Instructions for Leica models including: 40129, APO-Televid 65 65mm Spotting Scope Body Angled, APO-Televid 82 82mm Spotting Scope Body Angled
Leica APO-Televid 82 Spotting Scope 40121 B&H Photo Video
File Info : application/pdf, 13 Pages, 137.86KB
DocumentDocumentAPO-TELEVID 65/82 ANLEITUNG | INSTRUCTIONS NOTICE D'UTILISATION | GEBRUIKSAANWIJZING ISTRUZIONI | INSTRUCCIONES EN FOREWORD TABLE OF CONTENTS We wish you a great deal of pleasure and success using Designation of parts.................................................. 13 your new Leica Apo-Televid. In order to make best use Attaching / Removing the eyepiece .......................... 13 of all the opportunities offered by this high performance Use with and without glasses .................................... 14 spotting scope, we recommend that you read these Focusing................................................................... 14 instructions first. Extendable lens hood ................................................ 15 Tripod mounting........................................................ 15 Interchangeable eyepieces........................................ 16 Accessories .............................................................. 18 Spare parts ............................................................... 19 Troubleshooting ........................................................ 20 Maintenance and cleaning ........................................ 21 Technical data .......................................................... 22 Leica Service Adresses ............................................. 23 Designation of parts.................................................. 23 WARNING! As with any optical viewing instrument, avoid looking directly at bright sources of light when using your Apo-Televid, to prevent eye injury. 12 DESIGNATION OF PARTS 1. Eyepiece with a.Rotating eyepiece cup b.Index for attaching c. Bayonet 2. Bayonet with a.Index for attaching b.Locking catch c.Thread for photo adapter 3. Eyepiece release button 4. Dual focusing roller for a.Rough focusing b.Fine adjustment 5. Tripod plate with a. Rotating collar b. Fixing screw c. 1/4" thread 6. Extendable lens hood with a. Sight 7. Lens EN ATTACHING / REMOVING THE EYEPIECE A Leica Apo-Televid consists of the spotting scope body and an eyepiece. To attach one of these eyepieces to the spotting scope, the red mark (1b) on the bayonet side of the eyepiece must first be aligned opposite the point (2a) on the spotting scope bayonet (2). In this position, the eyepiece is then inserted straight and pressed down. A short turn to the right (clockwise) lets the eyepiece engage and lock. To remove it, press the release button (3) on the underside of the spotting scope body. The eyepiece can then be turned to the left (anticlockwise) and pulled straight out. 13 EN USE WITH AND WITHOUT GLASSES Users who do not wear glasses should turn (see below) the eyepiece cup to the left (anticlockwise) until it clicks into place. This position secures the correct distance between eyepiece and eye and prevents annoying stray light. The click-stop provides the eye with a steady rest and thus avoids blurring. When viewing with glasses, the eyepiece cup should remain screwed in, so that the entire field of view is visible. FOCUSING The dual focusing roller of the Leica Apo-Televid models is equipped with two different ratios. The rear section of the focusing roller (in viewing direction, 4b) is used for rough or presetting; the front, narrower section (4a) is used for fine adjustment. This ensures fast, precise focusing at both low and high magnifications. Note: The rear focusing roller can only be turned between its two stops. Unlike this, the front roller is equipped with a friction clutch, allowing it to be turned beyond its stops. This is a matter of design, it neither impairs focusing in any way, nor does it cause any damage. 14 EN EXTENDABLE LENS HOOD The built in lens hood (5) should always be pulled out during viewing. If provides effective protection against side light (stray light), mechanical damage and soiling of the front lens by rainwater, fingerprints etc. TRIPOD MOUNTING Due the high magnifications achieved with any eyepiece, the use of a sturdy tripod is often indispensable. For this reason, the Leica Apo-Televid models are equipped with an especially large support with a 1/4" tripod thread (5c). To increase the possible applications of the models with angled view, the tripod support can be rotated by 360°, engages at 45° intervals, and can be locked in any desired position using the clamping screw (5b). 15 EN INTERCHANGEABLE EYEPIECES Notes: All eyepieces are supplied with case, bayonet cap, and protective front cap. These eyepieces cannot be used on the earlier Leica Televid/APO-Televid 62 and 77 models. The earlier eyepiece models for the earlier Leica Televid/ APO-Televid 62 and 77 models cannot be used on the current Leica Televid 65 and 82 models. VARIO EYEPIECE 25-50X WW ASPH. Zoom eyepiece with continuously adjustable magnification, very large field of view and outstanding optical performance. Suitable for universal application in all areas of nature viewing. With integrated rotating eyepiece cup. Order no. 41021 16 TECHNICAL DATA FOR THE EYEPIECE EN Eyepiece 25-50x WW Magnification 25-50x Objective field of view [in m/1000m] [in degrees] 40-26 / 2.3-1.5° Exit pupil diameter 3.28-1.64 mm Focal length 17.6-8.8 mm Diameter (approx.) 57 mm Length (approx.) [with the eyepiece cups turned in] 90 mm Weight (approx.) 380 g 17 EN ACCESSORIES Note: The Digital Adapter 3 can also be used with some of the respective eyepieces on the previous Leica Televid-/ Apo-Televid 62 und 77 models. Usable: DIGITAL ADAPTER 3 The LEICA Digital Adapter 3 (order no. 42 304) allows the Leica Apo-Televid 65 and 82 spotting scopes to be used with many of the Leica digital compact cameras (and other models with similarly dimensioned lens barrels). The combination allows high-quality digital photographs to be taken of even very distant objects. For instance, the combination with the 25-50x eyepiece gives a telephoto lens focal length of approx. 1250 to 2500 mm (equivalent to a 50 mm lens with the 35 mm format). For details and for further information on the Leica digital cameras that can be used, please contact your specialist Leica dealer or our Leica information service (see page 23 for the address). Not usable: 20x WW 20x WW 32x WW 32x WW 20-60x 20-60x 40x 40x WW 20-60x Order No. (41 002) (41 009) (41 004) (41 011) (41 001) (41 005) (41 003) (41 007) (41 012) 18 FILTERS EN To protect the front lens particularly from severe environmental influences (such as salt water) it makes sense to use an E 67 / E 82 screw in filter. Standard, colorless UVa filters are recommended. EVERY READY CASES The ever ready cases available as accessories provide protection against dirt and bumps. Their special design allows the respective Leica Apo-Televid 65 or 82 models to be used without taking them out of the case. Order no. For LEICA APO-TELEVID 65 with angular sight .... 42 311 For LEICA APO-TELEVID 65 with straight sight.... 42 312 For LEICA APO-TELEVID 82 with angular sight .... 42 313 For LEICA APO-TELEVID 82 with straight sight.... 42 314 SPARE PARTS Order no. Front cap (for both Apo-Televid 65 models)........434-621.106-000 Front cap (for both Apo-Televid 82 models)........434-821.106-000 Rear (bayonet) cap (for all Apo-Televid models).................. 434-821.001-030 Bayonet cap for Apo-Televid 65/ 82 eyepieces......................................... 434-829.000-015 Front cap for Apo-Televid 65/ 82 eyepieces......................................... 434-829.000-014 19 EN TROUBLESHOOTING Problem Operating error Remedy/explanation A circular image with no - The viewer's pupil is not at the - Correct the position of the vignetting cannot be obtained. exit pupil of the eyepiece, i.e. not on the axis and/or not head, the eyes, or the spotting scope. at the correct distance. - The position of the eyepiece cup does not match that for correct use with and without glasses. without glasses: rotate the eyepiece cup out - Correct the adjustment: Wearer of glasses rotate the eyepiece cup in; for use 20 MAINTENANCE / CLEANING EN Special maintenance is not necessary. However, to maintain performance over many years, the optical system should always be carefully cleaned. Coarse dirt particles, such as sand, should be removed with a fine hair brush or blown away. Marks such as fingerprints on the front lens and eyepiece lenses can be cleaned with a damp cloth and then wiped off with a soft, clean leather or dust-free cloth. Special cleaning cloths, as used for glasses, are not recommended. They are impregnated with chemicals that can damage optical glass and its coatings (the glass used to make glasses has a different composition from the types of glass used in spotting scopes). Alcohol and other chemical solutions must not be used to clean the housing. If necessary, wipe with a soft, dry cloth. For excessive soiling, your Apo-Televid can be cleaned simply by rinsing it under running water. Saltwater can be rinsed off in the same way. Note: To protect the front lens particularly from severe environmental influences (such as salt water) it makes sense to use an E 67 / E 82 screw in filter. 21 EN TECHNICAL DATA Optical system Lens diameter Coating Prism system Housing Water resistance Focal length Close range limit (approx.) Overstroke above Operating temperature in °C Storage temperature in °C Model Length (approx.) Height (approx.) Width (approx.) Weight (approx.) LEICA APO-TELEVID 65 LEICA APO-TELEVID 82 uncemented 4 lens element apochromatic system, special fluorite glass lens elements with anomalous partial dispersion 65 mm 82 mm multiple layer and AquaDuraTM hard coated outer lens element surfaces Schmidt-Pechan prism (straight sight) / Schmidt prism (angular sight) Magnesium, shock-resistant up to 100g up to 5m to DIN standards, nitrogen-filled 440 mm 3.5 m -5 dpt -25 to +55° -40 to +85° Straight sight Angular sight Straight sight Angular sight 304 mm 295 mm 304 mm 295 mm 93 mm 100 mm 93 mm 100 mm 87 mm 87 mm 87 mm 87 mm 990 g 1070 g 910 g 980 g 22 LEICA PRODUCT SUPPORT LEICA CUSTOMER CARE EN The Leica information service can provide you with an answer to any technical application questions relating to the Leica range either in writing, on the telephone or by e-mail. Leica Camera AG Product Support / Software Support Am Leitz-Park 5 D-35578 Wetzlar Tel.: +49(0)6441-2080-111 /-108 Fax: +49(0)6441-2080-490 info@leica-camera.com / software-support@leica-camera.com For servicing your Leica equipment or in the event of damage, the Leica Camera AG Customer Care department or the repair service provided by authorized Leica agents in your country are available (see the warranty card for a list of addresses). Leica Camera AG Customer Care Am Leitz-Park 5 D-35578 Wetzlar Tel.: +49(0)6441-2080-189 Fax: +49(0)6441-2080-339 customer.care@leica-camera.com 23PDFium PDFium