RC Remote Control User Manual
Safety Instructions
To prevent any damage to your product or the safety of its users, please read the following safety precautions thoroughly before use and keep the information in this manual safe so that all users of this product can access it at any time.
1. Product Structure
A diagram shows a remote control device. The top surface features a circular button labeled 'Wireless control'. An arrow points to this button, identified as the 'Shooting button: Wireless remote control shooting button'. Below the main body, a compartment is labeled 'Battery Compartment: Assembling batteries'.
2. Key Functions
Shooting button:
After installing a fully charged battery, the remote control can enter working mode and sleep to save power. Press the shooting button to take photos wirelessly (it needs to be paired with our wireless camera handle).
3. Product Size
Unit: mm Tolerance: ±1.0mm L=33 W=6.8 H=80
Diagrams show the dimensions of the remote control. One view shows a length of 33mm and a width of 6.8mm. Another view shows a height of 80mm.
4. Technical Specifications
| Serial Number | Item | Specifications |
|---|---|---|
| 1 | Scope of application | This product is suitable for all SLR camera handles in our RC series |
| 2 | Input voltage | 3V |
| 3 | Battery type | One CR2032 button battery |
| 4 | Control mode | 2.4G Wireless remote control (only effective for our RC series controllers) |
| 5 | Control function | Take picture |
| 6 | Radio frequency | 2432MHz |
| 7 | Power | 0dBm |
| 8 | Remote control distance | About 40 meters (open area) |
| 9 | Body material | Plastic cement |
| 10 | Net weight | 15.8g |
| 11 | Ambient Temperature | 0℃-40℃ |
| 12 | Storage temperature | -10℃-50℃ |
| 13 | Relative temperature | 20%-90% |
5. Matters Needing Attention
- Please use the battery specified in the product specifications, otherwise it may cause the product to not turn on or be damaged.
- This product does not have waterproof function.
- The product belongs to precision instruments, please do not let it fall to the ground, be hit or strongly impacted.
- When the remote control is not sensitive or malfunctioning, please try replacing the battery.
• Specifications and design are subject to change without notice.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
