified and permitted area are covered under Séura's limited product warranty. Please inquire directly with Séura Technical Support regarding Séura's Pixel Policy.

NOTE: If the above troubleshooting tips do not help you to find a solution, please contact Séura.

Integration and Control

INTEGRATION AND CONTROL DOCUMENTATION
To access IR Commands documents, please visit https://seura.com/ pages/for-professionals-residential-downloads

LIMITED PRODUCT WARRANTY
For information regarding Séura's warranty policy, please visit our website: https://seura.com/pages/warranty. If the current Séura warranty policy is after your product purchase date, please contact Séura Customer Support to request warranty documentation from the date of your purchase.
For additional customer support, please contact Séura. Toll Free: 1-800-957-3872 (Monday - Friday 8:00 am 4:30 pm, Central Time) Website: https://seura.com/pages/support

1230 Ontario Road Green Bay, Wisconsin 54311

Publish date: June 27, 2024. Information is subject to change without notice.

1-800-957-3872 contacts@seura.com

www.seura.com 16

94-067001

References

Adobe PDF Library 17.0 Adobe InDesign 19.4 (Windows)