User Manual for FOREVER models including: Laser Tattoo Paper 2 Paper System, Tattoo Paper 2 Paper System, 2 Paper System
Product Instructions
Produktanweisungen – HeatPressNation
File Info : application/pdf, 1 Pages, 297.25KB
DocumentDocumentwww.HeatPressNation.com support@heatpressnation.com PHONE: 1-800-215-0894 LASER TATTOO PAPER FOR SKIN AND FLAT SURFACES 2-PAPER-SYSTEM PRINT SETTINGS · Image Mode: mirrored · Media Setting: Multi-Purpose-Tray, 175g paper or heavier ONLY FOR LASER PRINTERS PREPARATION · Hold the paper at a slight angle in the light to recognize the coated side. Print your design in mirror image mode onto the coated side of the A-Paper. · Use a white toner printer if you want to transfer on dark skin or dark surfaces or, if you want to use white color in the design. A-PAPER The printable side of the A-Paper is semi-matt. The non-printable side is printed with our FOREVER-Logo. B-PAPER GLUE The B-Paper has a matt and glossy side. The matt side is the backing paper and it will be disposed of after peeling it off from the foil. 1 2 3 B-PAPER B-PAPER B-PAPER Peel off a corner of the white backing paper from the B-Paper and fold it over. A-PAPER A-PAPER Place the A-Paper face up on a flat surface. Now stick the exposed piece precisely on the corner of the A-Paper. 4 5 6 7 B-PAPER A-PAPER Use a squeegee, ruler or something similar and push the B-Paper backing paper away by rubbing over the B-Paper. Now the glue is applied and the tattoo paper is ready for transfer. TRANSFER · Cut around the design as exact as possible, you can use a scissor or most cutters/plotters. · Peel off the glossy foil. · Position the tattoo face down on clean and dry skin. · Soak the Tattoo with a damped sponge until wet throughly. Apply light pressure to the tattoo. · It is ready to be peeled off, when it can be slided away without using much force. NOTE · The tattoo has a high adhesive effect. Depending on the design and its size as well as where the tattoo is placed, the dura- bility is about 2-4 days. · If you wish to remove your tattoo earlier, you can simply use sticky tape / scotch tape or use skin oils and rub it off. · If you like a more matte looking appearance, you can rub sun crème / Sun Screen carefully over your new tattoo. 10.2019