THERMO-HUNTER CS Series
Stationary-Type Non-Contact Thermometer
For installation in limited space
Key Features
- Ultra-Compact Sensor Head: World's smallest-class sensor head (M12 x 30 mm) ideal for installation in limited space, allowing mounting on a wide variety of equipment in manufacturing lines.
- Heat-Resistant: Sensor head and cable are heat resistant up to 180°C (356°F), eliminating the need for water cooling in high-temperature environments. (Low- and medium-temperature models are heat resistant to 100°C / 212°F).
- High Environmental Durability: Industry's highest level of waterproof performance with IP69K protection (DIN 40050-9), ensuring problem-free use even in high-pressure sterilization washing and harsh manufacturing environments.
- Visible and Operable Design: Features a large, easy-to-read 7-segment digital display and user-friendly buttons for enhanced visibility and operability, even when mounted on equipment.
- 2-Point Teaching Function: Simplifies temperature adjustment by allowing setting of upper and lower limits for the measurement target.
-
Versatile Measurement Modes:
- Bank function: Save settings independently for up to 4 banks.
- Output scaling function: Customize the temperature range for the 4-20 mA analog output.
- Trigger function: Control output based on synchronization input (External trigger, Wave trigger, MAX, MIN, P-P, SAMPLE hold).
- Optional Laser Pointer: Facilitates precise positioning, especially with small sensor heads, designed to match the sensor head's shape for easy alignment.
Illustration depicting temperature control of iron plates in hamburger cooking machines.
Illustration showing temperature control during sprocket molding.
Image of the THERMO-HUNTER CS series digital display showing measured values.
Diagram illustrating the 2-point teaching function with a graph comparing 'Energy amount' with and without teaching.
Illustration of the optional laser pointer accessory for precise alignment.
Specifications
| Parameter | Low-medium-temperature models (standard) | High-temperature models (heat-resistant head) |
|---|---|---|
| Model | CS-30TAC, CS-40TAC | CS-30TAC-HT, CS-40TAC-HT |
| Measurement range | -40 to 500°C (-40 to 932°F) | 0 to 1000°C (32 to 1832°F) |
| Field of view | CS-30TAC: Ø30/500 mm (22:1) CS-40TAC: Ø40/500 mm (15:1) |
CS-30TAC-HT: Ø30/500 mm (22:1) CS-40TAC-HT: Ø40/500 mm (15:1) |
| Optics | Silicone lens | |
| Sensing element/spectral response | Thermopile/8 to 14 µm | |
| Response time | 150 ms/90% response | |
| Accuracy*¹ | -40 to 0°C (-40 to 32°F): ±3°C (5.4°F) 1 to 200°C (33.8 to 392°F): ±2°C (3.6°F) 201 to 500°C (393.8 to 932°F): ±1% of reading value |
0 to 200°C (32 to 392°F): ±2°C (3.6°F) 201 to 1000°C (393.8 to 1832°F): ±1% of reading value |
| Repeatability | Up to 200°C (392°F): ±1.0°C (1.8°F), 201°C (393.8°F) or more: ±0.5% of reading value | |
| Emissivity adjustment | 0.1 to 1.2 | |
| Display resolution | 1°C increments | |
| Analog output | 4 to 20 mA | |
| Output Resolution | 0.5°C increments | |
| Output Accuracy | ±0.5% or ±1.0°C (1.8°F) | |
| Update time | 10 ms | |
| Allowable load | 250 Ω | |
| Impedance | 47 Ω | |
| Control output | Photo MOS FET x 2 (Transfer contact x 2) | |
| Capacitive load | 300 mA/30 VDC or less | |
| Interface | Digital output | |
| Functions | Teaching function: 2 points, Response time selection (DELAY) function: 1 (0.15 sec.) to 200 (approx. 10 sec.), Output scaling function | |
| External input | Bank function: 4 banks, Synchronous input trigger function, External trigger function, Wave trigger function | |
| Degree of protection | Sensor head: IP69K (DIN 40050 Part 9) Amplifier: IP40 (IEC 60529) |
Sensor head: IP69K (DIN 40050 Part 9) Amplifier: IP40 (IEC 60529) |
| Vibration resistance | 10 to 55 Hz; amplitude 1.5 mm; 2 hours in each of the X, Y, and Z directions | |
| Supply voltage | 12 to 24 VDC ±10% | |
| Current consumption | 120 mA (at max. load) / 80 mA (in Eco mode) | |
| Ambient temperature | Sensor head: 0 to 100°C (32 to 212°F) Amplifier: 0 to 65°C (32 to 149°F) |
Sensor head: 0 to 180°C (32 to 356°F) Amplifier: 0 to 65°C (32 to 149°F) |
| Ambient humidity | 35 to 85% RH (no condensation) | |
| Storage temperature | 0 to 70°C (32 to 158°F) | |
| Dimensions | Sensor head: M12 (ø14) x 34 mm Amplifier: 35 x 52 x 38.5 mm |
Sensor head: M12 (ø14) x 34 mm Amplifier: 35 x 52 x 38.5 mm |
| Weight | Sensor head: Approx. 100 g (including 3 m cable) Amplifier: Approx. 200 g (including 2 m cable) |
Sensor head: Approx. 100 g (including 3 m cable) Amplifier: Approx. 200 g (including 2 m cable) |
| Material | Sensor head: SUS Amplifier: ABS Sensor cable: PVC (low-medium-temperature models) / Silicone rubber (high-temperature models) |
Sensor head: SUS Amplifier: ABS Sensor cable: PVC (low-medium-temperature models) / Silicone rubber (high-temperature models) |
*1 The measurement accuracy in the specification is limited to the calibration conditions of our factory. Note that specifications are subject to change without prior notice for product improvement purposes.
Dimensions
Detailed dimension drawings are available for the sensor head, amplifier, and mounting bracket.
Sensor Head: Standard dimensions are M12 (ø14) x 30 mm. The cable can be cut to any length (ø4 x 3000 mm max.).
Amplifier: Dimensions are 35 x 52 x 38.5 mm.
Mounting Bracket (CS-FB12): Specific mounting dimensions are provided in detailed drawings.
Cable: Standard cable dimensions are ø6 x 2000 mm (max.).
Diagrams illustrating the field of view (spot size at distance) for CS-30TAC and CS-40TAC models, with and without a CF lens.
Detailed dimension drawings for the THERMO-HUNTER CS series sensor head, amplifier, and CS-FB12 mounting bracket.
Diagram showing the dimensions and maximum length of the sensor head cable.
Options and Accessories
Laser pointer (CS-LDP)
A laser pointer makes precise positioning easy, even with a small head, which is difficult with a conventional setup. Designed to be the same shape as the sensor head, laser pointers can be easily used during alignment. This product uses a Class 2 laser that conforms to IEC 60825-1.
Laser Pointer Specifications: Supply voltage: 3.0 VDC ±10%; Wavelength: 630-670 nm; Maximum Power: <1mW (CLASS 2); Beam Divergence: <1mrad; Optical Axis Accuracy: ±2°; Ambient Temperature: 0 to 40°C; Environmental Humidity: 35 to 85%RH (without dew condensation); Storage Temperature: -10 to 60°C; Vibration Resistance: 10 to 55Hz, 1.5 mm amplitude, 2 hours each for XYZ directions with packaging; Degree of Protection: IP40 (IEC 60529); Materials: Stainless Steel; Weight: Approx. 60 g; Applicable Regulations: RoHS Directive (2011/65/EU), China RoHS (MIIT Order No.32), FDA Regulation (21CFR 1040.10 and 1040.11); Applicable Standards: IEC 60825-1.
CF lens (CS-CF01)
Used for micro-point measurement. Note that the amount of light received from the measurement target is attenuated by 20 to 30%, requiring emissivity adjustment.
Air purge pipe (CS-AP1)
Accessory for maintaining sensor cleanliness.
Mounting bracket (CS-FB12)
Designed for secure mounting of the sensor head.
Black tape for glossy objects (HB-250)
Helps improve measurement accuracy on highly reflective surfaces.
Images of optional accessories: CS-LDP Laser pointer, CS-CF01 CF lens, CS-AP1 Air purge pipe, CS-FB12 Mounting bracket, and HB-250 Black tape for glossy objects.
