masimostork.com/camera-user-manual
User Guide for Stork models including: LAB11993A Camera Complete Baby Monitoring System, LAB11993A, Camera Complete Baby Monitoring System, Complete Baby Monitoring System, Baby Monitoring System, Monitoring System, System
Attach USB Cable to Camera Plug the other end of the USB-C cable into the 12W power adapter. Plug the camera into a wall socket. Plug the USB-C cable into the
Stork Baby Monitoring Camera | Masimo Stork - Camera | App | Stork - US
File Info : application/pdf, 2 Pages, 307.35KB
DocumentDocumentMount the Camera on the Wall Center of Wall Mount 1 Place the camera mount on the wall with the center of the mount 4-5 feet above the crib mattress, near the center of the crib. Make sure the wall mount is level and the 4 hooks are facing up, then mark the locations of the screw holes. 2 Drill the 2 marked locations with a 1/4" (6mm) drill bit. 3 Tap the 2 wall anchors into the holes until they are flush with the wall. Quick Start Guide What's in the box? camera Camera Camera Mount Camera Power Cable 12W Camera Power Adapter 4 Secure the mounting plate onto the wall with the included screws. 5 Align the 4 holes on the camera base with the hooks on the mounting plate, slide the camera down to snap it in place. 6 Peel off the sticky pad liners on the back of the cable cover(s) to apply, starting at the camera. Add more covers as needed. © 2023 Masimo. All rights reserved. 304489/11993A-0523 Camera Cable Covers Right Elbow x 1 Left Elbow x 1 Straight x 18 2 Wall Anchors and 2 Screws Not intended for use as a medical device or to replace a medical device. Do not use it to diagnose, cure, treat, alleviate, or prevent any disease or health condition. Set up the camera The Stork Camera can be set on a flat surface or mounted to the wall (preferred). If set on a flat surface, place the camera in a safe location so as not to fall on anyone, and where alert sounds can be heard clearly. For wall mounting, pick a spot on the wall near the crib that is 4 to 5 feet above the mattress. Ideally, it should be located somewhere near the middle of the crib. At this height, the camera can monitor the whole crib. The camera needs to be located within reach of a wall outlet using the included power cable. No matter the camera location, the camera can be rotated and tilted forward or backward if you need to adjust the view. Attach USB Cable to Camera Plug the USB-C cable into the bottom of the camera. Press the cable down to secure it in the built-in channel. Side View of Camera 4 to 5 Feet Center of Crib Top View of Camera Optional: Set Camera on Flat Surface 12W Plug the other end of the USB-C cable into the 12W power adapter. Plug the camera into a wall socket. Pair camera to the app Download the Stork app and follow instructions. OWNER'S MANUAL Refer to the online manual for other functions, information, and operation details. masimostork.com/camera-user-manual The app screens shown in this document might differ from the actual ones displayed in the app.