Instructions for FIBERBUILT models including: T-660-4X10 Performance Turf Series Tee Box, T-660-4X10, Performance Turf Series Tee Box, Turf Series Tee Box, Tee Box
Performance Turf Series Tee Box - Rectangle See Parts & Assembly information for rectangular Tee Boxes here:6'x4' Tee Box8'x4' Tee Box
Performance Turf Series Tee Box - Rectangle
File Info : application/pdf, 4 Pages, 1.30MB
DocumentDocumentPerformance Turf series Tee Box - 10'x4' T-660-4X10 Parts & assembly Please check your box for accuracy. All of these pieces should be included. ITEM A B C D E F PART NUMBER TLCM-C-2 TLCM-E-2 TLCM-P-2 TLCM-P-4 TLCM-PINS50 660-TL-4X10 QTY. 4 6 10 4 1 Bag 1 Ball tray not included, sold separately A 2'x2' Corner (x4) B 2'x2' Edge (x6) C 2-Pin Connector (x10) D 4-Pin Connector (x4) E Pins (x1 Bag) HARDWARE RUBBER BASE GRASS PANELS FiberbuiltGolf.com F 10'x4' Performance Turf (x1) [Images not to scale] 833.328.3218 1 Ensure the ground is properly prepared for placement of the rubber base. The surface should be firm, packed and level. Concrete, asphalt, patios or decking are ideal. (Do not place on grass.) Place the rubber base pieces (A, B) on the ground together as shown. A B B B A A B B B A 3 Lay the Performance Turf (F) on top of the (F) base area to fit the frame. NOTE: We ship our turf folded in the box for the most expedient shipping. During transit, the turf pieces may curl slightly. If your turf is curled upon delivery, we recommend laying the turf pieces flat in the sun for a couple of hours to allow them to relax and flatten prior to laying them down on the base. Assembly Instructions 2 Secure rubber base pieces (A, B) together by pushing Connectors into adjacent holes in the sections. 2-Pin Connectors (C) for side connections 4-Pin Connectors (D) for center connections. Optional Step: For increased security and stability, install and secure Connectors with pins from underneath as you assemble the base pieces. (If the mat will be regularly moved or disassembled, we recommend skipping the use of the pins.) Steps for securing the pins: · As you set base pieces next to each other, lift up the corners of the rubber base pieces and place a plastic push pin (E) into the holes from underneath. · From the top, push the rubber 2-pin (C) or 4-pin (D) Connectors into position, guiding them onto the plastic push pins. · Gently tap with a hammer until the connectors are flush with the base surface. 4 Insert real tees anywhere on the Performance Turf to practice all kinds of tee shots. Finished Product Double the Life of Your Warranty Today for Free For a free one-year extension to our standard warranty, exclusive access to insider deals, new product information and much more, register your mat today at: FiberbuiltGolf.com/register Be sure to select the following: Performance Turf series Tee Box - 10'x4' SKU#: T-660-4X10 FiberbuiltGolf.com 833.328.3218