ENHET Swivel Shelf

Parts Included

• 1x Part 10053968: Cylinder-shaped component
• 1x Part 10053952: Spring-like component
• 1x Part 100006: L-shaped tool (Allen key)

Assembly Instructions

1. Step 1: Insert the rod into the circular base component (10053968). A magnified view shows the threaded connection.

   Visual Aid: A rod is being inserted into a disc-shaped component with a threaded hole.

2. Step 2: Attach the second circular base component to the rod. Use the L-shaped tool (100006) to secure a screw connecting the rod to the base.

   Visual Aid: The rod with the first base is shown. The second base is attached, and an Allen key is used to tighten a screw.

3. Step 3: Attach the clamp mechanism to a shelf or frame. The clamp is designed to grip edges. Use the threaded screw (100006) to tighten the clamp onto the surface.

   Visual Aid: A C-shaped clamp is shown being attached to the edge of a shelf. A hand is shown tightening a screw on the clamp. A warning symbol [⚠] is displayed next to a diagram showing incorrect tightening.

4. Step 4: Slide the assembled two-tiered rod structure onto the clamp mechanism attached to the shelf.

   Visual Aid: The assembled swivel shelf unit is shown being slid downwards onto the clamp.

5. Step 5: Secure the rod within the clamp. The diagram shows the rod fitting into the clamp and being held in place.

   Visual Aid: A close-up shows the rod fitting into the clamp opening. An upward arrow indicates the rod being inserted.

6. Step 6: Final tightening of the clamp to secure the swivel shelf unit to the shelf or frame.

   Visual Aid: An upward arrow shows the clamp being tightened from below the shelf.

7. Step 7: Ensure correct installation. The diagram shows the shelf unit correctly positioned and secured. An incorrect example shows the unit tilted or improperly fastened, marked with a cross [❌].

   Visual Aid: Two diagrams illustrate correct and incorrect placement/securing of the swivel shelf.