Bullet - SPK - Spotlight on Spike

All installations must be carried out by a qualified electrician following local regulations. Make sure that the power is switched off before installation. Please read and follow the 'Installation instructions' and 'Safety instructions' sections carefully before commencing installation. Installation of this model can change from time to time; please read instructions every time before installation. For detailed specifications, please visit the Eurotech Lighting website: eurotechlighting.co.nz.

Product Information

Product Visual: A black, compact spotlight with an adjustable head mounted on a ground spike.

Dimensions: The spotlight housing has a diameter of 36mm and a length of 90mm. The height of the housing is 58mm. The ground spike is 170mm long.

Installation Instructions

1. Ensure power is turned off. Insert the spike into the ground. Ensure scoria is placed in the hole for drainage.
2. Connect the head of the fitting to the spike.
3. Connect cables to your remote driver, paying attention to live (+) and neutral (-) markings. Blue wire indicates Negative, and Brown wire indicates Positive.
4. Verify the installation is correct before switching on the fitting to test.

Safety Instructions

Read these instructions carefully before commencing installation.

• The light source in this luminaire shall only be replaced by the manufacturer, their service agent, or a similarly qualified person.
• This LED luminaire must be installed by a licensed electrician ONLY, following all local regulations.
• Ensure that cables are not squeezed or damaged by sharp edges.
• Clean the light with a soft cloth and a standard pH-neutral detergent.
• Misuse or changes to the appliance will void all warranties.
• Do not install on a surface that is unsuitable or deformed.
• Do not install on or above a surface with a high temperature.
• There should not be any corrosive or explosive materials present.