GPS模块_北斗模块_WiFi模块_蓝牙模块_深圳市天工测控技术有限公司-深圳市天工测控技术有限公司
WiFi Module|Bluetooth Module|GPS Module|Beacon-SKYLAB
User Manual for SKYLAB models including: F207 Real time tracking Remote Training Collar Tracer, F207, Real time tracking Remote Training Collar Tracer, Remote Training Collar Tracer, Training Collar Tracer, Collar Tracer
Download - Skylab
Real Time 4G GPS Dog Tracking Device F207 - Skylab
File Info : application/pdf, 16 Pages, 1,004.62KB
DocumentDocumentSkylab M&C Technology Co.,Ltd. F207 User manual F207 User manual Real-time tracking | Remote Training Collar Tracer Document information Title Document type Document number Revision and date Disclosure restriction F207 Real-time tracking | Remote Training Collar Tracer User manual SL-22050244 V1.01 17-May-2022 Public 1/16 F207-UM-005,A/1 Skylab M&C Technology Co.,Ltd. F207 User manual Revision History Version V1.01 Description Initial version Make Wilson Date 20220517 Product list NO. 1 2 3 4 5 6 product name GPS tracker Magnetic suction USB charging cable Screwdriver Operation instruction Warranty card Conformity certificate Amount 1 1 1 1 1 1 Remark SKYLAB reserves all rights to this document and the information contained herein. Products, names, logos and designs described herein may in whole or in part be subject to intellectual property rights. Reproduction, use, modification or disclosure to third parties of this document or any part thereof without the express permission of SKYLAB is strictly prohibited. The information contained herein is provided "as is" and SKYLAB assumes no liability for the use of the information. No warranty, either express or implied, is given, including but not limited, with respect to the accuracy, correctness, reliability and fitness for a particular purpose of the information. This document may be revised by SKYLAB at any time. For most recent documents, visit www.skylab.com.cn. Copyright © 2022, Skylab M&C Technology Co., Ltd. SKYLAB® is a registered trademark of Skylab M&C Technology Co., Ltd in China 2/16 F207-UM-005,A/1 Skylab M&C Technology Co.,Ltd. F207 User manual Contents 1. Product Introduction.............................................................................................................................................. 4 2. Functional Characteristics....................................................................................................................................4 3. Product Parameter................................................................................................................................................ 4 4. LED Indicator Definition........................................................................................................................................5 5. Device Start up.......................................................................................................................................................6 6. APP and SMS instructions................................................................................................................................... 7 7. Download phone APP.........................................................................................................................................11 8. Log in by website and phone APP....................................................................................................................11 8.1 Log in by Phone APP................................................................................................................................11 8.2 App usage introduction............................................................................................................................ 13 8.2.1 Dog training function..................................................................................................................... 14 8.2.2How to use health Oversee interface.......................................................................................... 15 9. Faults & The solutions........................................................................................................................................ 15 10. Cautions..............................................................................................................................................................16 11. Contact information........................................................................................................................................... 16 3/16 F207-UM-005,A/1 Skylab M&C Technology Co.,Ltd. F207 User manual 1. Product Introduction This product is based on LTE / GPRS network and GPS satellite positioning system. It is the most technologically advanced dual positioning of GPS and AGPS. IPX-68 waterproof professional is designed for individuals and hound. A new pet tracker and activity state 4G GPS locator for pets. Figure 1 F207 Product picture 2. Functional Characteristics Real-time tracking / AGPS assisted positioning; Upload methods: timing, real-time mode; Vibration dog training in multiple modes, and its own speaker; Virtual fence / history track playback / displacement / low power alarm etc., alarm data upload to cloud background; Real-time health oversee (sleep, step counting); LED indicator: charging, GPS, communication, dog training status; 3. Product Parameter Product name Model Suitable Object 4G PetDog trainingGPS Tracker F207 Dog and other medium or large-sized animals 4/16 F207-UM-005,A/1 Skylab M&C Technology Co.,Ltd. F207 User manual 4G BandsOption Network Battery Start-up time LTE Module GPS accuracy GPS sensitivity Operating temperature Operating humidity Storage temperature IP grade SIM card Dimension Weight A/North America version A: LTE-FDD--B2/B4/B12; WCDMA--B2/B5 Europe version E: LTE-FDD--B1/B3/B5/B7/B8/B20 LTE-TDD--B38/B40/B41 WCDMA--B1/B5/B8;GSM--900/1800MHz South America SA: LTE-FDD--B1/B2/B3/B4/B5/B7/B8/B28 LTE-TDD--B40 WCDMA--B1/B2/B5/B8;GSM--850/900/1800/1900MHz GSM/GPRS/LTE Polymer lithium battery Cold start 35s-80s Hot start 1s 10m Sim7600 -159dBm -20~70 5%-90% Noncondensing -40 85 Soak in 1.5m water depth Nono-cardself-bouncing card 88*44*32mm 65g 4. LED Indicator Definition Red indicator - System indicator Status of indicator Flash 5/16 Meaning Normal working F207-UM-005,A/1 Skylab M&C Technology Co.,Ltd. F207 User manual Not bright Standby or fault Green indicator - GSM/LTE signal indicator Status of indicator Meaning Continuously in bright status Communication initialization Flash Communication is normal Not bright Standby or fault Blue light -GPS signal indicator Status of indicator Meaning Continuously in bright status Searching for GPS signals Flash GPS signal is normal Not bright Standby or fault Note: When the device is in power-saving sleep mode, the device will be shut down after 5 minutes (configurable) if there is no operation indicator. 5. Device Start up 1. Open the USB rubber plug by hand, Insert a Nano SIM card support LTE/GSM/GPRS network into the slot and make sure the chip side is up. 2. Switch the power button,the device would turn on. 3. Set admin number, by sending a SMS command to the SIM card inside device. For example: admin123456 86132******** (86132********should be your phone number). 4. Set APN: APN123456 CMNET (please use your local APN instead of CMNET, if you do not know the APN content,you should contact your SIM card supplier) Or Start up (that to active device) The three steps to activate the device connection platform are as follows: 1. Open the cover by screwdriver, Insert a nano SIM card support LTE/ GSM/GPRS network into the slot and make sure the chip side is up. 6/16 F207-UM-005,A/1 Skylab M&C Technology Co.,Ltd. F207 User manual 2. Turn on the unit outdoors by Pushing the button to"On"the indicator is on. (when the green light and blue light are both flashing , you can do setting by step as below:) Set admin number,APN and open GPRS as below: Step SMS format for setting Reply from uni 1.Set admin admin123456+space+your phone number Admin OK 2.Set APN(abroad) apn123456+ space+local apn APN OK content 3.Set IP or domain (Factory SZCS,123456,DOMAIN=a.lk SET IP OK default) gps.net:7700 4.Query parameters Param1 Software version, ID, IP address, port, domain name, and APN 5.Detection signal status status BAT: 6; GPRS: 1; GSM: 2; GPS: 1; ACC: 0; Oil: 0; Power: 1; S: 0 6.Dialing the device Get latitude and longitude and Google location links to activate the device 6. APP and SMS instructions Function Master number Descriptions Set the mobile phone number for receiving alarms APP support YES SMS support YES Command Format admin123456 cell-phone number Frequency of upload Set the frequency of uploading device location and other information(Unit: second) YES YES Upload123456 frequency Time zone Sensitiveness to shock Power saving mode Setting the Device Time Zone YES Set vibration sensitivity of equipment YES In power-saving mode, YES vibration cannot wake up the YES YES YES Timezone123456, time zone vibxyz123456,3,5,5,5 sleep123456 time 7/16 F207-UM-005,A/1 Skylab M&C Technology Co.,Ltd. device, GPS is off, SMS phone keys can wake up the device for 5 minutes In vibration mode, the Vibration of dormancy vibration can wake up the device to work for 5 minutes. NO If the vibration continues, the device will work continuously Electronic fence can be edited through the web page Electronic fence or APP. Warning messages will be sent when the device YES enters or exceeds the electronic fence Low battery alarm If the built-in battery is less than 3.7V, the device will report a low power alarm YES The device periodically Time to upload uploads location and other information at a set YES frequency.(Unit: second) 5 / Send the roll call message, /Call the roll the device from the sleep YES state into the working state, work for 5 minutes, upload location information When the device is sleeping, keep the network connected Dormancy online NO to ensure that the APP can send commands Dormancy offline When the device is sleeping, NO 8/16 YES NO YES YES YES YES YES F207 User manual sleep123456 shock LOW,1 ON /LOW, 0 OFF upload123456,3600 d123456 gprson123456,1 gprson123456,0 F207-UM-005,A/1 Skylab M&C Technology Co.,Ltd. close the network connection and app cannot send instructions To change the Example Change the NO domain name, IP domain name or IP address Language Modify the text reply NO settings language APN settings Example Set the APN of the NO device Factory reset Remote restart Parameter Query 1 Parameter Query 2 Query status Do Not Disturb Turn off do not disturb mode Step down the switch Weak vibration Restore the factory Settings YES of the device Restarting the device YES View software version number, device ID, domain name, APN, network signal, NO defense status, vibration sensitivity Check the main control number, SOS number, and NO defense parameters Check battery, network, GPS NO status, etc Set the do not disturb period, during which the device YES enters the flight mode Cancel the Do not Disturb function YES This feature is not currently implemented YES When the command is issued, the equipment will YES 9/16 YES YES YES YES YES YES YES YES NO NO NO NO F207 User manual szcs,123456,domain= a.zg666gps.com:7700 Lag1 (English) lag2(Chinese) apn123456, Access Point ; apn123456, Access Point, User name ; apn123456, Access Point, User name, Password format RST param1 param2 status F207-UM-005,A/1 Skylab M&C Technology Co.,Ltd. Moderate vibration Strong vibration Voice Finding indicator light Language play Upgrade instructions vibrate 10 times, and the vibration intensity is weak Send the command, the equipment will vibrate 10 times, vibration intensity Send the command, the equipment will vibrate 10 times, vibration intensity is strong When the command is issued, the device will beep for 10 consecutive seconds When the command is issued, the red light of the device blinks continuously The voice in the APP will be delivered to the device to play Check whether the software has a new version. If yes, the software is automatically upgraded YES YES YES YES YES NO NO NO NO NO NO YES F207 User manual CheckUpdate 10/16 F207-UM-005,A/1 Skylab M&C Technology Co.,Ltd. 7. Download phone APP F207 User manual 1. Android mobile phone: Scan above QR to download; 2. Ios: search"LKGPS2" in the app store or Google play store to download. 8. Log in by website and phone APP Type www.zg666gps.com/www.lkgps.net in the browser address bar, click the enter key. Select IMEI, enter 10 digits of device ID, and the default password is 123456. Click GO to log in. 8.1 Log in by Phone APP Please refer to the picture below 11/16 F207-UM-005,A/1 Skylab M&C Technology Co.,Ltd. F207 User manual Select "IMEI / ID login" for the first login, select "666" for the first column of address, input 10 digits on the device barcode, and the default password is 123456, Click "log in" to log in. After logging in, set up and improve the user information, you can use other login methods. Note: (1) The optional items in the address column of the first column: select "666" for domestic users and "lkgps" for foreign users; (2) Error "wrong user name or password" appears in the address bar, unable to log in normally. 12/16 F207-UM-005,A/1 Skylab M&C Technology Co.,Ltd. 8.2 App usage introduction F207 User manual The settings include: reminder settings (mobile phone sound and vibration settings), password modification, skin replacement, instructions for use (multi version instructions), log out of the current login. More settings include: command issuing (instruction 1, instruction 2, instruction 3, instruction 4, instruction 5, instruction 6, instruction 7, instruction 8, instruction 9) Electronic fence, equipment information (equipment name, equipment number, expiration time, equipment model, equipment SIM 13/16 F207-UM-005,A/1 Skylab M&C Technology Co.,Ltd. F207 User manual card number, type, gender, weight, age, birthday, owner name, owner phone number, icon), product description, equipment message. Instruction: instruction 1, instruction 2, instruction 3, instruction 4, instruction 5, instruction 6, instruction 7, instruction 8, instruction 9. Health: step counting, sleep Note: If you need to use a multi machine version of the advanced account, please contact the equipment manufacturer. You can use it after opening the exclusive account. The software operation interface is slightly different. 8.2.1 Dog training function Instruction set Operation interface Send command Long press rename instruction name Command setting(edit command name from APP) Default instruction name command function Vibration mode Command 1 Command 2 Weak vibration 0.5 s One Vibration for 0.5s Interval Vibration0.5s every time20times, for Weak vibration for 10s 10s Command 3 Command 4 Moderate vibration for One Vibration for 0.8s 0.8s Medium vibration for Interval vibration 0.8s every time 13 times for 0.8s 10s 14/16 F207-UM-005,A/1 Skylab M&C Technology Co.,Ltd. F207 User manual Command 5 Command 6 Strong vibration for 2s One Vibration for 2s Interval vibration For Interval Vibration, 1.25s every time 9 times for 10s 10s Command 7 Command 8 Command 9 "Ticking" for 0.5s "Ticking" for10s OnLight flashes One ticking for 0.5s Interval ticking0.5s every time20 times for 10s OffLight turns off 8.2.2How to use health Oversee interface 9. Faults & The solutions QStart up Fail? APlease fully charge the device before turning it on. QThe device can not obtain location information? APlease place the device in an open area for testing. There is no GPS signal in the room. QHow to choose SIM card? AThe SIM card must support LTE&GSM&GPRS network, please make sure the balance in the card is sufficient and there is enough traffic. Q: Whether the equipment can be used overseas? AOverseas customers need to set the APN before normal use. Edit the SHORT message APN123456 CMNET and send it to the SIM card of the device. Cmnet is the APN of the mainland carrier. 15/16 F207-UM-005,A/1 Skylab M&C Technology Co.,Ltd. F207 User manual 10. Cautions Please be sure to follow the instructions when using: 1.Keep the device in a dry environment. The internal circuit may be damaged in a damp environment. 2.Please do not place it in too hot or cold places.. 3.lease do not shake the equipment violently during use. 4.If soiled, clean up with a dry cloth. Do not use chemicals or cleaners. 5.Please do not paint the equipment, this may cause internal circuit failure. 6.Do not disassemble or disassemble equipment. 11. Contact information Skylab M&C Technology Co.,Ltd. Address: 6 Floor, No.9 Building, Lijincheng Scientific & Technical park, Gongye East Road, Longhua District, Shenzhen, Guangdong, China Phone: 86-75583408210Sales Support Phone: 86-75583408510Technical Support Fax: 86-755-83408560 E-mail: technicalsupport@skylab.com.cn Website: www.skylab.com.cnwww.skylabmodule.com 16/16 F207-UM-005,A/1