Mars Gaming MGD-ERGOPRO160 Electric Height-Adjustable Desk User Manual
Introduction
This manual provides comprehensive instructions for the Mars Gaming MGD-ERGOPRO160 electric height-adjustable desk. It covers setup, operation, safety guidelines, and specifications to ensure optimal use and longevity of your ergonomic workspace solution.
Safety Precautions
Please read all safety instructions carefully before assembly and operation. Failure to comply may result in personal injury or damage to the product.
- Ensure the desk is placed on a stable, level surface.
- Keep children and pets away from the desk during operation to prevent entrapment.
- Do not exceed the maximum weight capacity of the desktop.
- Disconnect the power supply before cleaning or performing maintenance.
- Avoid exposing the desk or its components to excessive moisture or extreme temperatures.
- Operate the desk only with the provided power adapter and control box.
Parts List
Verify all parts are present before beginning assembly. The following components are included:
- Desktop Surface (A): The main work surface.
- Left Leg Frame (B): One of the two vertical support legs.
- Right Leg Frame (C): The other vertical support leg.
- Crossbar (D): Connects the two leg frames for stability.
- Control Box (E): The central unit that powers the motors.
- Handset Controller (F): Interface for adjusting desk height and saving presets.
- Power Cable (G): Connects the control box to a power outlet.
- Fasteners (H): Includes screws and bolts for assembly.
- Cable Management Clips (I): For organizing wires.
Assembly Instructions
Follow these steps to assemble your Mars Gaming MGD-ERGOPRO160 desk:
- Attach Legs to Desktop: Place the Desktop Surface (A) upside down on a soft, protective surface. Attach the Left Leg Frame (B) and Right Leg Frame (C) to the underside of the desktop using the provided Fasteners (H). Ensure they are securely tightened.
- Install Crossbar: Connect the Crossbar (D) between the Left Leg Frame (B) and Right Leg Frame (C) using the appropriate Fasteners (H). This adds structural integrity.
- Mount Control Box: Attach the Control Box (E) to the underside of the Desktop Surface (A) using the provided Fasteners (H). Ensure it is accessible for wiring.
- Connect Motors: Plug the cables from the Left Leg Frame (B) and Right Leg Frame (C) into the corresponding ports on the Control Box (E).
- Connect Handset Controller: Plug the Handset Controller (F) cable into the designated port on the Control Box (E). Mount the controller to a convenient location on the desk edge using the provided screws or adhesive.
- Connect Power: Plug the Power Cable (G) into the Control Box (E) and then into a grounded electrical outlet.
- Cable Management: Use the Cable Management Clips (I) to neatly secure all cables under the desk.
- Final Check: Carefully turn the desk upright. Ensure all connections are secure and the desk operates smoothly.
Operation
The MGD-ERGOPRO160 desk is operated using the Handset Controller (F).
Height Adjustment
Press the "Up" arrow button (▶️) to raise the desk and the "Down" arrow button (▼) to lower it. The desk will move smoothly to your desired height.
Memory Presets
- To Save a Height: Adjust the desk to your desired height. Press the "M" (Memory) button, then press one of the numbered preset buttons (e.g., "1"). The current height is now saved to that preset.
- To Recall a Height: Press the desired numbered preset button (e.g., "1") to automatically move the desk to the saved height.
Display
The handset display shows the current height in centimeters (cm) or inches (in), depending on the unit setting. It may also indicate error codes if issues arise.
Reset Procedure
If the desk is not functioning correctly or displays an error, a reset may be necessary. Lower the desk to its lowest position. Press and hold the "Down" arrow button (▼) until the display shows "RST" or "0.0". Release the button. The desk is now reset.
Specifications
Technical details for the Mars Gaming MGD-ERGOPRO160:
| Feature | Specification |
|---|---|
| Model | MGD-ERGOPRO160 |
| Input Voltage | 100-240V AC |
| Output | DC 29V |
| Max Load Capacity | 100 kg (220 lbs) |
| Height Adjustment Range | 73 cm - 120 cm (approx. 28.7" - 47.2") |
| Speed | 25 mm/s |
| Noise Level | < 50 dB |
| Material | Steel Frame, MDF/Particle Board Desktop (varies by model variant) |
| Warranty | Refer to warranty card or Mars Gaming website |
Troubleshooting
Common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move | No power; Loose connection; Overload; Error code on display. | Check power cable and outlet; Ensure all cables are securely connected to the control box; Reduce load; Perform reset procedure. |
| Desk moves unevenly | Motor issue; Obstruction; Loose leg. | Perform reset procedure; Check for obstructions; Ensure legs are securely fastened. |
| Handset unresponsive | Connection issue; Control box fault. | Check handset cable connection; Perform reset procedure; Contact support if problem persists. |
| Error code displayed | Various system errors. | Refer to specific error code documentation or perform reset procedure. If issue persists, contact support. |
Warranty and Support
Mars Gaming provides a limited warranty for this product. For detailed warranty terms, service, or technical support, please visit the official Mars Gaming website or consult the warranty information provided with your purchase.
For more information, visit: www.marsgaming.eu
