Presentation, Collaboration & Visualizer Systems - WolfVision GmbHPresentation, Collaboration & Visualizer Systems - WolfVision GmbH
Installation Guide for WOLFVISION models including: Cynap Pure SDM Wireless BYOD Presentation System SDM Slot Module, Cynap Pure SDM, Wireless BYOD Presentation System SDM Slot Module, Presentation System SDM Slot Module, System SDM Slot Module, SDM Slot Module, Slot Module
WolfVision Cynap Support - WolfVision GmbH
File Info : application/pdf, 25 Pages, 826.51KB
DocumentDocumentWolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com 1 WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com vSolution Cynap Pure SDM Network Integration 1. Basics .......................................................................................................................... 3 2. Glossary ....................................................................................................................... 3 2.1. LAN / Ethernet settings ............................................................................................ 3 2.2. WLAN settings access point ................................................................................. 4 2.3. WLAN settings infrastructure (Cynap Pure SDM acts as client) ............................ 5 2.4. Date and time (General Settings)............................................................................. 6 2.5. Host name (General Settings).................................................................................. 6 2.6. LAN / WLAN port ..................................................................................................... 6 2.7. Proxy settings .......................................................................................................... 8 2.8. Security ................................................................................................................... 9 3. Network integration (examples) ...................................................................................10 3.1. Stand-alone access point mode (without wired network integration) .......................10 3.2. Cynap Pure SDM wireless network access point mode ..........................................11 3.3. Cynap Pure SDM network infrastructure mode .......................................................13 4. Firewall rules ...............................................................................................................15 5. Differences in Open Mode / Protected Mode ...............................................................19 6. BYOD..........................................................................................................................20 7. User interface..............................................................................................................21 8. Hardware and OS........................................................................................................22 9. Administration .............................................................................................................22 10. Bandwidth Measurement Data ....................................................................................23 10.1. PowerPoint Presentation ........................................................................................23 10.2. Multimedia from Notebook to Cynap Pure SDM using vCast Software ...................23 11. Client System Requirements .......................................................................................24 12. Index ...........................................................................................................................25 2 1. Basics WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com Before starting, check the existing infrastructure and define the required equipment and settings. Various examples in this document show the different ways in which Cynap Pure SDM can be integrated into the network. When connecting Cynap Pure SDM to LAN and WLAN at the same time, please use different IP ranges in order to prevent address conflicts. The listed IP addresses are only examples. Cynap Pure SDM can be treated as a standard network device and it is as secure as the supporting network. Cynap Pure SDM cannot be considered as a router, switch or firewall. Communication to other networks and access must to be controlled using your existing equipment (firewall, router, switch and so on). By default, the built-in access point is enabled, SSID and password are the serial number of the unit (inclusive leading zero, e.g. 0106406). 2. Glossary This glossary will assist you in setting up the network correctly. Please note that in order to connect Cynap Pure SDM to an existing company network, some information from the local administrator is required. 2.1. LAN / Ethernet settings Priority Interface Access DHCP IP address Subnet mask Gateway Name server 1 / 2 Identity Anonymous Identity Authentication Authentication Method Root Certificate The higher prioritized interface (value = 1) will be used for network services first. Ensure that the value is different from the WLAN interface priority. Cynap Pure SDM will get all network settings automatically from the DHCP server in the existing network. Switch it to OFF to set the static addresses manually. Unique address in the network, i.e. 192.168.0.100. The IP address of Cynap Pure SDM can for example be set to 192.168.0.1. Available IP addresses can be limited. A commonly used subnet mask would be 255.255.255.0 Defines the IP address of the server / connection to other networks (such as the internet). When Cynap Pure SDM is directly connected only to a PC, then enter the IP address of the PC. Input the IP address of the preferred Domain Name System (DNS). This Server translates domain names into corresponding IP addresses. Login credentials to connect Cynap Pure SDM in a protected network. (802.1x). The identity to be used on an unencrypted session before Identity is being validated on an encrypted session. Allows authentication according to IEEE 802.1X Enter valid login data to connect. Supported are PEAP with MSCHAPv2 and TTLS-PAP Only root certificates are supported, load the certificate by using the Web Interface through the WLAN interface. Allowed certificates: · root certificate (CA) with common file extension .crt 3 WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com Base-64-coded X.509 encoded DER certificate · Privacy Enhanced Mail with common file extension .perm Base-64-coded X.509 encoded DER certificate certificate stored between 2 tags: "---Begin Certificate---"and" ------End Certificate-----" 2.2. WLAN settings access point Mode OFF Mode Access Point Region Channel Enable Routing IP address Subnet mask Maximum Number of Clients Disable access point. Enable access point. Select the region where Cynap will be operated (US-region or others). Defines the channel used for wireless communication. For optimum performance, select a currently unused channel. In access point mode, Cynap Pure SDM offers non-overlapping channels only. Enable Routing allows HTTP/HTTPS traffic of your third-party device through the LAN interface of Cynap Pure. Gateway and first Nameserver of the LAN interface will be used. Warning: Enabling Internet Routing could be a security risk! Protect your data from unauthorized access. Defines the IP address of the access point. Cynap Pure SDM acts as a DHCP server and provides the necessary network settings to the connected devices. Available IP addresses can be limited. A commonly used subnet mask would be 255.255.255.0 For security reason, the number of supported clients can be reduced (max. supported 8). 4 WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com 2.3. WLAN settings infrastructure (Cynap Pure SDM acts as client) Use the access point list to check the currently available access point and its signal strength. Mode Infrastructure Band Priority Interface Access BSSID On / Off SSID Enable Infrastructure, Cynap Pure SDM can be connected as client to an existing access point. By default, Cynap Pure SDM uses the 2.4GHz and 5 GHz frequency band. The used frequency band can be limited to either 2.4GHz or 5 GHz. This setting is available in SSID mode only. The higher prioritized interface (value = 1) will be used for network services first. Ensure that the value is different from the LAN interface priority. Use the button to toggle between SSID and BSSID mode. With BSSID (Basic Service Set Identification), the used access point will be fixed and Cynap Pure SDM will connect to the defined access point only. Access point hopping, which is available in SSID mode (Service Set Identification), will be prevented. Defines the network name in plain text for easy identification of the WLAN network. Check existing WLAN infrastructure to get SSID. Following characters are supported: - AaBbCcDdEeFfGgHhIiJjKkLlMmNnOoPpQqRrSsTtUuV vWwXxYyZz - 0123456789 - _-:$& () BSSID Subnet mask Gateway IP Name server 1 / 2 Encryption Identity Anonymous Identity Authentication Method Root Certificate Defines the network name in plain text for easy identification of the WLAN network. Check existing WLAN infrastructure to get SSID. This setting is available in SSID mode only. Available IP addresses can be limited. A commonly used subnet mask would be 255.255.255.0 Defines the IP address of the server / connection to other networks (such as the internet). When Cynap Pure SDM is directly connected only to a PC, then enter the IP address of the PC. Input the IP address of the preferred Domain Name System (DNS). This Server translates domain names into corresponding IP addresses. Defines encryption for safe network traffic. All connected units must use the same algorithm (None, WEP, WPA2, WPA2 Enterprise). Login credentials to connect Cynap Pure SDM in a WPA Enterprise protected network. The identity to be used on an unencrypted session before Identity is being validated on an encrypted session. Supported are PEAP with MSCHAPv2 and TTLS-PAP Only root certificates are supported, load the certificate by using the Web Interface through the LAN interface. Allowed certificates: · root certificate (CA) with common file extension .crt Base-64-coded X.509 encoded DER certificate 5 Signal Level Limit (dBm) Signal Level Reconnect Counter (Connection Loss) Reconnect Counter (Low Signal Level) WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com · Privacy Enhanced Mail with common file extension .perm Base-64-coded X.509 encoded DER certificate certificate stored between 2 tags: "---Begin Certificate---"and" --- ---End Certificate-----" Defines when Cynap Pure SDM start to search for another access point with the same SSID in your infrastructure (WLAN roaming). Monitoring the current signal level to prevent too low values. Lookups could interrupt the network connection shortly and every lookup will be counted (Reconnect Counter (Low Signal Level). Shows the current strength of the WLAN signal in dBm. Counts every connection loss, e.g. when the selected access point would be powered down. Counts every lookup then the measured signal falls below the user defined signal level limit. 2.4. Date and time (General Settings) Time source Cynap Pure SDM has a built-in battery-buffered RTC clock (Real Time Clock). Settings will only be lost if the battery is empty. To eliminate the risk of incorrect time stamps, Cynap Pure SDM can be synchronized to an external time server. Select external and input a valid IP address or URL of a NTP time server. 2.5. Host name (General Settings) Host name The Host name can be changed in the settings under general settings. The host name can be useful for network administrators to see the device name in plain text in the list of clients. Please note, this host name is not automatically listed in the DNS list, and therefore cannot be used in a browser without DNS registration. 2.6. LAN / WLAN port The LAN port enables integration of Cynap Pure SDM into an internal network. Administrators of a large number of Cynap Pure SDM systems can use the LAN port to control, support and update all of their units from their local desktop PC. The list of applications for the Cynap Pure SDM LAN port is constantly increasing. It can be used for controlling, capturing still images, viewing live video streams, firmware updates, adjustments, menu settings and for maintenance purposes. Some features are only supported when using vSolution Link software. The following protocols are supported: TCP/IP, IGMP, RTP, RTSP, UDP and ARP. Supported (tested) internet browsers are: Microsoft Edge, Firefox, Chrome, and Safari. By default, DHCP is activated to receive all network settings automatically from the server. 6 WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com Hint - WLAN: To ensure optimal performance of supplied remote control (optional), prevent channel 13 in the band of 2.4 GHz. Switch Cynap Pure SDM to standby closes all connections. 7 2.7. Proxy settings WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com To increase security level, use a proxy server to control HTTP and HTTPS traffic from Cynap Pure SDM. Built-in access point and other local services are not controlled. To take effect the new settings, Cynap Pure SDM will reboot automatically. Proxy enable URL Host Port Authentication Username Password Enable / disable proxy service When enable, all HTTP and HTTPS traffic will be routed to your proxy server. URL of the proxy server in your network, like 104.236.10.17 (or DNS name up to 256 characters, no space between the characters). DNS server not required, when using IP addresses. Port, set the used network port to connect to your proxy server. Disable / enable Authentication When enabled, valid user name and password has to be entered. Username, given by your server. Password, given by your server. 8 2.8. Security WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com Admin password Defines the necessary password for administrator access. This login data is needed to change the Ethernet Mode, and an existing administrator password. Using the login data, an administrator can connect to Cynap Pure SDM at any time. The default password is "Password". Remember to make a note of any changed passwords! Login Security Accessing Cynap Pure SDM can be protected by authentication (admin, moderator or PIN). To prevent unauthorized access of the settings, the admin password needs to be entered once per session. Network Security Accessing Cynap Pure SDM can be limited to secure connections only (https). Please note, the accessing application needs to support SSL / TLS (e.g. the most modern browsers are supporting HTML5 and SSL /TLS). Wolfvision support access can be prohibited by disabling SSH. LAN Security When using wired network, use authentication (according 802.1x) to maximize security. When using certificates, load it busy using the Web Interface. WLAN (WiFi) Security When using wireless network, use encryption to maximize security. Cynap Pure SDM complies with following standards: · WEP · WPA2 · WPA2 Enterprise (according 802.1x) Hint WEP allows password with a length of 13 characters. WPA2 allows password with a length of 8 ~ 63 characters. Use special characters carefully, not every third party device can handle it. When using WPA2 Enterprise, load the certificate by using the Web Interface. 9 WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA 3. Network integration (examples) Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com The following examples are showing different ways to integrate Cynap Pure SDM into your network infrastructure, one network and one wireless network. BYOD (bring your own device) allows sharing the screen content of different devices with various operating systems to Cynap Pure SDM to share to a big display device. 3.1. Stand-alone access point mode (without wired network integration) Cynap Pure SDM is operated in stand-alone access point mode. Cynap Pure SDM is acting as DHCP server to provide the addresses to your WLAN devices. Cynap generates an independent WLAN, and WLAN enabled devices (BYOD) can connect to Cynap Pure SDM. Advantages: - No complex network infrastructure necessary - Cynap Pure SDM generates its own stand-alone access point - No connection to internal IT infrastructure - Security issues - no other unit from the internal IT infrastructure can access Cynap Pure SDM Disadvantages: - No devices have internet access 10 WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com 3.2. Cynap Pure SDM wireless network access point mode Cynap Pure SDM integrated via a cable connection into an existing network, and operates in wireless network access point mode additionally. LAN settings for Cynap Pure SDM can be obtained from an existing DHCP server. Cynap Pure SDM generates an independent WLAN, and WLAN enabled (BYOD) can connect to Cynap Pure SDM. Advantages: - All devices can communicate with each other - Cynap Pure SDM has access to the internet. - Cynap Pure SDM can access the internet to check for firmware updates without using additional devices - Security issues BYOD devices over the access point have no access to the existing network and internet. 11 WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Disadvantages: - Performance issues (all traffic is on the same network) Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com Hint: If the units are in different subnets, Cynap Pure SDM might not be able to be discovered automatically by vSolution applications. 12 WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA 3.3. Cynap Pure SDM network infrastructure mode Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com Cynap Pure SDM is integrated to an existing wired network (e.g. Corporate network) wired, and additionally connected to a wireless network (e.g. Guest network as separate VLAN). LAN and WLAN settings for Cynap Pure SDM can be obtained from an existing DHCP server. All devices of the Corporate and also the Guest network can be connected to Cynap Pure SDM. Advantages: - All devices can communicate with each other - Cynap Pure SDM has access to the internet. - Cynap Pure SDM can be moved within the range of the access point - Cynap Pure SDM can access the internet to check for firmware updates without using additional devices 13 WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Disadvantage: - Performance issues (all traffic is on the same network) Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com Hint: If the units are in different subnets, Cynap Pure SDM might not be able to be discovered automatically by vSolution applications. Cynap Pure SDM can also be installed in a VLAN. 14 4. Firewall rules WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com Cynap Pure SDM has firewall rules that must be adhered to in order to allow successful network communications, and the corresponding services to be used. To use services with user defined addresses and ports, be sure these are not blocked by your firewall. Function / Application Airplay Multicast DNS (mDNS) Audio Audio Airplay Video Audio Airplay Bluetooth for Device Discovery Audio Audio AirPlay Airplay Video Audio Chromecast Multicast DNS (mDNS) Discovery Audio Chromecast Chromecast Video data stream Miracast MS-MICE Multicast DNS (mDNS) DHCP RTP Stream RTSP Control MS-MICE Control Port 5353 4100 4101 7000 7100 47000 4100 4101 5000 7000 7100 47000 5353 1900 4100 4164 8008 8009 32768 61000 5353 67 / 68 19000 19007 19010 19017 7236 7250 Touchback 50000 Type Inbound / Outbound Description UDP TCP / UDP UDP TCP TCP TCP Inbound / Outbound Inbound Inbound Inbound Inbound Inbound Multicast DNS (mDNS 224.0.0.251) Bonjour Audio for Airplay Audio for Airplay Primary Airplay communication Airplay video communication Airplay audio communication TCP / UDP Inbound UDP Inbound TCP Inbound TCP TCP TCP Inbound Inbound Inbound UDP UDP TCP / UDP Inbound / Outbound Inbound Inbound TCP Inbound TCP UDP Inbound Inbound /Outbound UDP Inbound UDP Inbound UDP Inbound Audio for Airplay Audio for Airplay AirPlay communication with legacy devices Primary Airplay communication Airplay video communication Airplay audio communication Multicast DNS (mDNS 224.0.0.251) Chromecast discovery Audio for Chromecast Primary Chromecast communication Communication Chromecast Chromecast (video data stream) Multicast DNS (mDNS 224.0.0.251) DHCP communication between device and receiver RTP media traffic port for delivering audio and video TCP TCP TCP Outbound Inbound / Outbound Outbound RTSP control port is used to establish and manage session Control port on which Cynap family system listen for Miracast packets when over existing network mode is enabled This port is for touchback to send mouse events back between Cynap to the Windows computer. If this port is blocked, bi-directional inputs is not possible. 15 Hardware cursor extension Wake On LAN 19020 19027 19030 19037 7 / 9 SSH 22 http, Cynap control 80 UDP UDP TCP TCP WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com Inbound Hardware cursor to reduce latency when using touchback. Inbound / Outbound Inbound Inbound Usually port 7 is used for sending the magic packet Access for Wolfvision support This port used to connect to Cynap web interface (httpd). If this port is blocked, no connection can be made. https, SSL, e.g. 443 Cloud Service, Cynap control NTP 123 PJLink 4352 vSolution Cast Discovery Multicast 50000 Device Discovery 50913 For control purposes 50915 TLS Control 50917 Video streams 50921 Touchback 50922 TCP / UDP Inbound UDP TCP Outbound Outbound UDP Inbound UDP TCP Inbound Inbound TCP Inbound TCP Inbound TCP Outbound This port is used to cloud service and for secure connect to Cynap web for secure connect to Cynap web interface. If this port is blocked, no connection can be made. For optional clock synchronization by a time server (Network Time Protocol, NTP) This is the default port for PJLink and cab be changed in the settings (Peripheral Control) This port is used for device discovery all available Cynap and Visualizer in the network by vSolution applications (uses Multicast IP address 239.255.255.250). If this port is blocked, vSolution applications may not be able to find devices automatically. This port is used for device discovery This port is used for control purposes e.g. room control system, and others). If this port is blocked, no control is possible This port is for secure communication between WolfVision applications (e.g. vSolution App) to Cynap and / or Visualizer. If this port is blocked, secure communication to Cynap and / or Visualizer, inclusive firmware updates are blocked. Video streams between Wolfvision App to Cynap and Visualizer. If this port is blocked, no stream are possible. This port is for touchback between Cynap and Wolfvision App vSolution Cast to send mouse events back to the Windows 16 vSolution App iOS / Android / Windows Discovery Multicast 50000 http, Cynap control 80 https, SSL, e.g. 443 Cloud Service, Cynap control Device Discovery 50913 For control purposes 50915 TLS Control 50917 TLS Control 50917 WebSocket WebSocket 7681 7682 vSolution Link Pro Wake On LAN 7 / 9 DNS 53 WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com computer. If this port is blocked, bidirectional inputs is not possible UDP Inbound TCP TCP Inbound Inbound UDP UDP TCP Inbound Inbound Inbound TCP Inbound TCP TCP Inbound Inbound UDP TCP / UDP Inbound / Outbound Inbound / Outbound This port is used for device discovery all available Cynap and Visualizer in the network by vSolution applications (uses Multicast IP address 239.255.255.250). If this port is blocked, vSolution applications may not be able to find devices automatically. This port is used to connect to the Cynap web interface (httpd). If this port is blocked, no connection can be made. This port is used to cloud services and for secure connect to the Cynap web for secure connect to the Cynap web interface. If this port is blocked, no connection can be made. This port is used for device discovery. This port is used for device discovery. This port is for secure communication between WolfVision applications (e.g. vSolution App) to Cynap and / or Visualizer. If this port is blocked, secure communication to Cynap and / or Visualizer, inclusive firmware updates are blocked This port is for secure communication between Wolfvision application (e.g. vSoltuion Link) t Cynap and / or Visualizer. If this port is blocked, secure communication to Cynap and / or Visualizer, inclusive firmware updates are blocked. User interface communication with Cynap (via browser) User interface communication with Cynap (via fully integrated Visualizer) Wake On LAN Usually port 7 is used for sending the magic packet DNS This port will be used for Domain Name System. If this port is blocked, DNS service are not available 17 http, Cynap control 80 https, SSL, e.g. Cloud Service, Cynap control SMTP Discovery Multicast 443 587 50000 Device Discovery 50913 For control purposes 50915 TCP TCP SMTP UDP UDP TCP WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com Inbound Inbound Outbound Inbound This is the default port to connect to the web interface (httpd) of vSolution Link Pro. Of this port is blocked, connection cannot be established This is the default port to connect to web interface (https) of vSolution Link Pro. If this port is blocked, connection cannot be established. Mail Server Port for communication with SMTP server. This port is used for device discovery all available Cynap and Visualizer in the network by vSolution applications (uses Multicast IP address 239.255.255.250). If this port is blocked, device discovery is not possible Inbound Inbound This port is used for device discovery. If this port is blocked, device discovery is not possible. This port is used for control purposes. If this port is blocked, no control is possible 18 WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA 5. Differences in Open Mode / Protected Mode Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com When using Cynap Pure SDM, it is possible to choose between either Open or Protected Mode in Cynap settings. Modes: Open Mode The open is intended for quick and easy connections and BYOD without the need of high security and big effort for administration. When Open Mode is active, all available devices can connect to Cynap Pure SDM. Additionally, a user password cab be set. In the Open Mode, Airplay, Miracast and / or vSolution Cast PIN can be used to prevent disturbance of external devices. The PIN will be shown on the connected display only (HDMI). Protected Mode This mode allows desired mirroring sessions only, to prevent misuse and disturbances. The moderator has to enable a coming session in front by using the room management system. (The room management system needs be correctly implemented) Mirror Settings To change the security behaviour to grant or deny connection requests. To select which kind of mirroring systems could be connected. Disabled systems couldn't share their content. Possible settings are: · Mode: Open Mode, everybody can connect. Protected Mode, every connection or mirroring has to be enabled by using the room management system. · Miracast for Android devices · AirPlay for iOS devices · Chromecast for Google Chrome · vSolution Cast 19 6. BYOD WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com Cynap Pure SDM is designed to make it as easy as possible for users to connect to it. Cynap Pure SDM supports integrated mirroring protocols in its operating system. Users can connect to Cynap Pure SDM without needing any additional software. The mobile platforms are AirPlay for iOS devices and Miracast for Android and Windows devices. Regarding laptop and computer operating systems, AirPlay is also supported for Mac OS X. Windows Intel Wireless Display is also supported, and this integrates natively with Windows 8.1. AirPlay Support for iOS 5.0 (released 2011) and above, or OS X 10.8 Mountain Lion (released 2012) and above. AirPlay is transmitted via Ethernet / WLAN. It can be used for displaying up to four sources. Miracast Miracast is based on a Wi-Fi direct connection. This means that Miracast can only be used in close proximity to Cynap Pure SDM. Any used cabinet will reduce the possible transmission radius. High WLAN traffic in your environment may reduce the possible radius, increase the delay of picture transfer or results in reduced image quality (MICE support could help to increase the radius, the discovery beacon will be always sent by the dedicated built-in WLAN module. For more information, please refer to the manual. vSolution App The vSolution App allows controlling your Cynap Pure SDM. Using our vSolution App for Android, iOS, macOS, or Windows, with a Cynap system, enables students or work colleagues to receive shared content and to control the unit. On Android, iOS and macOS, you can register your Cynap Pure SDM manually when discovering services are blocked in your network (Bonjour, mDNS). vSolution Cast (Windows) In applications where a Wi-Fi direct connection is not possible due to the installation, multiple Windows devices can be connected at the same time using the alternative vSolution Cast. Chromecast Screen Mirroring Support for Chromecast capable devices. Chromecast is transmitted via Ethernet / WLAN. It can be used for displaying up to four sources. AirPlay, Chromecast, Miracast and vSolution Cast are based on device discovery technologies for maximum ease of use. Therefore it is necessary that the appropriate services (See Firewall rules) are available. Alternatively, when using vSolution Cast, a Cynap Pure SDM IP address can be entered manually. On Windows systems, vSolution Cast can either be run temporarily by users, or permanently installed (copied). The application can also be used from a USB stick without needing administrator rights, however with the restriction that no sound is transmitted. Switching Cynap Pure SDM to standby closes all connections. 20 7. User interface WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com Cynap Pure SDM can be controlled using any current standard browser. The user interface has been developed using the latest web programming standards, and this means that there is no need for additional add-ons or plugins such the Java Platform, in order to have full control of Cynap Pure SDM. HTML5 technology only requires a browser that can handle JavaScript and WebSockets, and this has been state-of-the-art for the last few years. You can also adjust the settings using the remote control (optional). The remote control uses the 2.4 GHz band. The remote control has a built-in gyro sensor and can be used as a digital laser pointer. Cynap Pure SDM can also be used in combination with room management systems. Communication is possible via the Wolfprot protocol. More information about this protocol can be found in the support section of our website www.wolfvision.com . The vSolution App allows smartphones / tablets (iOS, Windows, Android) to control Cynap Pure SDM directly via WLAN. More information about the vSolution App can be found on in the support section of our website www.wolfvision.com . 21 8. Hardware and OS WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com Cynap Pure SDM uses a Linux operating system. The distribution is a WolfVision specific variant, which in addition to the Linux kernel contains only the individual libraries and packages required for the functionality of Cynap Pure SDM. This operating system is efficient, secure and lean. The operating system is installed after the installation process, and every update is installed to a read-only partition that cannot be changed after the installation process. This feature and the strict separation of system and user data, such as pictures, videos etc. ensures a very high level of system security. The system structure is protected against any external access, and it does not require additional security programs (antivirus, firewall, etc.). The Cynap Pure SDM system includes all viewer and software packages, and no additional licenses are required. The current hardware specifications, connectors, delivery, and technical specifications can be found on our website www.wolfvision.com. 9. Administration Cynap Pure SDM can be managed using the vSolution Link Pro software. With vSolution Link Pro software, administration tasks, like firmware updates, can be performed for multiple Cynap systems simultaneously. With this tool, you can also determine the state of your Cynap system and sending a Wake-on-LAN (WoL) command. You can create, manage and distribute a settings profile to all Cynap systems using vSolution Link Pro software, and you can take backups. More information about vSolution Link software can be found in the support section of our website www.wolfvision.com. 22 WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA 10. Bandwidth Measurement Data Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com This bandwidth measurement data has been taken using a notebook PC with a Windows operating system. The computer was connected to Cynap Pure SDM via WLAN, and was operating in network infrastructure mode. 10.1. PowerPoint Presentation Presentation with text and a few graphics are displayed from the notebook and are mirrored to Cynap Pure SDM using vSolution Cast Software to a single connected client. (Traffic Out) Max: 2,9 Mbit/s 10.2. Multimedia from Notebook to Cynap Pure SDM using vCast Software 1080p video (Big Buck Bunny) is displayed on the notebook and is mirrored using the vSolution Cast Software to a single connected client. (Traffic Out) Max: 7 Mbit/s 23 11. Client System Requirements WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com Requirement Airplay Mirroring OS X Mountain Lion v10.8 (Release 2012) or later: Product iMac Mac mini MacBook Air MacBook Pro Mac Pro Version Mid 2011 or later Mid 2011 or later Mid 2011 or later Early 2011 or later Late 2013 or later Requirement Airplay Mirroring iOS 5.0 (Release 2011) or later: Product iPhone iPad iPad iPod touch Version 4 or later 2 or later mini or later 5th generation or later Requirement Miracast: Product Android Microsoft Windows Windows Phone Blackberry Version 4.4.2 or later 8.1, 10, 11 Hardware with Miracast support required 8.1, 10 10.2.1 or later Requirement Chromecast: Product Android Microsoft Windows Version 4.0.3 or later (Chromecast required) 7, 8.1, 10 (Chromecast Browser Plugin required) 24 12. Index WolfVision GmbH Oberes Ried 14 A-6833 Klaus / AUSTRIA Tel. +43-5523-52250 Fax +43-5523-52249 E-Mail: wolfvision@wolfvision.com www.wolfvision.com Version Date Changes 1.0 03.08.2020 Created 1.1 30.11.2020 - Minor text edits - Addition Firewall rules (Miracast / MS-MICE Hardware cursor extension) 1.2 31.07.2023 - Minor text edits - Added firewall rules - Illustrations updated 1.3 18.10.2023 - Addition Firewall rules 25