Boult Audio Omega User Manual

Product Introduction

The Boult Audio Omega earbuds are presented with their charging case. Key components are:

• Multi-function Button: A control button located on each earbud.
• LED Indicator: Situated on the charging case, this light indicates the charging status of the case and earbuds.
• TYPE-C Charging Port: Located on the charging case for connecting the charging cable.

For an enhanced sound quality experience, it is recommended to use devices running iOS 8.0 or Android 4.3, or later operating systems.

Product Specification

Pairing Method

1. Remove the left and right earphones from the charging case to power them on. The earphones will automatically enter pairing mode and connect to each other within 10 seconds.
2. On your smartphone or device, navigate to Bluetooth settings and search for the pairing name "Boult Audio Airbass". Select it to complete the pairing process.

Charging Operation

1. Connect the provided Type-C charging cable to the charging port on the charging case.
2. Place the earphones into the charging case; they will begin charging automatically. During charging, the LED indicator on the case will flash green. Once charging is complete, all four green indicator lights will illuminate steadily.

Change Eartips

To ensure optimal noise reduction and comfort, you can change the eartips. The earbuds come with eartips in three sizes: Large (L), Medium (M), and Small (S).

Functions

1. Power on: Remove the earphones from the charging case, or long-press the multi-function button on either earbud for 2 seconds.
2. Power off: Place the earphones back into the charging case, or long-press the multi-function button on either earbud for 5 seconds.
3. Auto pairing: If the earphones have been previously paired with a device, they will automatically reconnect to that device when turned on.
4. Play/Pause: A single tap on the touch-sensitive area of either earbud will play or pause audio.
5. Next/Previous Track: Double-tap the touch area on the left earbud to play the previous music track. Double-tap the touch area on the right earbud to play the next music track.
6. Answer Call: A single tap on the touch area of either earbud will answer an incoming call.
7. Hang up Call: During an active call, double-tap the touch area on either earbud to end the call.
8. Call Rejection: To reject an incoming call, double-click the touch area on either earbud.
9. ANC Mode: Long-press the touch area on the right earbud for 3 seconds to toggle between Active Noise Cancellation (ANC) On, ANC Off, and Transparent mode.
10. Volume +/-: Triple-tap the touch area on the left earbud to decrease the volume. Triple-tap the touch area on the right earbud to increase the volume.
11. Music Modes: Tap four times on the touch area of the right earbud to cycle through three distinct music modes: Rock Mode, Bass Boost, and Hi-Fi Music.
12. Gaming Mode: Tap four times on the touch area of the left earbud to switch between Gaming mode (optimized for lower latency) and Music mode (optimized for better battery life).
13. Voice Assistant: When the earphones are connected to your device, long-press the touch area on the left earphone to activate your device's voice assistant (e.g., Google Assistant or Siri).

Precautions

1. Please charge the device in a safe environment. After the charging indicator on the case turns off, disconnect the USB charging cable promptly to prevent potential damage to the charging case from prolonged charging.
2. When listening to music, adjust the volume to an appropriate level. Prolonged exposure to high volumes can cause long-term damage to hearing.
3. Avoid using the earphones in environments with potential signal interference, as this may affect the earphone's Bluetooth connection.
4. Refrain from using the earphones in corrosive environments, as this could compromise their functionality.

Tip: When using the Bluetooth earphones for listening to music or making calls, please pay attention to adjusting the volume to a comfortable level to protect your hearing.