Shower Faucet System Dimensional Specifications
This document provides detailed dimensional specifications for a single-handle shower faucet system, based on technical drawings.
Main Assembly (Side View)
The main assembly illustrates the shower head, valve, and tub spout mounted on a wall. Key dimensions are:
- Shower Head Diameter: 5.91 inches
- Shower Arm Extension from Wall: 0.98 inches
- Wall Mount Bracket Height: 2.36 inches
- Vertical Distance (Shower Head Center to Valve Center): 8.76 inches
- Valve Body Depth from Wall Surface: 3.35 inches
- Tub Spout Length: 4.76 inches
- Handle Position: A single lever handle is mounted above the tub spout.
- Handle Height from Valve Center: 1.67 inches
Valve Body and Connections
The valve body features multiple connection ports. Key dimensions and details include:
- Connection Type: Indicated as "4-1/2NPT" (Note: NPT sizes are typically standard fractional inches, this may refer to rough-in or a specific fitting type).
- Valve Body Width: 5.04 inches
- Valve Body Height: 3.35 inches
- Valve Body Depth: 1.77 inches
- Visible Ports: Four ports are visible, suggesting connections for hot water, cold water, shower outlet, and tub outlet.
Trim Components
The visible trim pieces include a large circular escutcheon plate and a smaller one for the tub spout.
- Main Escutcheon Plate Diameter: 6.69 inches. This plate houses the single lever handle for operation.
- Tub Spout Escutcheon Diameter: 2.56 inches.
