Nextube Quick Start Guide

1. First-time Connection

A line drawing shows the Nextube device, which consists of five vertical tubes arranged horizontally on a base. A cable extends from the device, labeled 'Power'.

[Power Button]

2. Wi-Fi Configuration

Connect your computer/phone network to Nextube-AP Wi-Fi. The password for Nextube-AP Wi-Fi is: 12345678.

Connect to Network

Wi-Fi: Nextube-AP
Password: 12345678

Select Wi-Fi and enter the password in the config page. If the config page does not load automatically, enter the IP address 10.10.10.1 in your browser.

Select Wi-Fi Network

wi-fi 01
wi-fi 02
wi-fi 03
wi-fi 04

Enter Password

SSID: wi-fi 04
Password: 12345678

[Next Button] [Apply Button]

3. Download Nextube Software

Download the Nextube software from: download.rotrics.com

Available for Windows and Mac.

[Windows Icon] [Mac Icon]

4. Connect to Computer

A line drawing shows the Nextube device connected via a cable.

5. Start Using

A line drawing shows the Nextube device with its tubes illuminated.

Operation

For first-time use, ensure Nextube functions are configured in the software first.

Button Functions

Prev Button: Return to previous App or page.
Action Button: Confirm or increase number. Long press for 3 seconds to enter application menu.
Next Button: Skip to the next App or page.
Setting: Long press Prev and Next buttons simultaneously for 3 seconds to enter the setting menu.

Support and Information

Need a detailed product manual? Visit manual.rotrics.com.

We're here to help: support@rotrics.com

FCC Compliance

FCC Caution

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.