Decathlon B100 EASY Basketball Hoop Installation Guide

Safety Instructions

FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE AND WILL VOID WARRANTY.

The owner must ensure that all players know and follow these rules for safe operation of the system.

To ensure safety, do not attempt to assemble this system without following the instructions carefully. Check the entire box and all packing material for parts and/or additional instruction material. Before beginning assembly, read the instructions and identify parts using the hardware identifier and parts list in the document. Proper and complete assembly, use, and supervision are essential for proper operation and to reduce the risk of accident or injury. A high probability of serious injury exists if this system is not installed, maintained, and operated properly.

• If using a ladder during assembly, use extreme caution.
• 2 capable adults are recommended for this operation.
• Check base daily for leakage. Leaks will cause the system to fall.
• Assemble the pole sections properly. Failure to do so could cause pole sections to separate during play or transport.
• Minimum operational height is 6'6" (1.98m) to the bottom of the backboard.

Most injuries are caused by misuse and/or not following instructions. Use caution when using this system.

Parts List

The following hardware is included:

Assembly Instructions

Step 1

Attach pole sections using bolts (G) and nuts (I). Ensure proper alignment.

Diagram shows connecting pole sections with bolts and washers.

Step 2

Connect pole sections using bolts (F), washers (J), and nuts (L).

Diagram shows connecting pole sections with bolts, washers, and nuts.

Step 3

Connect pole section (D) using washers (J) and nuts (L).

Diagram shows connecting a pole section with washers and nuts.

Step 4

Attach caps (C) to the base.

Diagram shows attaching caps to the base.

Step 5

Secure the base with nuts (H) and washers (K). Fill the base with water or sand (46.6L / 102.5 LBS recommended).

Diagram shows securing the base and filling it with water/sand.

Step 6

Insert pin (B).

Diagram shows inserting a pin.

Step 7

Attach the backboard support to the pole using bolts (A2) and nuts (H).

Diagram shows attaching the backboard support.

Step 8

Attach the backboard to the support using bolts (A1) and nuts (H).

Diagram shows attaching the backboard.

Step 9

Attach the rim to the backboard using bolts (A1) and nuts (H).

Diagram shows attaching the rim.

Step 10

Adjust the height of the backboard. Ensure the locking mechanism is engaged.

Diagram shows adjusting the height and locking the mechanism.

Step 11

Final check of all connections. Ensure the system is stable.

Diagram shows a final check of the assembled basketball hoop.

Usage and Maintenance

Regularly check essential parts of the product (backboard, rim, stand, base, fasteners, etc.) to ensure they are in good condition. Failure to perform these regular checks may result in the product tipping over or posing other risks to the user.

Do not hang on the rim, net, or any other part of the system.

Keep your face a safe distance from the backboard, rim, and net during play.

Do not use the base, pole, or frame for climbing, jumping, sliding, or playing.

Do not shake the frame.

The net poses a strangulation hazard.

Do not allow a child to move or adjust the system alone. Moving and adjusting the system is exclusively reserved for an adult.

Before playing, remove jewelry (rings, watches, necklaces, etc.); these items can get caught in the net.

Keep organic materials away from the product. Grass, trash, etc., can cause corrosion or damage to the system.

Check the system's condition (signs of corrosion, such as rust, pitting, peeling) and repaint with an exterior enamel paint if necessary.

If the pole shows signs of pitting corrosion, it must be replaced.

To ensure the longevity of your product, we recommend the following:

• Follow usage and storage instructions.
• Check the system before each use (ballast, loose screws, excessive wear, and signs of corrosion) and perform necessary repairs.
• Regularly inspect and tighten screws and small parts to prevent play and the risk of injury.
• Rinse with clean water or soapy water.

Troubleshooting and Support

STOP

Have questions or missing parts?

DO NOT RETURN THE PRODUCT TO THE STORE! Call your nearest Decathlon store and ask for the sports department representative to perform a product diagnosis and provide further information.

Under warranty and in accordance with usage instructions, you have two options to obtain specific parts:

• Order directly via the website: https://support.decathlon.fr/
• Visit a Decathlon store to order or have parts installed.

ATTENTION! Depending on the seller's diagnosis, not all parts may be covered by the warranty.

Tools are not included.

Weather Warning

Do not use the basketball hoop in winds exceeding 40 km/h (24.8 mph). In case of strong winds, lower the backboard and secure the system.

Diagram shows a basketball hoop in wind and then lowered and secured.