Somogyi FKIR 962 Hybrid Heater

Features

• Hybrid heater for heating indoor air.
• Combines comfortable and economical operation of infrared panels with the feeling of warmth provided by conventional heating methods.
• Remote control option.
• 960 W output.
• Electronic thermostat in the remote controller.
• Weekly program functionality.
• Wall or ceiling mounted design.
• Automatic shut-off in case of overheating.

Important Safety Instructions

WARNING: Parts of this appliance can become very hot and could cause burns. Extra care should be taken when children or handicapped persons are around.

1. Before using the product for the first time, read the instructions and retain for reference.
2. Keep children below age 3 away from the appliance unless under constant supervision. Children aged 3-8 may only switch the appliance on/off under supervision or instruction. Persons with impaired physical, sensory, or mental capabilities, or lacking experience/knowledge, and children from age 8 may use it under supervision or instruction. Children should not play with the unit. Cleaning/maintenance by children requires supervision.
3. Ensure the appliance has not been damaged during transport.
4. Do not use if dropped.
5. Do not use if there are visible signs of damage.
6. Never locate directly in corners; observe minimum mounting distances (Figure 2). Observe local safety regulations.
7. Use only for heating air, not for general heating purposes.
8. Do not direct hot air stream towards curtains or other flammable materials.
9. Do not locate near flammable materials (min. 100 cm).
10. Do not use where flammable vapors or explosive dust may be released, or in potentially explosive atmospheres.
11. PROHIBITED near bathtubs, basins, showers, swimming pools, or saunas.
12. For indoor use only, in a dry place. Protect from humid environments.
13. Do not locate directly under a wall outlet.
14. Consider wall material and bearing capacity when locating and mounting.
15. Ensure the appliance is fixed stably on the wall before powering on.
16. Operate only under constant supervision.
17. Do not operate unattended in the presence of children.
18. Prohibited in motor vehicles or confined spaces (< 5 m²) like elevators.
19. If not using for an extended period, switch off and remove the power plug.
20. Always power off before relocating.
21. If irregular operation (unusual noise, burnt odor) is detected, immediately switch it off and remove the plug.
22. Ensure no foreign objects or liquid enter through openings.
23. Protect from dust, humidity, sunlight, and direct heat radiation.
24. Power off by unplugging before cleaning.
25. Do not touch the unit or power cable with wet hands.
26. Connect only to a properly grounded 230 V AC/50 Hz electric wall outlet.
27. Unwind the power cable completely.
28. Do not lead the power cable on top of the appliance or near air openings.
29. Do not lead the power cable under carpets, door mats, etc.
30. Do not use extension cords or power distributors.
31. Locate for easy access to the power plug.
32. Route the power cable to prevent accidental pulling or tripping.
33. Battery replacement by adults only.
34. Insert batteries observing polarity.
35. Do not mix battery types or charge levels.
36. Fasten battery compartment lid after replacement.
37. Remove battery if not using for an extended period.
38. If battery liquid leaks, wear protective gloves and clean compartment with a dry cloth.
39. Immediately remove depleted battery.
40. Warning: Risk of explosion from incorrect battery replacement! Use only same or replacement type.
41. Do not expose batteries to heat/sunshine. Do not open, throw in fire, or short-circuit.
42. Non-rechargeable batteries must not be charged. Risk of explosion!
43. Do not insert accumulators instead of batteries (lower voltage/efficiency).
44. Do not weld or solder directly to the battery.
45. Store unused batteries in original packaging, away from metal objects. Do not mix unpacked batteries.
46. Intended for household use only.
47. Technical data and design may change due to continuous improvements.
48. Actual manual available from www.somogyi.hu.
49. No responsibility for printing errors.

Operation

Switch on using the main switch (1). The device beeps briefly, the red LED on the power supply lights up, and the device is ready for remote control connection.

Remote Control Connection

1. Insert 2x1.5V AAA batteries into the remote, minding polarity.
2. Press and hold the - and + buttons (2) on the remote control until CONNECT flashes on the display.
3. Successful connection: The flashing CONNECT will turn continuous, and the green LED on the unit's power supply will turn on.

Date and Time Setting

1. Press and hold the program selector button (3) on the unit until the text 24h appears flashing on the remote controller display.
2. Use the + and - thermostat setting buttons to toggle between 24h and 12h time display, then press the ON/OFF button (4) on the remote controller.
3. Use the + and - thermostat setting buttons to set the day, then press button (4).
4. Use the + and - thermostat setting buttons to set the hour, then press button (4).
5. Use the + and - thermostat setting buttons to set the minute, then press button (4).
6. Use the + and - thermostat setting buttons to turn the daylight saving time program (DST) ON or OFF, then press button (4).
7. Use the + and - thermostat setting buttons to select between °C and °F, then press button (4). Time is now set.

Operating the Device

Switch ON/OFF anytime using the remote's ON/OFF button (4). In OFF position, pressing the ON/OFF button (4) shows 'TARGET' and the set temperature. Use + and - buttons to set desired room temperature (0-70°C), then press ON/OFF button (4) again to turn on. Unit switches ON if ambient temp drops 3°C below set value. Unit switches OFF if ambient temp exceeds set value by 1°C. Error LL if temp drops below 0°C, HH if above 70°C.

Weekly Program Setting

1. Press program selector button (3).
2. Use button (3) to navigate to the desired day.
3. Use + and - buttons to set switch-on time (hours) (S.T), then press OK.
4. Use + and - buttons to set switch-off time (hours) (E.T), then press OK.
5. Use + and - buttons to set desired temperature (TARGET), then press OK.
6. Successful setting: MODE flashes on the remote display.

Window Opening Sensor

Active when remote shows 'OPEN' indicator. If device detects a sudden decrease in ambient temperature, it activates and the indicator flashes. Device switches off automatically. Press any button to restart. Device reverts to last set temperature.

Overheating Protection

Switches off the device if overheating occurs. Disconnect the mains plug. Let the device cool down (min. 30 minutes). Check for airflow obstructions. Turn on again. If protection keeps activating, disconnect and contact service.

Technical Specifications

Troubleshooting

Disposal

Collect waste equipment separately from household waste. Dispose of at point of sale, distributors, or specialized electronic waste collection facilities. Protect the environment and health.

Disposing of Batteries and Accumulators

Do not dispose of batteries/accumulators with household waste. Return used batteries/accumulators to collection points or shops for environmentally friendly disposal.

EU Declaration of Conformity

Somogyi Elektronic Kft. certifies that the FKIR 962 radio equipment complies with Directive 2014/53/EU. Full text available at: somogyi@somogyi.hu.

Visual Descriptions

Figure 1: Shows the Somogyi FKIR 962 hybrid heater unit and its remote control.

Figure 2: Displays the remote control interface with numbered elements indicating functions like timer mode, current temperature, target temperature, day selection (SUN-SAT), AM/PM, connect status, and ON/OFF buttons.

Figure 3: Diagram showing recommended minimum clearances around the heater for installation, with dimensions indicated in centimeters.