Ubiquiti airFiber 60 XR
Datasheet AF60-XR
The airFiber® 60 XR (AF60 XR) is a 60 GHz radio designed to facilitate 2.5+ Gbps connectivity over very long distances. The AF60 XR features an integrated, high-gain dish antenna that delivers high speed, long-range, point-to-point (PtP) links. Its new Wave Technology also offers incredible, long-range performance within the 60 GHz spectrum. Additionally, the AF60 XR has a built-in, 5 GHz failover radio for operational redundancy as well as a Bluetooth management radio to simplify setup and configuration.
Mechanical Specifications
| Property | Value |
|---|---|
| Dimensions | 779 x 664 x 383 mm (30.68 x 26.14 x 15.06 inches) |
| Weight | Without mount: 8.6 kg (19 lb) With mount: 13 kg (28.7 lb) |
| Enclosure material | UV stabilized polycarbonate, steel |
| Mount Material | Galvanized steel |
| Mounting | Precision Alignment Kit (included) Pole compatibility: Ø40-80 mm (Ø1.5-3.15 inches) |
| Wind loading | 422 N at 200 km/h (94.86 lbf at 125 mph) |
| Weatherproofing | IPX6 |
Hardware Specifications
| Property | Value |
|---|---|
| Processor | Quad-Core ARM® Cortex® A53 at 1.4 GHz |
| Memory | 1 GB DDR3L |
| Networking interface | (1) GbE RJ45 port (1) 1/10G SFP+ port |
| Button | Factory reset |
| RF connections | Internal |
| Max. power consumption | 24 W |
| Power method | Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-) or 2-pairs (4, 5+; 7, 8-) |
| Power supply | 48VDC, 0.65A gigabit PoE adapter (included) |
| Supported voltage range | 48V ±10% |
| Operating temperature | -40 to 55°C (-40 to 131°F) |
| Operating humidity | 5-95% noncondensing |
| Certifications | FCC, IC, CE |
LED Indicators
| LED | Status Description |
|---|---|
| Power | Flashing white: bootup in progress White: not connected to UISP™ console Blue: connected to UISP console |
| Ethernet | Flashing blue: ethernet activity |
| GPS | Blue: receiving at least (4) GPS satellite signals |
| 60G | Blue: active connection |
| 5G | Blue: active connection |
Software Specifications
| Property | Value |
|---|---|
| OS | aiOS® |
| Operating mode | PtP only |
| Ubiquiti specific features | Integrated 60 GHz radio, discovery protocol, Wave technology |
| Network | Bridge mode |
| Services | UISP™; ping watchdog, NTP client, device discovery |
| Tools | Antenna alignment, discovery utility, ping, trace route, speed test |
| Software management | Bluetooth management for easy setup over UISP app WEB UI |
| Minimum software requirements | Any modern WEB browser/iOS or Android based smartphone |
System Specifications
| Property | Value |
|---|---|
| Maximum throughput | 2.5+ Gbps |
| Maximum range | 15 km |
RF Specifications
| Property | Value |
|---|---|
| Operating frequency* | 57-71 GHz* *Depends on regulatory regions. |
| Channel bandwidth | 2160, 1080 MHz |
| Operating channels* | 58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120 MHz *Depends on regulatory regions. |
| Modulation | BPSK, QPSK |
| Beamwidth | HPOL: NaN (the antenna is only vertically polarized) VPOL: ±1° Elevation: ±1° |
| Management radio | 2400-2483.5 MHz |
| Electrical downtilt | 0° |
Back-Up RF Specifications
| Property | Region/Band | Value |
|---|---|---|
| Operating frequency* | US/CA U-NII-1 | 5150-5250 MHz |
| US/CA U-NII-3 | 5725-5850 MHz | |
| Worldwide | 5150-5875 MHz *Depends on regulatory regions. | |
| Channel bandwidth | 20, 40, 80 MHz | |
| Modulation | BPSK (%), QPSK (%), QPSK (%), 16QAM (%), 16QAM (%), 64QAM (2/3), 64QAM (%), 64QAM (5/6), 256QAM (%), 256QAM (5/6) | |
| Beamwidth | HPOL: 7° VPOL: 7° Elevation: 7° | |
| Cross-pol isolation | 14 dB | |
| Electrical downtilt | 0° |
Compliance
FCC
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
This radio transmitter FCC ID: SWX-AF60XR has been approved by FCC.
ISED Canada
CAN ICES-3(A)/NMB-3(A)
This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device.
This radio transmitter IC: 6545A-AF60XR has been approved by ISED Canada.
CAN ICES-3(A)/NMB-3(A)
Le présent appareil est conforme aux CNR d'ISDE Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1. l'appareil ne doit pas produire de brouillage; 2. l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Le présent émetteur radio IC: 6545A-AF60XR a été approuvé par ISDE Canada.
Avertissement:
(ii) pour les dispositifs munis d'antennes amovibles, le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5725 à 5850 MHz ) doit être conforme à la limite de la p.i.r.e. spécifiée, selon le cas; (detachable antenna only)
(iii) lorsqu'il y a lieu, les types d'antennes (s'il y en a plusieurs), les numéros de modèle de l'antenne et les pires angles d'inclinaison nécessaires pour rester conforme à l'exigence de la p.i.r.e. applicable au masque d'élévation, énoncée à la section 6.2.2.3, doivent être clairement indiqués.
FOR MOBILE DEVICE USAGE (>20cm/low power)
Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 20 cm between the radiator & your body.
Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à plus de 1000 cm entre le radiateur et votre corps.
The tilt angle is limited to 15 degrees due to the bracket used for installation.
Professional installation instruction
| Section | Details |
|---|---|
| 1. Installation personal | This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting. |
| 2. Installation location | The product shall be installed at a location where the radiating antenna can be kept 1000cm from nearby person in normal operation condition to meet regulatory RF exposure requirement. |
| 3. External antenna | Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may produce unwanted spurious or excessive RF transmitting power which may lead to the violation of FCC/ISED limit and is prohibited. |
| 4. Installation procedure | Please refer to user’s manual for the detail. |
| 5. Warning | Please carefully select the installation position and make sure that the final output power does not exceed the limit set force in relevant rules. The violation of the rule could lead to serious federal penalty. |
Instructions d'installation professionnelle
| Section | Details |
|---|---|
| 1. Installation | Ce produit est destine a un usage specifique et doit etre installe par un personnel qualifie maitrisant les radiofrequences et les regles s'y rapportant. L'installation et les reglages ne doivent pas etre modifies par l'utilisateur final. |
| 2. Emplacement d'installation | En usage normal, afin de respecter les exigences reglementaires concernant l'exposition aux radiofrequences, ce produit doit etre installe de facon a respecter une distance de 1000 cm entre l'antenne emettrice et les personnes. |
| 3. Antenne externe. | Utiliser uniquement les antennes approuvees par le fabricant. L'utilisation d'autres antennes peut conduire a un niveau de rayonnement essentiel ou non essentiel depassant les niveaux limites definis par FCC/ISED, ce qui est interdit. |
| 4. Procedure d'installation | Consulter le manuel d'utilisation. |
| 5. Avertissement | Choisir avec soin la position d'installation et s'assurer que la puissance de sortie ne depasse pas les limites en vigueur. La violation de cette regle peut conduire a de serieuses penalites federales. |
Ubiquiti - Compliance
Ubiquiti - Warranty
