Chicco KeyFit® Max Zip ClearLux Canopy Features Instructions
IMPORTANT: Please also refer to the instructions that came with your product.
Canopy Mesh Panel
-
Open Canopy fully and locate the zipper on the Back Panel. Unzip the zipper slider and remove the zipper pin from the retainer box to separate both sections of the zipper.
[Diagram Description: Illustrates opening the canopy, finding the zipper on the back panel, unzipping it, and detaching the zipper pin from its holder.]
-
Pull the Back Panel Fabric forward to lay flat over the top of the middle Canopy section.
[Diagram Description: Shows the back panel fabric being pulled forward to lie flat.]
-
To close the Mesh Panel, pull the Back Panel Fabric back over the Mesh Panel. Secure both sides of the Zipper together and pull the zipper slider up and over the Canopy to close off the Mesh Panel.
[Diagram Description: Depicts pulling the back panel fabric back, aligning the zipper halves, and sliding the zipper up to close the mesh panel.]
Canopy Privacy Shield
-
With the Canopy fully open, locate the zipper on the Front Panel. Unzip the zipper and fold back the front panel.
[Diagram Description: Shows the canopy open, locating the zipper on the front panel, unzipping it, and folding the front panel back.]
-
Remove the Privacy Shield from the Front Panel section. Pull the Privacy Shield forward, and drape the shield over the car seat. Secure the Privacy Shield using 4 magnets. Locate 2 magnets (a) on the front corners of the car seat. Next locate and secure 2 magnets (b) below the seat belt guide on each side of the car seat. Make sure the magnets are always secured. DO NOT let unsecured privacy shield hang loose.
[Diagram Description: Illustrates removing the privacy shield, draping it over the car seat, and securing it with four magnets: two at the front corners (a) and two below the seat belt guides on each side (b). Emphasizes securing magnets to prevent the shield from hanging loosely.]
-
To store the Privacy Shield, undo all 4 magnets.
[Diagram Description: Shows the process of undoing the four magnets.]
-
Fold up the Privacy Shield and lay it over the front section of the Canopy. To avoid bunching, fold the Privacy Shield once and lay flat inside the zipper pouch. Pull the Front Panel Fabric forward and over the Privacy Shield. Zip the Zipper closed.
[Diagram Description: Depicts folding the privacy shield, placing it flat inside the canopy's zipper pouch, pulling the front panel fabric over it, and zipping it closed.]
Cleaning Instructions
Fabrics may be hand washed using mild soap and water, or machine washed in cold water on delicate cycle using mild detergent. The canopy should be hand washed or wiped with a damp cloth and mild detergent. Hang to dry. DO NOT BLEACH. Please consult your product manual for additional care and maintenance instructions.
Contact Chicco Customer Service at 1-877-424-4226 for assistance or additional information.
