User Guide for Voyager models including: Voyager, Blind, Spot, Detection, System, VBSD1

ASA使用说明书

MG

尺寸：160*210mm 材质：128g铜版纸

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • Text

File Info : application/pdf, 1 Pages, 1.09MB

18

1

2

When the car get into tunnels or other places where satellite signals can not be received, the speed limited function for BSD will not work

160*210mm 128g



WARNING
Please check the surroundings before change lane:This system just help you to check the vehicle behind you when you change lane. Because of the operation limits, the system will not warning or LED may delay to flash when the car beside you. Pleas always check surroundings for safety

1.The system can't detect the target under below condition: The vehicle is behind the adjacent lane which not approach The speed of the vehicle is the same as yours, and keep this driving speed for some time. Counter flow The Adjacent lanes of the vehicle wants to speed up, And it's beside you. Not behind. The Adjacent lanes is too wide to detect. Our range was set up according to the standard high way.
2.The system will not trigger the BSD warning or delay to warning you:
The vehicle change the lane( from third lane to Second lane ,or other) When it drives On the steep slope Through the fop of the hills or mountain In a sharp turn at the intersection When there is height distance between driving lane and Adjacent lanes 3.If the road too narrow, it may detect the two lanes:
4.The warning LED of BSD will light by some motionless object(such as :guardrail/Concrete-Wall,tunnel,greenbelts )

Guardrail/Concrete-Wall

Guardrail/Walls become Narrow

From the auxiliary road to the main road

Tunnel Exit or Entrance

U-Turn

Turning on

the Greenbelts,

and it's become From the the main road to

narrow and

the auxiliary road

narrow.