goobay Ultra High-Speed HDMI 2.1 Flexadapter 0.10m G+
Product Overview
This goobay Ultra High-Speed HDMI™ Flexadapter is designed for hard-to-reach connections, such as behind TVs. It extends existing HDMI™ cables for standard HDMI™ devices.
Key Features:
- Supports UHD up to 8K @ 60 Hz / 4K @ 120 Hz.
- Data transfer rate up to 48 Gbit/s.
- Includes support for HDR, ARC, HDCP, and 3D technologies.
- Features a premium, flexible textile cable with metal connectors and strain relief.
- Equipped with gold-plated connectors for enhanced corrosion protection and durability.
Technical Specifications
Connections:
- Connection 1 Type: HDMI™ connector male (Type A)
- Connection 2 Type: HDMI™ female (Type A)
- Housing Material: Aluminium
- Contact Material: Gold-plated
Cable:
- Cable Length: 0.1 m
- Type: Textile
- Cable Type: Round cable
Signal Transmission:
- Max. Resolution: 8K/60Hz (7680x4320) Full UHD
- Supported Video Standards: 4K/60Hz (3840x2160) UHD, 10K/30Hz Ultra HD, 4K/30Hz (3840x2160) UHD
- Supported Audio Standards: Enhanced Audio Return Channel (eARC), Audio Return Channel (ARC)
- Other Supported Standards: HDR (High Dynamic Range), HDMI™ Ethernet Channel (HEC), 3D, HDCP 2.2, Consumer Electronics Control (CEC)
- Max. Transmission Rate: 48 Gbit/s
General:
- Color: Black, Silver
- Compliance: CE mark [European Conformity symbol]
Diagrams and Pinout
Physical Layout Description:
The adapter features a male HDMI Type A connector on one end and a female HDMI Type A connector on the other. These connectors are attached to a flexible textile cable, approximately 0.1 meters in length. The goobay logo is visible on the adapter housing.
Wire Cross-Section Description:
The cable cross-section reveals a construction consisting of multiple wires (indicated as 7/0.060T strands) within a PVC and braid layer, totaling an outer diameter of approximately 4.8mm. Graphene shielding is also present for signal integrity.
Wiring Diagram (Pinout):
The wiring diagram details the pin assignments for the HDMI connectors. It lists pins 1 through 20, specifying signals such as TMDS Data (2+, 2, 1+, 1, 0+, 0), Clock (Data 2 Clock+, Data 2 Clock-), Hot Plug Detect (HPD), Control (CEC), Utility (SCL, SDA), Ground, and 5V Power. Color coding for some wires (green, blue, red, gold, silver) is indicated.
HDMI Pin Assignments:
| Pin | Signal | Color (Indicated) |
|---|---|---|
| 1 | TMDS Data2+ | Green |
| 2 | TMDS Data2 Shield | |
| 3 | TMDS Data2- | Green |
| 4 | TMDS Data1+ | Blue |
| 5 | TMDS Data1 Shield | |
| 6 | TMDS Data1- | Blue |
| 7 | TMDS Data0+ | Red |
| 8 | TMDS Data0 Shield | |
| 9 | TMDS Data0- | Red |
| 10 | TMDS Clock+ | Gold |
| 11 | TMDS Clock Shield | |
| 12 | TMDS Clock- | Gold |
| 13 | CEC (Consumer Electronics Control) | Silver |
| 14 | Utility (SCL) | Silver |
| 15 | Utility (SDA) | Silver |
| 16 | +5V Power | Silver |
| 17 | Ground | Silver |
| 18 | +5V Power | Silver |
| 19 | Ground | Silver |
| 20 | Hot Plug Detect (HPD) |
Revision History
The document includes a revision history table indicating changes made. The latest revision noted is dated 01.09.2025.
| Date | Name | Description |
|---|---|---|
| 01.09.2025 | fw | Adapter HDMI 2.1 Flexadapter 0,10m G+ |
| 01.09.2025 | fw | Drawing No.: 79145 |
| Subject to change |
