Aldes RF GALVA D710 Galvanized Steel Connector
Product Reference: 11094136
Product Name: RF GALVA - D710
System Type: Rigid Galvanized, Aluminum, and Special Ducts
Product Description
The female connector is designed to connect two galvanized accessories together. It facilitates the connection of two galvanized accessories of the same diameter within tertiary and collective networks.
Areas of Application
Residential collective housing, new construction, renovation, and tertiary sector premises.
Installation
- Easy installation of accessories through push-fit connection: ducts are female, accessories are male.
- Sealing is achieved by applying sealant and/or gasket tape.
- Fixation to the duct is done using self-drilling screws (4 to 6 depending on the diameter).
Key Features
- Connection between two accessories of the same diameter in tertiary and collective networks.
- Connector made of galvanized steel with a diameter of 710 mm.
- Available in diameters ranging from 80 mm to 900 mm.
- Made of galvanized steel compliant with standard EN 10346, ensuring coating consistency.
- Fire classification: MO.
General Data
References
11094136
Dimensional Data
| Reference | Ø (mm) | Ø A (mm) |
|---|---|---|
| 11094136 | 710 | 710 |
Diagram:
A schematic shows a female connector with an outer diameter (Ø A) of 710 mm and an inner diameter (Ø) of 710 mm, indicating a direct fit for connecting two ducts of the same size.
Regulatory Data
References
11094136
Fire Classification
MO
