GT Band Operation Manual

1. Know the Device

The device features:

• [Touch key]
• [HR LED]
• [USB port]

Functions of the Touch key:

• Click the Touch key to:
  • Return; or
  • Turn on the screen

2. Power On/Off

Note: The device must be activated through charging before the first use.

Steps:

• Pull the strap and remove the main body of the device.
• Insert the metal charging terminal of the main body into the USB port to charge the device (use specified voltage and current: 5V/500mA; be careful not to reverse polarity).

Charging and Power-on

Power Off: Shutdown path: [Setup] → [Power Off].

1. Download the APP

Scan the QR code (QR codes are excluded from this HTML) to download "VeryFit" or search for and download "VeryFit" in "APP Store" on your phone.

2. Pairing

Turn on the APP and Bluetooth. Search and select the device in the APP. Finally, bind the device in the APP.

Swipe the screen up/down

• To switch among pages at the same level; or
• To view long text or details.

Swipe the screen left/right

• To switch among pages at the same level.

Tap the screen

• To go to the sub-page;
• To complete the corresponding action, depending on which on-screen button is clicked.

Click and hold the screen

• To change the watch face wallpaper.

Screen

The GT Band supports 5ATM water resistance, full-screen touch, follow-hand operations, 14 sports modes, multiple cloud-based watch faces, and monitoring of Heart Rate (HR), SpO2, stress, and sleep. For operating instructions and FAQ, please start the APP and consult the User Guide.