Wireless Router 4G
Product Overview
The Wireless Router 4G enables the creation of a robust cellular connection within an industrial production environment. This product supports 4G cellular technology and is ideal for communication within autonomous guided vehicles and other industrial machines.
Hardware Overview
Device Layout and Ports
The device features multiple ports and connectors for connectivity and power. Key interfaces include:
- Gigabit PoE Ethernet (Ports 5-8): Four 10/100/1000M RJ45 ports supporting IEEE 802.3af/at PoE+.
- Gigabit Ethernet (Ports 1-4): Four 10/100/1000M RJ45 ports.
- Gigabit Ethernet WAN (Ports 9/10): Two 100/1000M RJ45 ports.
Connectors:
- Integrated Power Connector: A 4-pin terminal block (grey, with lock) for power input (2-pin) and relay (2-pin).
- SIM Socket: Two 4FF nano SIM card slots with a tray.
- SMA Socket - Cellular: Four SMA female sockets for LTE antennas.
System Indicators and Reset
The device includes several system LEDs and a reset button:
- Ring LED: 1x (Amber/Green)
- DO (Digital Output) LED: 1x (Red)
- Power LED: 1x (Green)
- Cellular (LTE) LEDs: 2x (Green)
- WLAN LED: 1x (Green, available on WLAN models only)
- System LED: 1x (Green)
- PoE LEDs: 4x (Green, available on PoE models only)
Reset Button: Allows for System Reset (2-6 seconds) or Default Settings Reset (over 7 seconds).
Dimensions and Physical Specifications
Dimensions: 200mm (Width) x 55mm (Height) x 126mm (Depth) (without mounting clip).
Ingress Protection: IP30.
Weight: Approximately 1500g without packaging.
Technical Specifications
Technology Standards
| Category | Details |
|---|---|
| Cellular Standard | 3GPP 4G LTE Release 15, 4G Multi-mode, 3GPP Rel.15, LTE Cat.20 |
| Ethernet Standards | IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3x Flow Control, IEEE 802.1AB LLDP, IEEE 802.1p Class of Service, IEEE 802.1Q VLAN, ITU-T G.8032 ERPSv2, IEEE 802.1D-2004 RSTP, IEEE 802.1Q-2005 MSTP, IEEE 802.3ad LACP, IEEE 802.1X Port Access, IEEE 1588 PTPv2, IEEE 802.3af/at PoE |
Interface Specifications
| Interface | Details |
|---|---|
| Ethernet Ports | LAN: 8x 10/100/1000Base-T RJ45 (Auto Negotiation, Auto MDI/MDI-X), with 4x IEEE 802.3af/at PoE/PoE+. WAN: 2x 100/1000Base-T RJ45 (Auto Negotiation, Auto MDI/MDI-X). |
| System LED Status | Ring: Off (Disabled), Green On (Normal), Green Blinking (RPL Owner), Amber On (Abnormal), Amber Blinking (Port Fail). DO (Red): Status indicator. Power (Green): On. Cellular (LTE) (Green): LTE connection On, disconnected Off. WLAN (Green): On (WLAN model only). System (Green): On. PoE (Green): On (PoE model only). |
| Ethernet Port LED | Link (Green On), Activity (Green Blinking), Speed 1000M (Amber On), Speed 100M (Off). |
| Reset Button | System Reset (2-6 Seconds), Default Settings Reset (over 7 Seconds). |
| SMA Connector | 4x SMA Female sockets for LTE Antennas. |
| SIM Socket | 2x 4FF Nano SIM. |
| Power Input, Digital Output | 4-Pin Removable terminal block connector. Power Input: 2 Pins. Relay Output: 2 Pins (DO: Dry relay output with 0.5A/24V DC). |
Cellular Properties
| Property | Details |
|---|---|
| Standard | 4G Multi-mode, 3GPP Rel.15, LTE Cat.20 |
| Frequency Bands | LTE FDD B1/B3/B7/B20, LTE TDD B38/B42/B43. Other bands available on request. |
Software Features
| Category | Details |
|---|---|
| Management | CGI WebGUI, CLI, IPv4, Telnet, SNMP v1/v2c/v3, RMON, LLDP, DHCP server/client/Option 82, TFTP, System Log, SMTP. |
| Traffic Management | Flow Control, Rate Control, Port Mirror, CoS, QoS, RFC 2474 DiffServ. |
| Filter | IGMP Snooping v1/v2/v3, IGMP Query, GMRP, IEEE802.1Q VLAN, QinQ, GVRP, Private VLAN. |
| Security | IEEE 802.1X/RADIUS, TLS v1.2, HTTPs/SSH, First login password management. |
| Advanced Security | TACACS+, Multi-user authentication, IEEE802.1x MAB, DHCP Snooping/IPSG, Dynamic ARP inspection, SFTP. |
| Redundancy | ERPSv2 (HW-based CFM), STP/RSTP/MSTP, Port Trunk/LACP. |
| Time Management | NTP, IEEE 1588 Precision Time Protocol v2. |
| WAN/Routing/NAT/Firewall/VPN | Throughput: 70 Mbps (WAN ports routing). Dual WAN Interface (Port 9-10). Routing: RIPv2, OSPFv2, VRRPv2, Static Multicast Route. NAT: 1-1 NAT, NAPT (SNAT/DNAT). Cellular: "Routing behind MS", "passthrough". Firewall: Stateful Inspection firewall, DMZ. VPN: IPSec, OpenVPN, GRE, L2TP. |
| MIB | ERPS MIB, MIB-II, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB. |
| Cellular Configuration | Radio on/off, 4G LTE Configuration, SIM Security, Connection Status, Cellular Time. |
Power Requirement
| Parameter | Details |
|---|---|
| Input Voltage | 24VDC (9.6-57 VDC for both PoE/Non-PoE models). |
| Reverse Polarity Protect | Yes. |
| Input Current | 5.54A@24VDC (with 120W PD loading). |
| Power Consumption | Max 12W@24VDC (full traffic without PD Loading). |
| PoE Management | Alternative A. Power Budget: System Max. 60W@70°C/12V, 120W@70°C/24V; Per Port Max. 30W. Standard: IEEE 802.3af/at. Management: PoE Enable/Disable, System/Port Power Budget Control, PoE Scheduling, PoE Status. |
Mechanical Specifications
| Specification | Details |
|---|---|
| Installation | Wall mount/Din rail mount. |
| Enclosure Material | Steel Metal with Aluminum. |
| Dimension | 200x 55 x 126 (W x H x D) / without Mounting Clip. |
| Ingress Protection | IP30. |
| Weight | ~1500g without package. |
Environmental Specifications
| Parameter | Details |
|---|---|
| Operating Temperature & Humidity | -40°C~70°C, 5%~95% Non-Condensing. |
| Storage Temperature | -40°C~85°C. |
| MTBF | >200,000 hours. |
CE Conformance
| Category | Standards |
|---|---|
| Safety | EN62368-1(LVD), EN62311. |
| Radio | EN301908-1/13. |
| EMC | EN301489-1/52, EN61000-6-2/4, EN55032/55035 Class A, EN55016-2-3 Class A. |
Ordering Information
| Item | Details |
|---|---|
| Model Name | NV1004 Wireless Router 4G |
| Package List | 1 x Product Unit 1 x 4-pin Removable Terminal Block Connector 1 x Wall mounting kit 4 x Antennas |
| Accessories | E-014 Power supply including EU, UK and USA plug. |
