NETGEAR Privacy Policy | NETGEARNETGEAR Terms and Conditions | NETGEAR
Contact Us | Slingshot
User Manual for NETGEAR models including: RBK752, Wi-Fi 6 Router Tri-Band Mesh WiFi System, RBK752 Wi-Fi 6 Router Tri-Band Mesh WiFi System, 6 Router Tri-Band Mesh WiFi System, Tri-Band Mesh WiFi System, Mesh WiFi System, WiFi System
Orbi RBR350 | WiFi System | NETGEAR Support
File Info : application/pdf, 2 Pages, 54.45KB
DocumentDocumentWelcome to your new Orbi Wi-Fi 6 router What's in the box? 1x NETGEAR Orbi Wi-Fi 6 router 1x Power adapter 1x Ethernet cable 1 Download the Orbi app 2 Connect your Orbi router ONT LAN TEL 1. Connect the Ethernet cable to your Orbi's Internet port, then connect the other end to the port labelled LAN1 or GE1 on your Optical Network Terminal that's the fibre box usually found on your wall. 2. Connect the power adapter and turn your Orbi on at the wall. Got extra Orbi satellites? Find a place to plug them in now, or you can set them up later. Orbi satellites must be within range of your Orbi router's Wi-Fi signal, so don't place them too far apart from each other. If you have a landline, connect it to the port labelled POTS or TEL on your Optical Network Terminal. 3 Connect to your Orbi Wi-Fi network 1. Go to the Wi-Fi settings on your mobile device. 2. Connect to your Orbi Wi-Fi network. You'll find the Wi-Fi network name and password printed on the front of your Orbi router. It may take a few minutes for your network to appear after plugging in your Orbi. 4 Open the Orbi app and follow the setup instructions Important: Skip the steps instructing you to disconnect and reconnect your ISP modem. These steps don't apply just select `Continue'. That's it, your Orbi router is up and running! For NETGEAR's Privacy Policy, visit www.netgear.com/about/privacy-policy. By using this device, you are agreeing to NETGEAR's Terms and Conditions at www.netgear.com/about/terms-and-conditions. If you do not agree, contact Slingshot at www.slingshot.co.nz/contact to return your device.