MEAN WELL Switching Power Supply ManufacturerProduct Liability Disclaimer-MEAN WELL Switching Power Supply ManufacturerGlobal Trade Item Number (GTIN)-MEAN WELL Switching Power Supply Manufacturer
Owner's Manual for MEAN WELL models including: EPS-65 Series 65W Single Output Switching Power Supply, EPS-65 Series, 65W Single Output Switching Power Supply, Output Switching Power Supply, Switching Power Supply, Power Supply
EPS-65-5 MEAN WELL - РКС Компоненти - РАДІОМАГ
File Info : application/pdf, 3 Pages, 161.14KB
DocumentDocument65W Single Output Switching Power Supply EPS-65 series GTIN CODE MW Search: https://www.meanwell.com/serviceGTIN.aspx Features : Universal AC input / Full range User's Manual Optional L-Bracket and cover High efficiency up to 90% Protections: Short circuit / Overload / Over voltage Cooling by free air convection 4×2" compact size LED indicator for power on No load power consumption<0.3W Operating altitude up to 4000 meters 3 years warranty TPTC004 UL62368-1 Bauart gepruft Sicherheit egelma ge od o s be wac g www.tuv.com ID 2000000000 BS EN/EN62368-1 GB4943.1 IEC62368-1 EPS-65-3.3 -C =Blank,-C ; Blank=PCB only, -C=Enclosed type SPECIFICATION MODEL EPS-65-3.3 EPS-65-5 EPS-65-7.5 EPS-65-12 EPS-65-15 EPS-65-24 EPS-65-36 EPS-65-48 OUTPUT DC VOLTAGE 3.3V RATED CURRENT 11A CURRENT RANGE 0 ~ 12A RATED POWER 36.3W PEAK LOAD(10sec.) Note.6 39.6W RIPPLE & NOISE (max.) Note.2 80mVp-p VOLTAGE ADJ. RANGE 3.1 ~ 3.6V VOLTAGE TOLERANCE Note.3 ±3.0% LINE REGULATION ±0.5% LOAD REGULATION ±2.0% 5V 11A 0 ~ 12A 55W 60W 80mVp-p 4.75 ~ 5.5V ±2.0% ±0.5% ±1.0% 7.5V 8A 0 ~ 8.8A 60W 66W 100mVp-p 7.13 ~ 8.25V ±2.0% ±0.5% ±1.0% 12V 5.42A 0 ~ 6A 65.04W 72W 120mVp-p 10.8 ~ 13.5V ±2.0% ±0.5% ±1.0% 15V 4.34A 0 ~ 4.8A 65.1W 72W 150mVp-p 13.5 ~ 16.5V ±2.0% ±0.5% ±1.0% 24V 2.71A 0 ~ 3A 65.04W 72W 240mVp-p 21.6 ~ 27V ±1.0% ±0.5% ±1.0% 36V 1.81A 0 ~ 2A 65.16W 72W 280mVp-p 32.4 ~ 39.6V ±1.0% ±0.5% ±1.0% 48V 1.36A 0 ~ 1.5A 65.28W 72W 300mVp-p 43.2 ~ 52.8V ±1.0% ±0.5% ±1.0% SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE 1000ms, 50ms/230VAC 2000ms, 50ms/115VAC at full load 50ms/230VAC 12ms/115VAC at full load Note.5 90 ~ 264VAC 127 ~ 370VDC [DC input operation possible by connecting AC/N(+), AC/L(-)] 47 ~ 63Hz INPUT EFFICIENCY (Typ.) 80% 82% 84% 86% 87% 88% 89% 90% AC CURRENT (Typ.) 1.8A/115VAC 1 A/230VAC INRUSH CURRENT (Typ.) COLD START 60A/230VAC LEAKAGE CURRENT <2mA/240VAC OVER LOAD PROTECTION OVER VOLTAGE 115 ~ 180% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.7 ~ 4.45V 5.6 ~ 6.75V 8.63 ~ 10.1V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V Protection type : Shut down o/p voltage, re-power on to recover 39.7 ~ 46.8V 53.3 ~ 64.8V WORKING TEMP. -30 ~ +70 (Refer to output load derating curve) WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH TEMP. COEFFICIENT ±0.03%/(0 ~ 50) OPERATING ALTITUDE Note.7 4000 meters VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS SAFETY & EMC (Note 4) WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF OTHERS DIMENSION PACKING UL62368-1, TUV BS EN/EN62368-1, CCC GB4943.1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, GB9254.1 Class B,GB17625 Class A,EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, heavy industry level, EAC TP TC 020 3077.6K hrs min. Telcordia SR-332 (Bellcore) ; 563.0K hrs min. MIL-HDBK-217F (25) PCB:101.6*50.8*29mm (L*W*H) ; with optional CASE:103.4*62*37mm (L*W*H) PCB: 0.15Kg; 96pcs/ 15.4 Kg/1.39CUFT ; with optional CASE: 0.3Kg; 45pcs/ 14.5Kg/0.63CUFT NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power. 6. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) 7. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). Product Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx Downloaded from Arrow.com. File Name:EPS-65-SPEC 2023-09-08 65W Single Output Switching Power Supply Mechanical Specification 3.175 FS1 3 2 1 CN1 M1 101.6 95.25 HS1 3.175 HS2 SVR1 1 2 3 4 CN2 LED M2 4-3.2 EPS-65 series Unit:mm Optional cover: No.998A -T 50.8 44.45 3 max. 29 18 14.5 37 1.HS1,HS2 cannot be shorted. 2.HS1 must have safety isolation distance with system case. AC Input Connector (CN1) : JST B3P-VH or equivalent Pin No. Assignment Mating Housing Terminal 1 AC/N 2 No Pin JST VHR or equivalent JST SVH-21T-P1.1 or equivalent 3 AC/L DC Output Connector (CN2) : JST B4P-VH or equivalent Pin No. Assignment Mating Housing Terminal 1,2 +V 3,4 -V JST VHR JST SVH-21T-P1.1 or equivalent or equivalent : Grounding Required ;M1 and M2 are Safety ground and should all be grounded Block Diagram EMI FILTER I/P & RECTIFIER FG O.L.P. POWER SWITCHING CONTROL Mylar film Optional L-Bracket: No.998A -D 4.2 12.7 2-M3 95 L=3 78 103.4 55 2-M3 L=3 24.2 2-M3 L=4 2- 3.5 30.85 62 RECTIFIERS +V & FILTER -V DETECTION CIRCUIT O.V.P. Downloaded from Arrow.com. File Name:EPS-65-SPEC 2023-09-08 65W Single Output Switching Power Supply EPS-65 series Output Derating Static Characteristics LOAD (%) LOAD (%) 100 12~48V For PCB only 80 60 3.3~7.5V for Enclosed type 40 3.3~7.5V for PCB only 12~48V for Enclosed type 20 -30 0 10 20 30 40 50 60 70 (HORIZONTAL) AMBIENT TEMPERATURE () 100 90 80 70 60 50 40 90 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (V) 60Hz Downloaded from Arrow.com. File Name:EPS-65-SPEC 2023-09-08