Draper Tools Official Website | Hand Tools, Power Tools and Accessories
Instruction Manual for DRAPER models including: 28369 Inline Water Trap and Filter, 28369, Inline Water Trap and Filter, Water Trap and Filter, Trap and Filter, Filter
Pcl , Durite, Power tools, Hand tools, Garage Tools and Consumables, Sealey tools ,Draper Tools ,Laser tools, Delta , Geodore | Workshopping.co.uk
Draper 28369 Inline Water Trap and Filter
File Info : application/pdf, 2 Pages, 151.82KB
DocumentDocumentEN Original Instructions Version 1 June 2022 INLINE WATER TRAP AND FILTER Stock No. 28369 Part No. DAT-IWTF Read this manual in full before attempting to use this product and retain it for later use. Always use the latest version of the manual. 1. Scope This inline water trap and filter is designed to catch water and other impurities in compressed air systems and can be installed directly onto the tool inlet or elsewhere in the air line. Part of our core range, this product is suitable for regular use by enthusiasts and tradespersons alike. WARNING! This product is not a toy and must be respected. 2. Specification Stock No. Part No. Rated pressure Max. pressure Thread size Weight 28369 DAT-IWTF 8bar (115psi) 10bar (145bar) 1/4" BSP 0.09kg 3. Health and Safety Information Important: Read all the Health and Safety instructions before attempting to operate, maintain or repair this product. Non-compliance with these instructions may result in injury or damage to the user, the product or the vehicle to be lifted. 3.1 General Health and Safety Precautions ·Observe all standard safety precautions and good practices when working with air tools. ·Before every use, inspect the tools for missing, broken, loose or corroded parts. Important: DO NOT use this product if it is damaged in any way. Contact Draper Tools to discuss repair and replacement options. ·Ensure that all accessories and attachments are securely tightened before use. ·Use the product only in the manner instructed in this manual. ·DO NOT modify this product in any way. ·ONLY use spare parts supplied by Draper Tools. 3.2 Additional Safety Instructions for Air Tools ·Compressed air can cause severe injury. -ALWAYS turn off and disconnect the air supply before leaving the product unattended. -Ensure that compressed air is not blocked by or in contact with any part of your body. ·ONLY use clean, dry and regulated compressed air. WARNING! NEVER use oxygen, combustible gases or other bottled gasses as a supply for this product. Use of these substances may cause the product to explode. ·Ensure that the product is compatible with the air supply before use. ·Ensure all connections are securely tightened. ·DO NOT exceed the maximum stated air pressure. 4. Product Overview Carefully remove the product from the (3) packaging and examine it for any signs of damage that may have occurred during shipment. (1) (1) Filter (2) Inlet (4) (3) Outlet (2) (4) Valve Please visit drapertools.com for our full range of accessories and consumables. 5. Operation Important: Before using this product, read and understand all the safety instructions listed in this manual. 1. Wrap a length of PTFE tape around the air line inlet of the air tool or other air line component to which the product will be connected. Important: For a more secure seal, the PTFE tape should be wrapped in the opposite direction to the thread. 2. Screw the water trap outlet (3) onto the air tool or other connecting inlet. 3. Wrap a length of PTFE tape around the inlet of the water trap inlet (2) and attach the desired coupling. 4. Connect the inlet to the air line. After use, hold the product upright and press the valve (4) to release any water from the reservoir. 6. Maintenance and Disposal Important: Always disconnect the product from the air line before attempting to maintain the product. ·Drain the reservoir weekly and before storing. ·Replace the water trap if it no longer creates an airtight seal or becomes visibly dirty on the inside. ·Store the product in a clean and dry environment, out of reach of children. ·DO NOT allow dirt, dust and other debris to enter the product. At the end of its working life, or when it can no longer be repaired, dispose of the product according to local regulations. 7. Explanation of Symbols Read the instruction manual Warning! 1/4" Thread size BSP Maximum pressure Operating pressure Contact your local authority for details of collection schemes in your area. Copyright © Draper Tools Limited Helpline: +44 (0) 23 8049 4344 Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 Website: drapertools.com Email: sales@drapertools.com Draper Tools Limited, Hursley Road, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF, UK