CE Regulatory Compliance | TP-LinkTP-Link Product Support - Wireless Networking Equipment Support
Installation Guide for tp-link models including: 10 100Mbps Desktop Switch, TL-SF1005D, TL-SF1008D, TL-SF1016D, TL-SF1024M
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference.
For simplicity, we will take TL-SF1005D for example throughout this Guide. Ethernet Ports (1-5) ... Off: No link. Package Contents: Switch, Power Adapter and Installation Guide. ... Fast Ethernet: 100Mbps (Half Duplex), 200Mbps (Full. Duplex).
File Info : application/pdf, 2 Pages, 220.71KB
DocumentDocument©2018 TP-Link 7106508151 REV15.0.1 Installation Guide 10/100Mbps Desktop Switch T L-S F 1 0 0 5 D/ T L-S F 1 0 0 8 D T L-S F 1 0 1 6 D/ T L-S F 1 0 2 4 M Package Contents: Switch, Power Adapter and Installation Guide. Connection For simplicity, we will take TL-SF1005D for example throughout this Guide. LED Explanation Power On: Power on Off: Power off Link/Act On: Link present but no activity Flashing: Transmitting/receiving data Off: No link Internet Ethernet Ports (1-5) Router WAN Port LAN Port Power Cord PC PC Frequently Asked Questions (FAQ) Q1. The Power LED is not lit. The Power LED should be lit when the power system is working normally. If the Power LED is not lit, please check as follows: A1: Make sure the power cord is connected to the switch with power source properly. A2: Make sure the voltage of the power supply meets the requirements of the input voltage of the switch. A3: Make sure the power source is ON. Q2. The Link/Act LED is not lit when a device is connected to the corresponding port. It is recommended that you check the following items: A1: Make sure that the cable connectors are firmly plugged into the switch and the device. A2: Make sure the connected device is turned on and working well. A3: The cable must be less than 100 meters long (328 feet). For technical support and other information, please visit http://www.tp-link.com/support, or simply scan the QR code. Explanation of the symbols on the product label DC voltage RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. BSMI Notice b bab b b bb b 1C $E )H $S7* 1$# ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯b 1## 1#%& ¯ ¯ ¯ ¯ Specifications General Specifications Standard IEEE 802.3, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x Protocol CSMA/CD Interface 5/8/16/24 10/100Mbps Auto-Negotiation RJ45 Ports Network Media (Cable) 10BASE-T: UTP category 3, 4, 5 cable (100m) EIA/TIA-568 100 STP (100m) 100BASE-TX: UTP category 5, 5e cable (100m) EIA/TIA-568 100 STP (100m) LED Indicators Power, Link/Act LEDs Data Transfer Rate Ethernet: 10Mbps (Half Duplex), 20Mbps (Full Duplex) Fast Ethernet: 100Mbps (Half Duplex), 200Mbps (Full Duplex) Transfer Method Store-and-Forward MAC Address Learning Automatically learning, automatically aging Frame Forward Rate 10Base-T: 14880pps/Port 100Base-Tx: 148800pps/Port Wall Mountable TL-SF1005D, TL-SF1008D: No TL-SF1016D, TL-SF1024M: Yes Distance Between Mounting Holes TL-SF1016D: 157.2mm TL-SF1024M: 178mm Environmental and Physical Specifications Operating Temperature 0°C to 40°C (32°F to 104°F) Storage Temperature -40°C to 70°C (-40°F to 158°F) Operating Humidity 10% to 90%RH non-condensing Storage Humidity 5% to 90%RH non-condensing Safety Information Use only power supplies which are provided by manufacturer and in the original packing of this product. CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) SAFETY NOTICES Cautions Do not use this product near water, for example, in a wet basement or near a swimming pool. Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU. The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.