TOTOLINK LR350 4G LTE Router Quick Installation Guide

Indicators, Ports, and Buttons

1 Installation Diagram

Method 1: Wireless Connection to the Internet (with SIM card)

1. Insert the SIM card into the slot.
2. Power on the router.
3. Find the default Wi-Fi name (TOTOLINK_LR350) on your phone and choose to connect.
4. For security, create passwords for your router and Wi-Fi.

Note: Micro or Nano SIM cards must be used with a standard SIM card adapter.

Once connected, you can enjoy Wi-Fi.

Method 2: Wired Connection to the Internet (with Cable)

Connect the router to the Internet using an Ethernet cable. Connect your PCs to the LAN ports.

Default Wi-Fi Name: TOTOLINK_LR350

[Diagram showing router connections to power, internet cable, and PCs]

2 Configure the Router on Phone

Follow these steps to configure your router using a smartphone:

1. Activate the WLAN function on your phone and connect to TOTOLINK_LR350. Open a web browser and enter http://itotolink.net in the address bar. [Visual reference: P1]
2. Enter admin for the password and click LOGIN. [Visual reference: P2]
3. Click "Quick Setup" on this page to enter the setting interface. [Visual reference: P3]
4. Time Zone Setting: Select your correct Time Zone from the list and click Next. [Visual reference: P4]
5. Internet Setting: Choose a suitable connection type (Dynamic IP, Static IP, PPPoE) and fill in the required information. Click Next.
   • Dynamic IP: No information required. Confirm with your ISP if Dynamic IP is supported.
   • Static IP: Input the IP address, Subnet Mask, Default Gateway, and DNS from your ISP.
   • PPPoE: Input User Name and Password from your ISP.
   [Visual reference: P5/P6]
6. Wireless Setting: Create passwords for your 2.4G and 5G Wi-Fi networks. You can also revise the default Wi-Fi name. Click Next. [Visual reference: P7]
7. Change Password: Create a new Login Password for your router for security. Click Next. [Visual reference: P8]
8. Summary: Review the summary information for your settings. Remember your Wi-Fi Name and Password. Click Done. [Visual reference: P9]

The router will restart automatically to save the settings. Your phone will be disconnected. Reconnect your phone to the new Wi-Fi name and input the correct password. You can now enjoy Wi-Fi. [Visual reference: P10]

3 FAQs (Frequently Asked Questions)

1. Unable to open the router's login page on the browser?

   Please check if your phone has connected to the router and ensure you have entered the correct default gateway: http://itotolink.net.

2. After the SIM card is plugged in, the SYS LED is Red Blinking, and the Internet cannot be accessed.

   The SIM card may not be inserted properly. Power off the 4G router and re-insert the card. It is recommended to use a toothpick if the card slot is deep and fingernails are short. Alternatively, the SIM card might not be activated; ensure it is activated according to the card manual's instructions before inserting.

3. After the SIM card is plugged in, the SYS LED is Red light always on, and the Internet cannot be accessed.

   First, test the SIM card in a mobile phone to confirm it works normally. If it does, contact your 4G SIM card provider to check for available data traffic, verify real-name authentication, and ensure the card is not locked.

4. After using the card, the mobile phone connects to Wi-Fi, but the network speed is slow.

   This situation is related to the SIM card's signal strength. In areas with poor signal, Wi-Fi performance will be suboptimal. Try repositioning the router to a location with a stronger signal.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Manufacturer Information

Manufacturer: ZIONCOM ELECTRONICS (SHENZHEN) LTD.

Address: Room 702, Unit D, 4 Building Shenzhen Software Industry Base, Xuefu Road, Nanshan District, Shenzhen, Guangdong, China