File:Bw nb.png - Teltonika Telematics Wiki
TM2500 - Teltonika Telematics Wiki
Teltonika TelematicsAdvanced Trackers - Teltonika Telematics WikiTeltonika Telematics Wiki
Owner's Manual for TELTONIKA models including: FMB130 Advanced 2G Tracker, FMB130, Advanced 2G Tracker, 2G Tracker, Tracker
File Info : application/pdf, 5 Pages, 68.94KB
DocumentDocumenthttps://wiki.teltonika-gps.com/view/FMB130_General_description FMB130 General description Main Page > Advanced Trackers > FMB130 > FMB130 Manual > FMB130 General description FMB130 is a tracking terminal with GNSS and GSM connectivity, which is able to collect device coordinates and transfer them via GSM network to a server. This device is perfectly suitable for applications, which require the location acquirement of remote objects. Contents 1 Package contents 2 Basic characteristics 3 Technical features 4 Technical information about internal battery 5 Electrical characteristics 6 Absolute maximum ratings Package contents The FMB130 device is supplied to the customer in a cardboard box containing all the equipment that is necessary for operation. The package contains: FMB130 device; Input and output power supply cable with 2x6 connection pins; Micro USB cable; 3.7 V 170 mAh rechargeable Li-ion battery. Basic characteristics GSM / GPRS / GNSS features: Teltonika TM2500 quad band module (GSM 850 / 900 / 1800 / 1900 MHz); GPRS Multi-Slot class 12 (Up to 85,6 kbps); SMS (text, data); Integrated GNSS receiver; Up to -165 dBm GNSS receiver sensitivity. Hardware features: Built-in movement sensor; Built-in Bluetooth 4.0 LE; Internal High Gain GNSS antenna; Internal High Gain GSM antenna; Internal flash memory 128MB (422 400 Records); 170 mAh Li-ion rechargeable 3.7 V battery (0.63 Wh). Interface features: Power supply: +10...+30 V; 3 digital inputs; 1 negative inputs (DIN2); 2 impulse inputs (DIN1, DIN2); 2 analog input; 3 digital outputs (connecting external relays, LED, buzzers etc); 1-Wire temperature sensor; 1-Wire iButton; LVCAN RX (INPUT 5); LVCAN TX (INPUT 6); 2 LEDs indicating device status. Special features: Fast position fix (Outdoor areas); High Quality track even in high density urban canyon; Ultra small case; Ready for harsh environment; Easy to mount in limited access areas; Firmly fasten; 2 LED status indication; Real time tracking; Smart data acquisition based on: Time; Speed; Angle; Distance; Ignition or any other I/O event; Sending acquired data via GPRS; GPRS and SMS I/O events; Virtual odometer; Jamming detection; Configurable using Secured SMS Commands; 1x micro SIM card; 1x eSIM; Overvoltage protection; Description Voltage Duration Normal operation +10 ... +30 V Unlimited Protection turns on, device turns off 34 V Unlimited Maximum voltage < 70 V Unlimited Maximum voltage impulse 90 V 5 ms Technical features Part name Navigation indication Modem indication Socket USB GNSS GSM Physical specification LED LED Soldered inner socket Micro USB socket Internal GNSS antenna Internal GSM antenna Technical details 2 W max. Current consumption at 12 V (Power supply 6...30 V DC) GPRS: average 63.3 mA rms Nominal: average 32.1 mA rms GNSS sleep: average 17.2 mA Deep Sleep: average 4.04 mA Online Deep Sleep: average 4.89 mA Ultra Deep Sleep: average 2.69 mA Battery charge current Average 140 mA Operating temperature (without battery) -40..+85 °C Storage temperature (without battery) -40..+85 °C Storage relative humidity 5..95% (no condensation) Device + case + battery weight 55 g Dimension drawing: Technical information about internal battery Internal backup battery Battery voltage (V) Nominal Capacity (mAh) Power (Wh) Charge temperature (°C) Discharge temperature (°C) Storage temperature (°C) Li-ion rechargeable battery 3.753.90 170 0.64 0.66 0 to +45 -20 to +60 -20 to +45 for 1 month -20 to +35 for 6 months Batteries are covered by 6 month warranty support. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Battery should not be disposed of into general household waste. Bring damaged or worn-out batteries to your local recycling center or dispose them into a battery recycle bin commonly found in supermarkets. Electrical characteristics Characteristic description Value Min. Typ. Max. Unit Supply Voltage: Supply Voltage (Recommended Operating Conditions) +10 +30 V Digital Output (Open Drain grade): Drain current (Digital Output OFF) 120 µA Drain current (Digital Output ON, Recommended Operating 0.1 Conditions) 0.5 A Static Drain-Source resistance (Digital Output ON) 400 600 m Digital Input: Input resistance (DIN1) 47 k Input resistance (DIN2) 38.45 k Input resistance (DIN3) 47 k Input voltage (Recommended Operating Conditions) 0 Suppl y voltag V e Input Voltage threshold (DIN1) 7.5 V Input Voltage threshold (DIN2) 2.5 V Input Voltage threshold (DIN3) 2.5 V Analog Input: Input voltage (Recommended Operating Conditions), 0 Range 1 +10 V Input resistance, Range 1 38.45 k Measurement error on 12V, Range 1 3 % Additional error on 12 V, Range 1 360 mV Measurement error on 30 V, Range 1 3 % Additional error on 30 V, Range 1 900 mV Input Voltage (Recommended Operating Conditions), 0 Range 2 +30 V Input resistance, Range 2 38.45 k Measurement error on 12V, Range 2 3 % Additional error on 12 V, Range 2 360 mV Measurement error on 30 V, Range 2 3 % Additional error on 30 V, Range 2 900 mV Output Supply Voltage 1-Wire: Supply voltage +4.5 +4.7 V Output inner resistance 7 Output current (Uout > 3.0 V) 30 mA Short circuit current (Uout = 0) 75 mA Ground sense: Input resistance 38.45 k Input voltage (Recommended operating conditions) 0 Supply voltage V Input voltage threshold 0.5 V Sink current 180 nA Analog Input error margin can increase if temperature varies. Absolute maximum ratings Characteristic description Supply Voltage (Absolute Maximum Ratings) Drain-Source clamp threshold voltage (Absolute Maximum Ratings), (Idrain = 2 mA) Digital Input Voltage (Absolute Maximum Ratings) Analog Input Voltage (Absolute Maximum Ratings) Value Min. Typ. Max. Unit -32 +32 V +36 V -32 +32 V -32 +32 V