TOA Canada - Audio Equipment Manufacturer
Contact | TOA Canada Corporation
Owner's Manual for Powersoft models including: AMP-1200FHL-DSP 1200W Digital Multi Channel Amplifier, AMP-1200FHL-DSP, 1200W Digital Multi Channel Amplifier, Digital Multi Channel Amplifier, Multi Channel Amplifier, Channel Amplifier
Apr 3, 2025 — The Quattrocanali DSP Series is specifically designed for installation applications. In just 1. RU, Quattrocanali offers smaller.
File Info : application/pdf, 2 Pages, 1.28MB
DocumentDocumentTOA Canada Corporation Made in Italy For inquiries, contact us @ www.toacanada.com/inquiry. AMP-1200FHL-DSP Digital Multi-Channel Amplifier (1200W x 4 Channels @ 70V) (1200W x 4 Channels @ 4/8) with Built-in DSP The Quattrocanali DSP Series is specifically designed for installation applications. In just 1 RU, Quattrocanali offers smaller dimensions, lighter weight and the traditionally amazing sound quality and reliability of all Powersoft products. Quattrocanali DSP amplifiers implement a high efficiency microprocessor controlled power supply with built in PFC (Power Factor Correction) that allows flawless worldwide operation with any AC mains voltage in the range 90-264 VAC tolerant to peak up to 400 VAC. The patented SRM (Smart Rails Management) technology allows to maximize the efficiency of the system and drastically reduce power consumption at any load and usage condition. A secondary high efficient power supply is present to keep the system responsive at any operating condition, so that system check and monitoring can be performed even in stand-by and deep-sleep modes. Quattrocanali DSP Series is designed to work with lo-Z (from 2) and with 70V/100V distributed lines: any mixed configuration of low and high impedance output loads can be realized, making the Quattrocanali Series suitable to applications in installed audio systems. DSP versions of the Quattrocanali series extends system performance with on board high-end signal processing. f Small to medium-scale venues f Main systems, central or distributed, subwoofers, hi-Z/lo-Z f Mission critical applications f Shops, stores f Theatres, restaurant, and bars f Houses of worship f Convention centres f Business centres f Cruise ships www.TOAcanada.com AMP-1200FHL-DSP Digital Multi-Channel Amplifier (1200W x 4 Channels @ 70V) (1200W x 4 Channels @ 4/8) with Built-in DSP Specifications Channel Handling Number of output channels Number of input channels Analog 4 Hi-Z or Lo-Z (bridgeable per ch. pair) Phoenix PC 5/8-STF1-7,62 4 Phoenix MC 1,5/12-ST-3,81 Audio Input sensitivity @ 8 with 26 dB Gain Input sensitivity @ 8 with 29 dB Gain Input sensitivity @ 8 with 32 dB Gain Input sensitivity @ 8 with 35 dB Gain SNR (20 Hz - 20 kHz @ 8 - Typical) Max input level Frequency Response Crosstalk (1 kHz) Input impedance THD+N (from 0.1 W to Half Power) SMPTE IMD (from 0.1 W to Half Power) Slew Rate Output impedance at 100 Hz 4804 4.91 Vrms 3.48 Vrms 2.46 Vrms 1.74 Vrms 110 dB(A) 20 dBu 20 Hz - 20 kHz ±1.0 dB, 1 W @ 8 typical -70 dB 20 k balanced < 0.1% (typical < 0.05%) < 0.1% (typical < 0.05%) > 50 V/µs @ 8 , input filter bypassed 26 m DSP AD converters DA converters Sample rate converter Internal precision Latency Memory/Presets Delay Equalizer Crossover Limiters Damping control 24 Bit TandemTM @ 48 kHz typical 125 dB-A Dynamic Range - 0.005 % THD+N 24 Bit TandemTM @ 48 kHz typical 117 dB-A Dynamic Range - 0.003 % THD+N 24 Bit @ 44.1 kHz to 96 kHz typical 140 dB Dynamic Range - 0.0001 % THD+N 32 bit floating point 2.5 ms fixed latency architecture 49 amplifier snapshots, virtually unlimited speaker presets 2 s (input) + 100 ms (output) for time alignment Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR) TruePowerTM, RMS voltage, RMS current, Peak limiter Active DampingControlTM and LiveImpedanceTM measurement Data subject to change without notice Maximum output power Output Stage per channel @ 8 (symmetrical)* per channel @ 4 (symmetrical)* per channel @ 2 (symmetrical)* @ 4 Bridged (symmetrical)* @ 8 Bridged (symmetrical)* @ Hi-Z distributed line 100 V (symmetrical)* @ Hi-Z distributed line 70 V (symmetrical)* per channel @ 8 (asymmetrical)** per channel @ 4 (asymmetrical)** per channel @ 2 (asymmetrical)** @ Hi-Z distributed line 100 V (asymmetrical)** @ Hi-Z distributed line 70 V (asymmetrical)** Maximum unclipped output voltage @ 8 Maximum output current **:*A: Mll cahxaimnnuemlspdorwiveern-swhiatrhintghecaspaamceitybupresrtcphoawnenrel 4804 1200 W 1200 W 1500 W 3000 W 2400 W 1200 W 1200 W 1300 W 2600 W 1800 W 2200 W 2100 W 139 Vpeak 45 Apeak Power & Thermal 4804 @ 115 V Idle 1/8 Power @ 4 Idle 1/8 Power @ 4 Power Current Draw Thermal Loss Power Current Draw Thermal Loss Power Current Draw Thermal Loss Power Current Draw Thermal Loss 31.3 W 0.47 Arms 107 BTU/h 823 W 7.7 Arms 760 BTU/h 31.6 W 0.27 Arms 108 BTU/h 840 W 4.3 Arms 818 BTU/h @ 230 V Power supply Universal regulated switch mode with PFC, SRM Nominal voltage (±10%) 100-240 VAC @ 50-60Hz Operating Voltage AC Mains connector 90-264 VAC IEC C20 inlet (20 A max) region-specific power cord provided Typical use case power consumption is expected to be at least 20% lower (likely more than 50% lower) Networking Standards compliance Supported topologies Remote interface Construction Dimensions Weight auto-sensing Fast Ethernet (IEEE 802.3u, 100 Mbit/s) Star ArmoníaPlusTM 483 x 44.5 x 358 mm 19.0 x 1.75 x 14.1 in 7 Kg (15 lb) www.TOAcanada.com