Speedefy AC2100 Dual Band Gigabit WiFi Router - Quick Start Guide

Product Overview

Front

The front view of the Speedefy AC2100 router is shown. A table details the status light indicators: 'Solid on' for starting up or connected to the Internet, 'Blinking slowly' for failed Internet connection, 'Blinking rapidly' for device connection/removal, and 'Blinking for 2 mins' for WPS connection.

Back

The back view of the Speedefy AC2100 router is depicted, highlighting its ports and buttons. These include a 'Power Port' for the AC adapter, a 'WPS/RST' button (RST for factory reset, WPS for WPS connection), a 'WAN Port' for connecting to the modem, and three 'LAN Ports' (1, 2, 3) for wired devices.

Install Your Router

Follow these steps to install your router:

1. Step 1: Connect your modem. Unplug your modem's power, then connect the modem to the router's WAN port using an Ethernet cable.Diagram Description: A diagram illustrates the initial router setup. It shows an Internet source labeled 'Internet' connecting to a 'Modem' via 'DSL or Cable'. The Modem is then connected to the 'Router's' 'WAN' port using an 'Ethernet Cable'. A 'Power Adapter' is shown connecting to the Router and an electrical outlet. An arrow indicates to 'Flip to the next page to continue with the setup'.
2. Step 2: Power on the modem. Turn on the modem and wait approximately 2 minutes for it to restart.
3. Step 3: Power on the router. Connect the power adapter to the router and plug it into an electrical outlet. Turn the router on.
4. Step 4: Continue setup. Flip to the next page to continue with the setup process.

Note: If your Internet connection comes from an Ethernet outlet, connect the router's WAN port directly to it and proceed to setup method 2 or the Access Point Mode section.

Access Point Mode: For extending an existing network, refer to the Access Point Mode section on the back page.

Set Up Your Router

Method 1: Via Web Browser

1. Connect your device to the router.
   • Wireless: Enable WLAN on your smart device or PC. Find and join the default SSID (e.g., "MyWiFi_XXXXXX") printed on the router's label.
   • Wired: Use an Ethernet cable to connect your computer to one of the router's LAN ports.
2. Connect the router to the Internet.

   Launch a web browser and navigate to http://speedefywifi.com or 192.168.3.1. A login page will appear.

   The router will attempt to detect your connection type automatically (e.g., DHCP). If detection fails, manually select your connection type (DHCP, PPPoE, or Static IP) and follow the on-screen instructions of the Quick Setup Wizard.

Method 2: Via Speedy WiFi App

1. Download the Speedy WiFi App. Search for "Speedy WiFi" on the App Store or Google Play, or scan the provided QR code (QR codes are excluded from output).Screenshots illustrate setting up via the Speedy WiFi App. One shows the app store pages for downloading the app. Another shows a smartphone connecting to the default WiFi network 'MyWiFi_XXXXXX'.
2. Connect your smartphone to the router. Connect your smartphone to the default SSID printed on the router's label.
3. Launch the App. Open the Speedy WiFi App. It will automatically detect your connection type. Follow the in-app instructions to complete the Internet setup.

AP (Access Point) Mode

This mode allows the Speedefy router to function as a WiFi extender, expanding your existing wireless network's range.

1. Connect existing router to Speedefy router. Connect an Ethernet cable from your existing router's Ethernet port to either the WAN or a LAN port on the Speedefy router.Diagram Description: A diagram shows a connection for Access Point Mode. An existing router is connected via an Ethernet cable to the Speedefy router's WAN port.
2. Connect a computer to the Speedefy router. Use an Ethernet cable to connect your computer to a LAN port, or connect wirelessly by joining the default SSID.
3. Log in to the Speedefy router. Open a web browser and go to http://speedefywifi.com. If this is your first setup, follow the Quick Setup Wizard.
4. Enable AP Mode. Navigate to Internet Settings, select "AP" as the connection type, and click Save. The router will reboot to apply the changes.

Ways to Reset the Router

Resetting the router can resolve network issues or password recovery.

• Physical Reset: With the router powered on, press and hold the WPS/RST button on the back for approximately 8 seconds until the Power LED blinks.
• Web Management Reset: Log in to the router's web management page, go to Administration > Device Management, and click "Reset".
• App Reset: Open the Speedy WiFi App, navigate to the Tools page, and tap "Reset". The router will reset automatically.

Change Router Settings

For advanced configurations like port forwarding, use the router's web management page.

1. Connect your device to the router (wired or wireless).
2. Open a web browser and enter http://speedefywifi.com or 192.168.3.1 to access the management page.
3. Adjust router settings as needed.

FAQ (Frequently Asked Questions)

Q1: What connection type to choose if the router failed to detect automatically?

• PPPoE: Use if your ISP provided a PPPoE username and password.
• DHCP: Obtain IP address automatically. Use if your ISP does not provide specific credentials.
• Static IP: Enter configurations provided by your ISP if you have a static IP address.

Q2: Why cannot I access the Internet after installing the router?

• Check Internet access by connecting a computer directly to the modem. If no access, contact your ISP.
• Ensure the router's WAN port is correctly connected to the modem and the indicator light is active.
• For wired devices: Confirm PC connection to a LAN port and ensure PC is set to obtain IP and DNS automatically.
• For WiFi devices: Reboot the router and reconnect. If issues persist, factory reset the router and repeat setup.

Q3: Why cannot I access the web management page?

• Ensure your computer's IP address is set to obtain automatically.
• Disable any proxy servers or VPN software.
• Disable and re-enable your computer's network adapter.
• Verify the URL (http://speedefywifi.com or 192.168.3.1) is entered correctly.
• Try a different web browser or reboot the router.

Q4: How to register an account in Speedy WiFi App?

• Recommended: Sign in using a Third-Party login (e.g., Gmail, Apple ID).
• For email registration: Enter email and password, then click Register. Check your mailbox (including Junk/Spam) for an activation email and click the link. Use common email providers like Outlook, Gmail, or Yahoo if registration fails.

Q5: Why my download speed cannot reach the advertised speed rate?

• 2.4GHz WiFi offers lower speeds than 5GHz WiFi. Wired connections are generally faster than wireless.
• Check for multiple users consuming bandwidth; consider limiting their speed or blocking them via the router settings.
• Verify your ISP's speed plan. Actual speeds may vary due to transmission loss.
• Position the router centrally with antennas upright for optimal wireless performance.
• Use a Cat5e Ethernet cable or better for connecting the modem to the router's gigabit port.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are intended to provide reasonable protection against harmful interference in residential installations.

This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a specific installation. If interference occurs, try the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from the receiver.
• Consult the dealer or an experienced radio/TV technician.

FCC Radiation Exposure Statement

This device complies with FCC radiation exposure limits for an uncontrolled environment and Part 15 of the FCC RF Rules. Installation and operation must follow provided instructions. The antenna(s) must be installed to maintain at least 20 cm separation from all persons and must not be co-located or operated with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution!

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.