Contact Us â Official VEVOR Support
Installation Guide for VEVOR models including: SHSHDSG1117-1US, SHSHDSG1117 Floating TV Stand, Floating TV Stand, TV Stand, Stand
File Info : application/pdf, 16 Pages, 1,011.84KB
DocumentDocumentFLOATING TV STAND MODEL:SHSHDSG1117-1US Technical Support and E-Warranty Certificate www.vevor.com/support MODEL:SHSHDSG1117-1US FLOATING TV STAND This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product. 1 SAFETY INSTRUCTIONS Warning-To reduce the risk of injury, user must read instructions manual carefully. Assembly precautions 1. Assemble only according to these instructions. Improper assembly may create hazards. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly. 3. Keep the assembly area clean and well-lit. 4. Keep bystanders out of the area during assembly. 5. Do not assemble if tired or when under the influence of alcohol, drugs or medication. 6. The product capabilities apply to properly and completely assembled products only. 7. Assemble on a flat, level, hard and smooth surface capable of safely supporting the Floating TV Stand. 8. If possible, you can use power tools to make assembly easier. 9. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area. 10. It is recommended that the Floating TV stand be installed on a load-bearing wall. Use precautions 1. Do not exceed specified weight capacities. 2. Use only on a flat, level, hard, and smooth surface that can safely support a fully loaded Floating TV Stand. 3. Use as intended only. 4. Inspect before every use; do not use if parts are loose or damaged. 2 WARNING for Furniture Power Distribution Units : -For type Y attachment: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. -For indoor use only. -Under no circumstances could the cover be opened. If the cover is damaged, the furniture Power Distribution Units may no longer be used. -This appliance can be used by children aged 8 years and above, as well as individuals with reduced physical, sensory or mental capabilities, or those lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. -Children shall not play with the appliance. -Cleaning and user maintenance shall not be made by children without supervision. SAVE THIS MANUAL 3 PARTS LIST 4 5 6 ASSEMBLY STEP 7 8 9 10 11 12 13 PRODUCT PARAMETER Model Input Voltage Colour Safe Loading Weight Product Size(L×D×H) Socket Function Net Weight SHSHDSG1117-1US AC125V Black 150 lbs 1500*300*215mm 2AC+2USB 13.1kg * Products such as specifications, appearance, and design are subject to modification without prior notice. Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 E-CrossStu GmbH EC REP Mainzer Landstr.69, 60329 Frankfurt am Main. YH CONSULTING LIMITED. UK REP C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX 14 Technical Support and E-Warranty Certificate www.vevor.com/support