Tronsmart Element Groove Wireless Speaker User Manual
Introduction
Thank you for choosing the Tronsmart Element Groove Wireless Speaker. This speaker is equipped with Bluetooth 5.0 for optimal connection and pairing with your Bluetooth-enabled device. Please read this user manual before use and keep it handy for future reference.
Features
- Silicon covered exterior with IPX7 water-resistance rating.
- Passive radiator for deep bass.
- True Wireless Stereo (TWS) for stereo surround sound.
- Output up to 10W.
- Up to 24 hours of playtime.
- Bluetooth 5.0.
- Equipped with USB Type-C port supporting DC 5V/1A input charging.
- Supports voice assistant for music streaming, phone calls, weather inquiries, and more. (Note: Voice Assistant is supported by Siri, Google, and other local Android voice assistants.)
Package Contents
- 1 x Element Groove wireless speaker
- 1 x Charging cable
- 1 x 3.5mm AUX cable
- 1 x 60cm lanyard
- 1 x Warranty card
Button Configurations
The speaker features several buttons for control: Power ON/OFF and TWS pairing (①), Play/Pause, Hands-free calls, Bluetooth disconnection, and Voice Assistant activation (②), Volume down/Previous track (③), and Volume up/Next track (④). It also includes a USB Type-C charging port (⑤), a Micro SD/TF card slot (⑥), an AUX-in port (⑦), a TWS indicator light (⑧), and a Bluetooth indicator light (⑨).
Functions
- Power ON: Hold to power ON.
- Power OFF: Hold for 3 seconds to power OFF.
- TWS Pairing: Power on two speakers. Double press the Power ON/OFF button on one speaker to enter TWS pairing mode. During TWS paired mode, double press again to disconnect.
- Switch Playing Mode: In Bluetooth mode, press to switch to Micro SD/TF card mode.
- Play/Pause: Press to play and pause music.
- Answer/Hang Up Call: During an incoming call, press to answer or hang up.
- Reject Call: Hold for 3 seconds to reject an incoming call.
- Redial: In Bluetooth mode, double press quickly to redial the last dialed number.
- Voice Assistant: After pairing, hold the button for 2 seconds to activate the voice assistant.
- Volume Down: Press to lower volume.
- Previous Track: Hold to choose the previous track.
- Volume Up: Press to increase volume.
- Next Track: Hold to choose the next track.
Specifications
Model | Element Groove |
---|---|
Bluetooth | 5.0 |
Transmission Range | 30m/100ft (open area) |
Waterproof | IPX7 |
Output | 10W |
Playtime | Up to 24 hours (medium volume) |
Power Supply | DC 5V/1A |
Battery Capacity | 3.7V/2500mAh |
Charging Time | About 2.5 hours |
Loudspeaker Size | 58mm |
Distortion | ≤1.0% |
Frequency | 115Hz-15KHz |
Dimension | 4.05 x 2.24 x 4.05in / 103 x 57 x 103mm |
Product Weight | 463±5g / 13.33±0.2 oz |
Bluetooth Pairing
Turn on the speaker; the blue LED light will flash. Activate Bluetooth on your device. Go to your device's Bluetooth settings, scan for new Bluetooth devices, and select 'Tronsmart Element Groove' to pair. Hold the Play/Pause button for 8 seconds to disconnect Bluetooth.
TWS Mode
What is TWS? TWS (True Wireless Stereo) allows two Groove Bluetooth speakers to be paired and play music synchronously, providing stereo surround sound.
How to pair two Groove speakers:
- Turn on two speakers and ensure they are disconnected from any Bluetooth device.
- Double press the Power ON/OFF button quickly on one speaker. You will hear a voice prompt, and the TWS indicator light will flash yellow, indicating TWS pairing mode. They will pair automatically. Upon successful connection, you'll hear a sound prompt from both speakers, the TWS indicators will remain yellow, and the main speaker's Bluetooth indicator will flash blue quickly.
- On your device's Bluetooth settings, scan for 'Tronsmart Element Groove' and click to pair. A steady blue Bluetooth indicator on the main speaker signifies a successful connection. When music starts playing, this indicator will flash blue slowly.
How to disconnect TWS: During TWS mode, double press the Power ON/OFF button on one speaker to disconnect TWS.
Note: Once paired, speakers will automatically reconnect the next time they are turned on.
AUX-IN Mode
Connect the speaker to your mobile phone, MP3 player, PC, or laptop using the 3.5mm audio jack cable. When the blue light flashes slowly, you can play music via the wired connection.
Micro SD/TF Card Mode
Press the Power ON/OFF button to switch from Bluetooth mode to Micro SD/TF card mode. The memory capacity of the Micro SD/TF card should not exceed 64GB.
LED Indicators
- Bluetooth: Blue light flashes slowly for pairing. Blue light stays ON for successful connection.
- Micro SD/TF & AUX-IN: Blue light flashes slowly.
- TWS: TWS indicator flashes yellow slowly for pairing. Yellow light stays ON for successful pairing. Light turns off when pairing is canceled.
- Charging: Red light is ON while charging. Red light turns OFF when charging is complete.
Sleep Mode
The Groove speaker will enter Sleep Mode if it does not pair with any device via Bluetooth or if no music is played for 10-15 minutes after pairing, to save battery power. Press the Power ON/OFF button to turn it back on.
Notes & Tips
- Note: You can hold the Power ON/OFF button for 5-8 seconds to force-turn off the speaker if it malfunctions.
- Tips: Due to the speaker's powerful output, maintain an appropriate distance for listening. To avoid discomfort from excessive sound, listen at a suitable volume.
Caution
- RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.
- To prevent possible hearing damage, do not listen at high volume levels for long periods.
Care & Maintenance
Keep this manual handy for future reference. To clean the Tronsmart Element Groove Bluetooth Speaker, use a lightly dampened cloth with water. Do not use detergents or chemical cleaning agents, as they may damage the device. Do not disassemble the product; it contains no user-serviceable parts. Avoid dropping or jumping on the speaker. Store in a dry location, away from dust, dirt, and humidity. Do not dispose of the product in fire, as batteries may explode or leak.
Warranty Information
Your Tronsmart Element Groove Wireless Speaker is warranted to the original owner for 12 months from the date of purchase against defects in material and workmanship under normal use. If the product proves defective within 12 months, return the defective part or unit with freight prepaid and an explanation of the claim. Pack carefully to avoid transit damage. Tronsmart will repair or replace defective parts due to manufacturer's defect. This warranty covers personal use only and not commercial, rental, or unintended use. Tronsmart is not responsible for damages caused by misuse, improper maintenance, unauthorized modifications, or damage during return transit. Liability shall not exceed the purchase price of the product.
This warranty grants specific legal rights, and you may have other rights that vary by state.
THIS WARRANTY DOES NOT APPLY TO:
- Damage due to accident, misuse, abuse, alterations, or vandalism.
- Improper or inadequate maintenance.
- Unauthorized modifications or commercial use.
- Damage during return transit.
- Unsupervised use by children under 18 years of age.
(Tronsmart and its subsidiaries are not liable for damages caused by use other than intended or as instructed in this manual.)
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. If interference occurs, users are encouraged to try correcting it by reorienting the receiving antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer/technician. Changes not expressly approved by the responsible party may void the user's authority to operate the equipment.
FCC Radiation Exposure Statement: This device complies with FCC RF radiation exposure limits for an uncontrolled environment. It must not be co-located or operated with any other antenna or transmitter.