Operation Manual
Preface
In order to prevent injuries and fires, please pay attention to the following instructions:
- In order to prevent short circuit and so on, do not drop metal objects in the device.
- If there is smoke or peculiar smell from the device, please turn off the power at once.
- Please do not make the device fall or suffer strong collision. In order to prevent device failure, please observe the following note:
- Please do not install the device in places of strong sunlight, high temperature, high humidity, or dust.
- Please replace the fuse with one of the same specification. Using a fuse of a different specification may cause failure of the device.
- In order to prevent short circuit, please pull out the power wire when you replace the fuse.
- In order to be able to deal with road and traffic conditions changes at any time, please lower the volume when driving.
- Please do not get the device wet when washing the car, as this may cause a short circuit, leading to fire or other failures.
Warning
- Only connect the unit to a DC 12V power supply with negative grounding.
- Never install the unit where operation for safety driving is restrained.
- Never use the video display function in the front while driving to prevent violation of laws and regulations, and also to reduce the risk of traffic accidents, except when using for a rear-view video camera.
- Never expose the unit, amplifier, or speakers to moisture or water to prevent electronic sparks or fires.
- Please do not change the fuse in the power cord without professional guidance; improper fuse may cause damage to this unit or even cause fire.
Installation
The unit is installed for security. Please install it referring to the following diagram description:
- Please place the unit in the proper location, connect the unit as per the diagram, and test if it works well.
- Please wrap the connection line with insulation tape to ensure complete wiring after testing.
- Please bend the hook of metal 1, and insert the metal into the instrument panel, then fix it.
- Put the unit into the metal hook until it locks.
General Features
- 7" TFT HD Touch Screen BT/FM/TF/USB MP5 Rearview Camera
- 7-inch digital TFT Touch Screen
- With TF card Slot, With USB 2.0 port.
- 1080P Video Format
- Supports Audio playback formats: MP3/WMA/WAV/FLAC/OGG/APE.
- Supports Video playback formats: RM/RMVB/DVD(VOB)/VCD(DAT)/MP1/MP2/DIVX/XVID/MP4/H263/H264/FLV/3GP/SWF/AVI/ASF/MJPEG etc.
- MOSFET amplifier: 45 watts X 4 max power output.
- With Remote Control
- Power-off with auto-memory store function under radio or TF/USB mode
- Clock Function
- Mute Function
- BT Function
- Bass & Treble, L&R channel stabilizer
- Aux In Function
- Rearview camera Function
- Video input Function
Basic Operation
- When using the reversing rear-view function, connect the reversing video signal from the corresponding port. When reversing, it will automatically switch to the reversing visual state.
- Audio/Video input (optional): Connect audio/video lines, press 'Mode' to select AUX-2 state.
- Bluetooth function is only for units with Bluetooth.
After connecting the mobile, if the Bluetooth symbol turns green, the connection is okay. When calls come in, it will enter the Bluetooth interface automatically. Press [answer call icon] to answer the phone, press [hang up icon] to hang up the phone.
Wire Diagram
A diagram showing the ISO connector pinout and speaker connections. The ISO connector has pins for REARVIEW IN, VIDEO OUTPUT 1, RCA L, RCA R, VIDEO OUTPUT 2, VIDEO INPUT, and FM THE ANTENNA. The speaker system connections include Front Left, Front Right, Rear Left, and Rear Right speakers, along with Ground Wire, +12V Accessory/Switch, Power Antenna/Amplifier Turn On, +12V Constant Power Supply, and Parking Sensor Control wires.
Caution: Please check the speaker lines carefully before installation. If any grounding or touching occurs, please reconnect, or the unit will be burned.
Specification
- SNR: 65dB
- Frequency response: 20Hz-20KHz
- Loudspeaker impedance: 4Ω-8Ω
- The maximum output power: 4*45W
- Tone Control: Bass+/-7dB(100Hz), Treble+/-7dB(100Hz)
- FM frequency: 87.5MHz-108MHz
- Sensitivity: 25dB
- Selectivity: 60dB
- Separation: 35dB
Remote Control Description
A diagram of the remote control with numbered buttons and their corresponding functions:
- Power switch
- Right [arrow icon]
- Mode switch
- Last song [previous track icon]
- USB/SD
- Volume+ [volume up icon]
- Band/Automatic/Station search
- Digital key (0-9)
- UP [up arrow icon]
- Menu
- Confirm/Play/Pause [play/pause icon]
- Left [arrow icon]
- Under the [down arrow icon]
- Next song [next track icon]
- Choice
- Volume- [volume down icon]
- Answer the phone [phone icon]
- Hang up [phone icon]
Front Panel
A diagram of the front panel with numbered buttons and their functions:
- Last song [previous track icon]
- Next Song [next track icon]
- Power: Press and hold to turn on/off. Press briefly to enter Switch mode.
- Knob Button: Adjust VOL+/VOL-. Press briefly to enter BASS/TRE/BAL/EQ/LOUD/VOL/BRIGHT settings.
- TF
- AUX
- RES [reset icon]
- USB
- MIC
- IR
- Volume+/Volume- [volume up/down icons]
- Clock: Press to adjust Date/Time.
- Bright: Press to enter Bright mode.
- BT: Press to enter BT mode.
- Home
- Radio
- Music
- Movie
- Photo
- Explorer
- Bluetooth
- AUX in
- Setting
The HOME screen displays icons for Radio (收音机), Disc (碟片), USB, SD, Bluetooth (蓝牙), AV IN, and Settings (设置). The time and date are displayed as 00:10, Thursday, 2015-01-01.
RADIO
The RADIO screen shows frequency tuning options from 87.50 to 108.00 MHz, with preset stations labeled 1 through 5. It displays the current frequency as 87.50 MHz and includes navigation arrows for tuning.
MUSIC
The MUSIC screen displays equalizer settings with sliders for different frequency bands and an 'AUTO ON' toggle switch.
MOVIE
The MOVIE screen shows a video playback interface with playback controls (play/pause, next/previous track, fast forward/rewind) and status information including connection status (Telekom.de), current time (58:12), and remaining time (-31:57).
PHOTO
The PHOTO screen displays an image of a woman.
BLUETOOTH
The BLUETOOTH screen shows a Bluetooth connection interface with playback controls and status indicators. It displays the time as 00:03 and shows a Bluetooth symbol.
SETTING
The SETTING screen displays audio settings, including volume balance (LR/FR), and sound modes like LOUD and SUB. It also shows a car audio positioning graphic.
FCC Caution
FCC Caution.
(1)§ 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
§ 15.21 Changes or modification warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Mobile device: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
