ELKO EP - Global relay manufacturer • ELKO EP
User Manual for ELKO models including: 8315, 8316, 8317, Luxury Version Wireless Shutter Control, Wireless Shutter Control, Shutter Control, Control
WIRELESS SHUTTER CONTROL - LUXURY • ELKO EP
BEZDRÁTOVÉ OVLÁDÁNÍ ROLET - LUXURY • ELKO EP s.r.o
File Info : application/pdf, 10 Pages, 209.38KB
DocumentDocumentWIRELESS EN SHUTTER CONTROL (LUXURY VERSION) Combination of iNELS wall-mounted wireless controller and shutter switching device. Package Glass touch controller - 4 buttons, SHARP RFGB-40/W, RFGB-40/B Glass touch controller - 4 buttons, ROUND RFGB-240/W, RFGB-240/B Switch unit for shutters RFJA-32B-SL EAN 8595188183154 (Glass touch controller - 4 buttons, BLACK SHARP + Switch unit for shutters) EAN 8595188183161 (Glass touch controller - 4 buttons, WHITE SHARP + Switch unit for shutters) EAN 8595188183178 (Glass touch controller - 4 buttons, BLACK ROUND + Switch unit for shutters) EAN 8595188183185 (Glass touch controller - 4 buttons, WHITE ROUND + Switch unit for shutters) Range up 200 m The individual elements in the iNELS set are paired and their functions are preset. iNELS kit for shutters enables it´s remote control. UP/STOP shutters no.1 UP/STOP shutters no.2 DOWN/STOP shutters no.1 DOWN/STOP shutters no.2 The settings of the wall controllers can be changed - see detailed manuals of iNELS elements. Glass touch controller - 4 buttons, SHARP/ROUND, RFGB-40/RFGB-240 RFGB-40/B glass touch controller, SHARP - black, 4-buttons RFGB-40/W glass touch controller, SHARP - white, 4-buttons RFGB-240/B glass touch controller, ROUND - black, 4-buttons RFGB-240/W glass touch controller, ROUND - white, 4-buttons Characteristics · The wireless control - used to control, lights, gate, garage door, shitters, etc. · Thickness only 8 mm. · 4 capacitive buttons allow you to control 2/4 components. · Fast installation on any surface - the rear base allows screwing to the walls, gluing with doublesided tape or just laying on the table Detailed manual RFGB-40 RFGB-240 Replacement of a battery in 3 steps Press to open the plug-in battery holder (you can use a flat-blade screwdriver to open it).. Insert the CR2032 battery into Battery holder. Watch out for polarity. Insert the holder into the device. Assembly Adhesive Peel off one protective layer on the doublesided adhesive sheets and stick them to the marked places on the controller. Peel off the second protective layer on the doublesided adhesive sheets and place the control in the prepared place. If the device is installed on glass, cover it with a cover foil In the installation box or on the wall Mount the snap bar on the controller into the installation box or on the wall Place the mounting jig on the KU box and screw it on Snap on the controller. Technical parameters Power voltage: Battery life: Transmission indication Number of capacitive buttons: Communication Protocol: Frequency: Signal transmission method: Range: Material: Other data Operating Temperature: Working Position Mounting: Protection Pollution degree: Dimension: Weight: Related standards: RFGB-40/RFGB-240 2x 3 V battery CR 2032 about 2 years depending on the frequency of use Red LED 4 RFIO2 868.5 MHz one-way addressed message in the open up to 200 m Glass -10 ... +50 °C (14 ... 122 °F) any adhesive, screw IP20 2 SHARP 94 x 94 x 8 mm (3.7" x 3.7"x 0.3") / ROUND 100 x 100 x 8 mm (3.9" x 3.9" x 0.3") SHARP 107 g/ ROUND 108 g EN 60669, EN 300 220, EN 301 489 Notes ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. ................................................................................................................................................................................................................................................. Switch unit for shutters RFJA-32B-SL Detailed manual Characteristics · The switching unit for blinds has 2 output channels used to control garage doors, RFJA-32B-SL gates, blinds, awnings, etc... · It can be combined with system components iNELS RF Control2 with RFIO2 protocol. · The BOX design lets you mount it right in an installation box, a ceiling or motor drive cover. · Short presses of the controller enable tilting of lamellas, and a long press enables you to draw the blinds up or down to the end position. · Each of the units may be controlled by up to 25 channels (1 channel represents one assigned controller). · The programming button on the unit is also used for manual control of the output. · For components it is possible to set the repeater function via the RFAF / USB service device. · Range up to 200 m (in open space), if the signal is insu cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature. · Communication frequency with bidirectional protocol iNELS RF Control2 (RFIO2). Installationoptions mounting into a non-conducting drive housing flush mounting ceiling mounted Technical parameters Supply voltage: Apparent input: Dissipated power: Supply voltage tolerance: Output: Number of contacts: Rated current: Switching power: Peak current: Switching voltage: Control: RF, by command from transmitter: Manual control: Other data: Operating temperature: Operating position: Mounting: Protection: Overvoltage category: Dimensions: Weight: Related standards: RFJA-32B-SL 230 V AC / 50 - 60 Hz 7 VA / cos = 0.1 0.7 W +10 -15 % 2x switching (AgSnO2) 8 A / AC1 2000 VA / AC1 10 A / <3 s 250 V AC1 868.5 MHz PROG (STOP, , STOP, ) -15 ... + 50 °C (5 ... 122 °F) any free at lead-in wires IP30 III. 43 x 44 x 22 mm 45 g EN 60730, EN 63044, EN 300 220, EN 301 489 Connection S S NL M L N PE Indication, manual control ·LED STATUS - indication of the device status. · Manual control is performed by pressing the PROG button. · Programming is performed by pressing the PROG button for more than 1s. · Terminal block for connection of buttons. IN1 - direction button up IN2- button down. In the programming and operating mode, the LED on the component lights up at the same time each time the button is pressed - this indicates the incoming command 1 1. LED / button PROG 2. Addresses for individual relays (channels) 3. Terminal block - connection for external button 4. Terminal block - connecting the neutral conductor 5. Terminal block - load connection 6. Terminal block for connecting the phase conductor 2 3 5 4 6 Radiofrequency signal penetration through various construction materials Range up to 200 m in open space, if the signal is insu cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that supports this feature. RFRP-20 x 60 - 90 % brick walls 80 - 95 % 20 - 60 % wooden structures with plaster boards reinforced concrete 0 - 10 % metal partitions 80- 90 % common glass Warning Instruction manual is designated for mounting and also for the usafe of the device. It is always a part of its packing. Installation and connection can be carried out only by a person with adequate professional qualification with understanding this instruction manual and functions of the device, and while observing all valid regulations. Trouble-free function of the device also depends on transportation, storing and handling. In case you notice any sign of damage, deformation, malfunction or missing part, do not install this device and return it to its seller. It is necessary to treat this product and its parts as electronic waste after its lifetime is terminated. Before starting installation, make sure that all wires, connected parts or terminals are de-energized. While mounting and servicing observe safety regulations, norms, directives and professional, and export regulations for working with electrical devices. Do not touch parts of the device that are energized life threat. Due to transmissivity of RF signal, observe correct location of RF components in a building where the installation is taking place. RF Control is designated only for mounting in interiors. Devices are not designated for installation into exteriors and humid spaces. The must not be installed into metal switchboards and into plastic switchboards with metal door transmissivity of RF signal is then impossible. RF Control is not recommended for pulleys etc. radiofrequency signal can be shielded by an obstruction, interfered, battery of the transceiver can get flat etc. and thus disable remote control. Designed & Manufactured by: ELKO EP, s.r.o. Palackého 493, 769 01 Holesov, Vsetuly, Czech republic, www.elkoep.com, Hotline: +420 800 100 671