ℹ️ Document Conversion Notice: This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.

Mackie Thump12A/Thump15A Powered Loudspeakers Owner's Manual

Mackie Thump12A and Thump15A Powered Loudspeakers

Owner's Manual

Introduction

Welcome to the Mackie Thump Series of powered loudspeakers. The Thump12A and Thump15A models deliver powerful sound with 1300W of peak power and Mackie's signature Dynamic Bass Response™ technology, ensuring deep, punchy lows and clear highs. These loudspeakers are designed for a wide range of applications, from live sound reinforcement to DJ sets and stage monitoring.

This manual provides essential information for setting up, operating, and maintaining your Thump loudspeakers.

Support and Contact Information

For support and inquiries in Japan, please contact Mackie's authorized distributor:

Phone: 04-2944-3811, 04-2944-3812
Email: support_mackie@otk.co.jp
Hours: 9:00 AM - 5:30 PM JST (Monday - Friday)

Sales Email: sales_mackie@otk.co.jp

Website: mackie-jp.com/support

Additional regional support numbers are available for various prefectures in Japan.

Key Features

1300W Peak Power: High output for demanding applications.
Dynamic Bass Response™: Provides deep, consistent bass at any volume level.
Wide-Z™ Input: Accepts mic and line-level signals with high impedance capability.
Built-in DSP: Offers optimized speaker modes for different scenarios.
Durable Construction: Road-ready design for reliable performance.
Integrated Pole Mount: For easy speaker placement.
Multiple Speaker Modes: Tailor the sound for Music, DJ, Live, or Monitor applications.
PFC (Power Factor Correction): Ensures efficient and stable power delivery.

Controls and Connections

Front Panel

The front panel primarily features the loudspeaker driver and a status LED.

MAIN LED: Indicates the speaker is powered on. Can be toggled off.
LIMIT LED: Illuminates when the internal limiter is engaged, protecting the speaker from clipping.

Rear Panel Controls and Inputs

The rear panel houses all user-adjustable controls and input/output connectors.

INPUT (XLR / 1/4" TRS Combo Jack):
- Accepts balanced XLR or unbalanced/balanced 1/4" TRS connections.
- The Wide-Z™ input handles mic and line-level signals.
- XLR Pinout: Pin 1 = Shield, Pin 2 = +, Pin 3 = -.
- 1/4" TRS Pinout: Tip = Hot (+), Ring = Cold (-), Sleeve = Shield.
- 1/4" TS (Mono) Pinout: Tip = Signal, Sleeve = Ground.
MIX OUT (XLR Connector):
- Outputs the processed input signal, useful for daisy-chaining to other loudspeakers or subwoofers.
- XLR Pinout: Pin 1 = Shield, Pin 2 = +, Pin 3 = -.
GAIN Control:
- Adjusts the input signal level. Ranges from -∞ (Off) to +35 dB.
- A central detent (around 12 o'clock) is often a good starting point for line-level sources.
SPEAKER MODE Selector:
- Selects the optimal equalization and crossover settings for your application. Options include:
  - MUSIC: Flat response for general music playback.
  - DJ: Enhanced low-end for DJ sets.
  - LIVE: Mid-range presence for live vocals and instruments.
  - MON (Monitor): Optimized for use as a stage monitor, with a crossover at 2 kHz.
  - SUB: Designed to complement a Thump18S subwoofer, with a high-pass filter.
MAIN LED ON/OFF Switch: Toggles the front panel MAIN LED.
LIMIT LED: Indicates when the internal limiter is active.
AC POWER INPUT: Standard IEC connector for the power cord.
POWER Switch: Rocker switch to turn the loudspeaker on or off.

Speaker Mode Details

The SPEAKER MODE control tailors the loudspeaker's frequency response and crossover points for specific applications:

MUSIC: Provides a balanced, flat frequency response suitable for general music playback.
DJ: Boosts low frequencies to add punch and impact for DJ performances.
LIVE: Enhances mid-range frequencies for clarity and presence of vocals and instruments in live sound reinforcement.
MON (Monitor): Sets a crossover frequency at 2 kHz, making it ideal for use as a stage monitor.
SUB: Engages a high-pass filter (e.g., 80 Hz for Thump12A, 100 Hz for Thump15A) to work seamlessly with a dedicated subwoofer like the Thump18S.

System Examples

The Thump Series loudspeakers are versatile and can be integrated into various audio systems.

Basic PA System

A simple setup for small events or presentations.

Connect a microphone or audio source to a mixer (e.g., Mackie ProFX8v2).
Connect the mixer's main outputs (L/R) to the LINE inputs of the Thump12A or Thump15A.

Diagram shows: Microphone -> Mixer -> Thump12A (LINE IN).

Small Club System

A setup suitable for small venues, including a subwoofer.

Connect a mixer (e.g., Mackie ProFX8v2) to the inputs of two Thump12A loudspeakers (one for L, one for R).
Connect the MIX OUT XLR from each Thump12A to the input of a Thump18S subwoofer.
Alternatively, connect the mixer's L/R outputs to the Thump12A inputs and use the MIX OUT of the Thump12A to feed the Thump18S.

Diagram shows: Mixer L/R Outs -> Thump12A (LINE IN). Thump12A MIX OUT -> Thump18S Input.

DJ System

A setup for DJs using a DJ mixer or controller.

Connect the main outputs of a DJ mixer (e.g., Mackie Big Knob Studio+) to the inputs of two Thump15A loudspeakers.
For extended low-frequency response, connect the MIX OUT of the Thump15A to the input of a Thump18S subwoofer.

Diagram shows: DJ Mixer L/R Outs -> Thump15A (LINE IN). Thump15A MIX OUT -> Thump18S Input.

Daisy-Chaining Multiple Thump Loudspeakers

Connect multiple Thump loudspeakers in series for wider coverage or distributed sound.

Connect the main output of your mixer to the input of the first Thump loudspeaker.
Connect the MIX OUT XLR of the first Thump loudspeaker to the input of the second Thump loudspeaker.
Continue this chain for additional loudspeakers.

Diagram shows: Mixer Main Outs -> Thump MIX OUT (XLR) -> Next Thump Input.

Large Club System

A more complex setup for larger venues, including monitors.

Connect a digital mixer (e.g., Mackie DL1608) L/R outputs to the inputs of two Thump15A loudspeakers.
Use the MIX OUT of the Thump15A loudspeakers to feed a Thump18S subwoofer.
Use auxiliary outputs from the mixer (AUX 1/AUX 2) to feed two Thump12A loudspeakers configured as stage monitors.

Diagram shows: Mixer L/R Outs -> Thump15A (LINE IN). Thump15A MIX OUT -> Thump18S Input. Mixer Aux Outs -> Thump12A (LINE IN) as Monitors.

Specifications

Detailed specifications for the Mackie Thump12A and Thump15A powered loudspeakers.

Feature	Thump12A	Thump15A
Frequency Response (-3 dB)	57 Hz - 20 kHz	39 Hz - 20 kHz
Frequency Response (-10 dB)	50 Hz - 23 kHz	32 Hz - 23 kHz
Max SPL (1m)	126 dB	127 dB
Dispersion (H x V)	90° x 60°	90° x 60°
Woofer	12 in / 305 mm	15 in / 381 mm
Compression Driver	1.4 in / 36 mm	1.4 in / 36 mm
Crossover Frequency	2.4 kHz (Active, 24 dB/octave)
Power Amplifier	1300W Peak, Class D (LF), Class AB (HF)
Input Sensitivity	-35 dBu (Main - Max / Channel - Max) to +18 dBu (Main - Max / Channel - 9:00)	-35 dBu (Main - Max / Channel - Max) to +18 dBu (Main - Max / Channel - 9:00)
Input Connectors	XLR / 1/4" TRS Combo, 1/4" TS (Hi-Z)
Input Impedance	XLR: 600 Ω, 1/4": 8 kΩ (Line), 1 MΩ (Hi-Z)
AC Power Requirements	100-240 VAC, 50-60 Hz, 75W
AC Connector	3-Pin IEC 250 VAC, 10 A
Dimensions (H x W x D)	24.2 in / 615 mm x 14.1 in / 358 mm x 14.0 in / 356 mm	27.0 in / 686 mm x 17.4 in / 442 mm x 14.0 in / 356 mm
Weight	13.2 kg (29.1 lb)	15.8 kg (34.8 lb)
Operating Temperature	0 - 40°C (32 - 104°F)

Dimensions and Weight

Physical dimensions and weight for each model:

Thump12A: Height: 24.2 in (615 mm), Width: 14.1 in (358 mm), Depth: 14.0 in (356 mm), Weight: 29.1 lb (13.2 kg)
Thump15A: Height: 27.0 in (686 mm), Width: 17.4 in (442 mm), Depth: 14.0 in (356 mm), Weight: 34.8 lb (15.8 kg)

Optional Accessories

Mackie offers several accessories to enhance the usability of your Thump loudspeakers:

Thump12A Speaker Bag (P/N 2047360-09)
Thump12A Rolling Speaker Bag (P/N 2047360-10)
Thump15A Speaker Bag (P/N 2047360-11)
Thump15A Rolling Speaker Bag (P/N 2047360-12)
SPM200 Loudspeaker Pole Mount (P/N 2035170-01)

Frequency Response Charts

The following charts illustrate the frequency response of the Thump12A and Thump15A loudspeakers across different speaker modes. These graphs plot decibel (dB) level against frequency (Hz) on a logarithmic scale, showing how the speaker's output varies with frequency in each mode.

Thump12A Frequency Response

Graphs display response curves for MUSIC, DJ, LIVE, and MONITOR modes.

Thump15A Frequency Response

Graphs display response curves for MUSIC, DJ, LIVE, and MONITOR modes.

User Controls Diagram

The rear panel of the Thump12A/Thump15A features the following controls:

SPEAKER MODE: Selects equalization and crossover settings (MUSIC, LIVE, MON, SUB).
MAIN LED ON/OFF: Toggles the front panel MAIN LED.
LIMIT LED: Indicates when the internal limiter is engaged.
GAIN: Adjusts input signal level.
INPUT: XLR and 1/4" TRS combo jack.
MIX OUT: XLR output for daisy-chaining.
AC POWER INPUT: IEC connector.
POWER: Rocker switch for on/off.

Diagram shows the layout of these controls on the rear panel.

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 24 Pages, 5.40MB

Thump12A Thump15A Manual JP Adobe PDF Library 15.0 Adobe InDesign CC 2017 (Windows)

Related Documents

	Mackie M-800 High-Current Power Amplifier - Specifications and Features Explore the Mackie M-800, a powerful dual-channel high-current power amplifier featuring Fast Recovery circuitry, T-Design cooling, and versatile connectivity for professional audio applications. Includes detailed specifications and features.
	Mackie C300z 2-Way Speaker User Manual Comprehensive user manual for the Mackie C300z 2-way portable loudspeaker, covering setup, connections, positioning, safety, technical specifications, and warranty.
	Mackie THUMP212XT & THUMP215XT 1400W Powered Loudspeakers Quick Start Guide Get started with Mackie's THUMP212XT and THUMP215XT 1400W Powered Loudspeakers. This guide covers essential safety, setup, and technical details for optimal audio performance.
	Mackie C300z Two-Way Active Speaker System User Manual Comprehensive user manual and technical specifications for the Mackie C300z two-way active loudspeaker system. Covers safety instructions, setup, connection diagrams, placement advice, protection features, maintenance, troubleshooting, and warranty information.
	Mackie SRM150 Compact Active PA System User Manual \| Setup, Operation & Specs Download the Mackie SRM150 Compact Active PA System user manual. Get detailed information on setup, operation, front/rear panel controls, connections, troubleshooting, specifications, and warranty.
	Mackie M-1400/M-1400i High-Current Power Amplifier: Features, Specs, and Applications Comprehensive details on the Mackie M-1400/M-1400i high-current power amplifier, covering its advanced features like Fast Recovery circuitry and Constant Directivity EQ, detailed technical specifications, diverse applications, and front/rear panel layouts.
	Mackie ProFXv3+ Series Analog Mixers: Enhanced FX, USB, Bluetooth Explore the Mackie ProFXv3+ Series, professional analog mixers featuring enhanced GigFX+ effects, a 24-Bit/192kHz USB-C audio interface, and bi-directional Bluetooth. Ideal for studio recording, live sound, and streaming, these mixers offer award-winning Onyx preamps and intuitive controls.
	Mackie Big Knob Studio & Studio+ Monitor Controller Owner's Manual This manual provides comprehensive instructions and specifications for the Mackie Big Knob Studio and Big Knob Studio+ monitor controllers and interfaces. It covers setup, operation, features, troubleshooting, and technical details.