Philips Hue Personal Wireless Lighting

Welcome to the World of Hue!

Setup Guide

Step 1: Power Your Lights

Power your light source(s) and turn on your wall light switches. [?]

Step 2: Connect the Hue Bridge

Plug in the Hue bridge and connect to your Wi-Fi router. [?]

Step 3: Download the Hue App

Download the Hue app and follow the instructions. [?]

For additional information about installing your new Hue bridge in an existing Hue setup, please visit www.meethue.com/connect-my-bridge.

Adapter Configuration

The Hue bridge comes with an adapter that can be configured for different regions. Follow the diagrams to attach the correct plug type (UK, US, EU) by inserting it until it clicks. [✔️]

Product Information

Learn more about Hue and how to use it at www.meethue.com.

Technical Specifications

FCC ID: O3M324131201801

IC: 10469A-BRIDGE

Wireless RF mode frequency band: 2400-2483.5 MHz

Wireless communications protocol: IEEE 802.15.4

Operating channels: 11-26

Environmental Specifications

Temperature (operation): 0-40 °C

Temperature (Storage): -25-60 °C

Relative humidity: 0-90% non condensing

Apple HomeKit Integration

Hue lights can be controlled away from home via the Hue system.

To control other HomeKit-enabled accessories remotely, you need an Apple TV (3rd generation or later) with Apple TV software 7.0 or later.

HomeKit requires an iPhone, iPad, or iPod touch with iOS 8.1 or later.

Communication between your Apple device and the HomeKit-enabled Hue bridge is secured by HomeKit technology.

The 'Works with Apple HomeKit' logo indicates that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad and meets Apple performance standards.

Operating Instructions & Safety

• Keep away from liquids and humidity.
• This product is for indoor use only. Do not use in wet locations, e.g., bathrooms or outdoors.
• This product is not a toy. Keep away from children.
• Do not place on hot surfaces.
• For safety reasons and under the terms of the warranty, do not open any enclosed devices.
• Only use the adapter supplied; using a different adapter can damage the device.

Limited Warranty

Philips warrants this device to be free from defects in material and workmanship for 2 years, based on up to 3 hours of average usage per day, 7 days per week, when used as directed.

For warranty claims, please call the toll-free number 1-800-555-0050 or visit www.philips.com.

This limited warranty does not cover devices subject to accident, neglect, abuse, misuse, or acts of God.

Replacement or refund is your sole remedy.

Cleaning and Maintenance

Do not clean the device when it is on and connected to the power supply.

To avoid scratching the device, clean only with a soft, dry cloth.

Do not use cleaning agents.

Regulatory and Legal Information

This device complies with Part 15 of the FCC Rules and RSS-247 of Industry Canada. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This digital apparatus does not exceed Class B limits for radio-noise emissions as set out in the Radio Interference Regulations of the Canadian Department of Communications.

CAN ICES-3 (B)/NMB-3(B)

This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Philips is not responsible for radio or TV interference caused by unauthorized modifications.

Apple, iPhone, iPad, iPad Air, and iPod touch are trademarks of Apple Inc., registered in the US and other countries. HomeKit is a trademark of Apple Inc.

"Hue Personal Wireless Lighting" is a trademark owned by Koninklijke Philips N.V.