Samsung Full Motion Slim Wall Mount Installation Guide

Step 1: Connect Cables

Before installing the wall mount, connect the power cable or OC cable to the TV.

Diagram Description: Shows a TV with cables being connected to the back before wall mounting.

Step 2-A: Mounting with M8 Screws

Ensure that component B-C is turned at least three and a half revolutions and tightened securely. Use the supplied tool to tighten the component securely.

Diagram Description: Illustrates attaching the wall mount brackets to the TV using M8 screws (B, C). This step is shown for various compatible Samsung TV models including A-DU8000~9000, Q60~70A-D, Q80C/D (55", 65", 75", 85"), QN80-95A-D, LS03A-D, S95C/D, QN700-900A-D, A-DU7000, Q80A/B, Q80C/D (50"), S95B, S85D, S90B-D. The diagram shows the screws being inserted and tightened.

Step 2-B: Mounting with M5 Screws

Ensure that component is turned at least three and a half revolutions and tightened securely. Use the supplied tool to tighten the component securely.

Diagram Description: Illustrates attaching the wall mount brackets to the TV using M5 screws (G). This step is also shown for compatible Samsung TV models. The diagram shows the screws being inserted and tightened.

Step 3: Wall Type Considerations

Install by referring to the standard installation conditions for each wall type (provided in a separate sheet). If the wall is not made of concrete, make sure to contact a professional for assistance. Do not fix it to drywall without any reinforcement. A standard stud distance is supported (16 inches). To fix the wall mount on wood, drill holes (3 mm) before attaching the screws.

Diagram Description: Shows different wall types: Concrete/Brick and Dry Wall. For Concrete/Brick, it indicates using screws (like M8x65mm) and possibly anchors, with a 3mm pilot hole. For Dry Wall, it emphasizes the need for reinforcement and mentions standard stud spacing (16 inches). It also shows the required screw size (65mm) and pilot hole size (3mm) for wood installation.

Step 4: Cable Management and Access

To remove the OC cable from 43" to 75" models that use an OC cable, first remove the TV from the wall mount.

To connect a cable to the USB2.0 port on 43" to 55" models that use an OC cable, first remove the TV from the wall mount.

Diagram Description: Illustrates the process of removing the TV from the wall mount to access the OC cable or to connect a cable to the USB2.0 port on specific model size ranges (43"-75" for OC cable removal, 43"-55" for USB2.0 connection).