DMEGC Solar
User Guide for DMEGC models including: DM Series N Type Bifacial Module With Double Glass, DM Series, N Type Bifacial Module With Double Glass, Bifacial Module With Double Glass, With Double Glass, Double Glass, Glass
DMEGC 440W N-Type All Black Bifacial Module with Double Glass - Go Solar Australia
File Info : application/pdf, 2 Pages, 2.16MB
DocumentDocumentResidential / Commercial N-Type Bifacial Module with Double Glass Type: DMxxxM10RT-B54HBT/HST Power Range: 435 - 450 W Max. Efficiency : 22.5 % Bifacial Module Application Up to 25 % higher electricity yields due to active cell technology in bifacial glass/glass modules on both sides. Better Performance Our modules perform better on sunny and hot days thanks to its optimized temperature coefficient. Excellent Low Light Performance Our modules can also provide higher power output under low light conditions, such as sunset, cloudy, or dawn. Excellent Quality More than 40 years' experience of manufacturing and intensive quality tests above the IEC standard ensures reliable modules and a secured investment. Assumption of Environmental, Social and Governance Responsibility (ESG) DMEGC stands for his responsibility. Production is certified according to SA 8000 (ILO standards). Certifications SA 8000 ILO Standards. Social responsibility standards ISO 9001 Quality management system ISO 14001 Environmental management system ISO 45001 Occupational health and safety management system ISO 50001 Energy management system Member DE 50188598 A member of Hengdian Group DMxxxM10RT-B54HBT/HST Module Specification Cell Type Dimensions (mm) Weight (kg) Front Cover Rear Cover Junction Box Cables Connector Type N -type Mono-crystalline , 108 (6x18) 1762 x 1134 x 30 24.5 2mm heat strengthened glass with anti -reflective coating 2mm heat strengthened glass 3 Diodes, IP68 according to IEC 62790 4mm²/Portrait: 350mm (+)/250mm(-) Landscape: 1100mm(+)/1100mm(-) Length can be customized Sunter: PV-ZH202B; Stäubli: PV-KST4-EVO2/xy_UR, PV-KBT4-EVO2/ xy_UR, PV-KST4-EVO2A/xy, PV-KBT4-EVO2A/xy Electrical Specifications¹ Back side(mm) Module Type Testing Condition DM435M10RT -B54HBT/HST STC² BNPI DM440M10RT -B54HBT/HST STC BNPI DM445M10RT -B54HBT/HST STC BNPI Maximum Power (Pmax/W) Maximum Power Current (Imp/A) Maximum Power Voltage (Vmp/V) 435 13.33 32.64 479 14.39 33.30 440 13.40 32.84 484 14.47 33.50 445 13.47 33.04 490 14.54 33.70 Short-circuit Current (Isc/A) 13.83 15.22 13.90 15.29 13.97 15.37 Open-circuit Voltage (Voc/V) 39.20 39.29 39.40 39.49 39.60 39.69 Module Efficiency STC (%) 21.8 22.0 22.3 ¹ Measurements according to IEC 60904-3, Measurement tolerance: Pmpp: ±3%, Isc: ±4%,Voc: ± 3%, Bifaciality: Pmpp: 80% ± 10%, Isc: 80% ± 10%, Voc: 100% ± 10% ² STC (Standard Test Condition): Radiation 1000 W/m², Module temperature 25, AM = 1.5 DM450M10RT -B54HBT/HST STC BNPI 450 13.54 33.24 14.04 39.80 22.5 495 14.62 33.90 15.45 39.89 BIFACIAL OUTPUT - REARSIDE POWER GAIN 10 % Pmax (STC) 479 484 20 % Pmax (STC) 522 528 30 % Pmax (STC) 566 572 490 495 534 540 579 585 Certification and Warranty Certification IEC 61215, IEC 61730 WEEE Registration No. Product Warranty Peak Power Warranty DE 50188598 25 years *25 years product warranty is only valid for this type of modules installed in residential rooftop PV systems in Australia. 30 years linear warranty Fire Rating Class IEC Class C 1.) First year: min. 99 %. 2.) From the 2nd year: Max. 0.4 % degradation annually. 3.) Min. 87.4 % in the 30th year. Operating conditions Operating Temperature ( ) -40 to +85 Maximum System Voltage(V) 1500 DC (IEC) Overcurrent protection rating (A) 30 Power Binning Tolerance (W) Protection class 0 / +5 II Max. Test Load, Push/Pull (Pa) Snow 5400 / Wind 2400 Max. Design Load, Push/Pull (Pa) 3600 / 1600 Country of Manufacture China I(A) Current-Voltage Curve (450W) 15 Temperature Characteristics Nominal Module Operating Temperature (NMOT) 42 ± 2 Temperature Coefficient of Pmax (%/ ) Temperature Coefficient of Voc (%/ ) Temperature Coefficient of Isc (%/ ) -0.29 -0.25 +0.048 Packaging Container Pallet Dimensions(mm) 40' HQ 1800 × 1140 × 1250 Pieces per Pallet 36 Pieces per Container 936 12.5 10 7.5 5 400W/m 2.5 200W/m 0 5 10 15 20 25 30 35 40 Voltage V U(V) Statement: The installation instructions and the warranty conditions must be followed. Due to technological progress, product parameters will be adjusted accordingly.When signing the contract, the latest data of the company shall prevail. Hengdian Group DMEGC Magnetics Co.,Ltd. Hengdian Industrial Zone, Dongyang City Zhejiang Province, China 322118 Tel: 0086-579-8658-8825 Fax: 0086-579-8655-4845 E-mail: solar@dmegc.com.cn, Website: www.dmegcsolar.com All information in this data sheet corresponds to EN 50380.Changes and errors excepted. Status: 12/2023, Document: EN_DS-M10RT-B54HBT/HST-202312_4 Copyright © 2023 Hengdian Group DMEGC Magnetics. All rights reserved.