LIGHT MY BRICKS 21342 LED Lighting Kit for LEGO Insect Collection Installation Guide

Installation Guide for LIGHT MY BRICKS models including: 21342 LED Lighting Kit for LEGO Insect Collection, 21342, LED Lighting Kit for LEGO Insect Collection, LEGO Insect Collection, Insect Collection, Collection

Istruzioni per l'installazione

Kit di illuminazione a LED per LEGO 21342 Collezione di insetti, 49.90 CHF

Installationsanleitung (Englisch)

LED Licht Set für LEGO 21342 Die Insektensammlung - Spielwaren & LEGO

THE INSECT COLLECTION #21342 LIGHT KIT ...

LEGO THE INSECT COLLECTION #21342 LIGHT KIT INSTALLATION GUIDE

File Info : application/pdf, 44 Pages, 13.12MB

103433 ba01

LEGO® THE INSECT COLLECTION #21342 LIGHT KIT
INSTALLATION GUIDE

Light My Bricks
LEGO® THE INSECT COLLECTION 21342 INSTALLATION GUIDE
Hi There! We're here to help you get started on the LEGO® The Insect Collection 21342 Light Kit. This PDF details the instructions for the LED light kit only. If you run into any issues, please refer to the troubleshooting section towards the end of this guide. Have fun and enjoy!
INSTALLATION GUIDE

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE 2

PACKAGE CONTENTS:
Individual Bags
· 2x Pink 30cm Large Bit Light · 3x Warm White 30cm Large Bit Light · 2x Light Blue 30cm Large Bit Light · 3x Red 30cm Bit Light · 1x Yellow 15cm Bit Light
Connecting Cables
2x 30cm Connecting Cable
USB Power Cable
1x USB Power Cable (Power Source not Included)

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE
Mixed Components 1
3x 6-Port Expansion Board 6x Adhesive Square
Mixed Components 2
3x Plate, Round 1x1 - Trans Clear 3x Plate, Round 1x1 - Red 1x Plate, Round 1x1 - Trans Dark Green 1x Plate, Round 1x1 - Trans Dark Blue 1x Plate, Round 1x1 - Trans Yellow
Mixed Components 3
2x Technic, Pin 1/2 without Friction Ridges - Light Bluish Gray 6x Plate, Round 1x1 with Bar Handle - Black 3x Arm Skeleton, Bent with Clips (Horizontal Grip) - Black 3x Brick, Round 1x1 Open Stud - Black

PACKAGE CONTENTS

Contents

Before You Begin

Blueprint

Instructions

Final Product

Troubleshooting

Contact

CONTENTS

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE 4

Before You Begin
Laying cables in between and underneath bricks
Cables can fit in between and underneath LEGO® bricks, plates, and tiles providing they are laid correctly between the LEGO® studs. Do NOT forcefully join LEGO® together around cables; instead ensure they are laying comfortably in between each stud. CAUTION: Forcing LEGO® to connect over a cable can result in damaging the cable and light.
BEFORE YOU BEGIN

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE
Connecting Cable Connectors To Expansion Boards
Take extra care when inserting connectors to ports of Expansion Boards. Connectors can be inserted only one way. With the expansion board facing up, look for the soldered "=" symbol on the left side of the port. The connector side with the wires exposed should be facing toward the soldered "=" symbol as you insert into the port. If a plug won't fit easily into a port connector, do not force it. Incorrectly inserting the connector can result in bent pins inside the port or possible overheating of the expansion board when connected.
5

Before You Begin
Connecting Cable Connectors To Strip Lights
Take extra care when inserting connectors to ports on the Strip Lights. Connectors can be inserted only one way. With the Strip Light facing up, ensure the side of the connector with the wires exposed is facing down. If a plug won't fit easily into a port connector, don't force it. Doing so will damage the plug and the connector.
BEFORE YOU BEGIN

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE
Connecting Micro Cable Connectors To Micro Expansion Board Ports
Take extra care when inserting the micro connectors to micro ports of Micro Expansion Boards. Connecting Micro Bit Lights to Micro Expansion Boards is similar to connecting lights and cables to Strip Lights. With the expansion board facing up, ensure the side of the connector with the wires exposed is facing down. If a plug won't fit easily into a port connector, do not force it. Use your fingernail to push the plastic part of the connector to the micro port.
6

Before You Begin
Installing Bit Lights Under Lego® Bricks And Plates
When installing Bit Lights under LEGO® pieces, ensure they are placed the correct way up (Yellow LED component exposed). You can either place them directly on top of LEGO® studs or in between.
BEFORE YOU BEGIN

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE 7

Before You Begin
The Symbols Used In This Guide
When going through the following guide you will come across symbols and formats that will assist with the installation of your light kit. Take notice of them as each has a specific purpose.
Light Kit Component
This is the most important image format as it indicates which part to use from the Light Kit. Make sure you pay close attention to which part is shown.
White 30cm Bit Light
BEFORE YOU BEGIN

Connect
Used when you need to connect a LEGO piece or LMB component.
Disconnect
Used when you need to remove a LEGO piece/ section or LMB component.
Directional
Used to show where to route cables, place components, or move them.
Bend/Pivot
Used when a component needs to be bent, or part folded or pivoted.

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE
Turn/ Flip
Will be found in the top left corner when the set needs to be rotated or flipped.
Twist/ Braid
Seen when a set of cables need to be grouped and twisted together.
Power On Test
Found at the end of a major step to test the lights. Will be located in the top left corner.
Note
Notes will be found alongside the instruction photos and explain what to do.
8

Before You Begin

Repeat Step

Repeat the previous step eg.

Make a spotlight, then make a

second spotlight.

Connect Focus
Used to highlight a hard to see area where a component is being connected.

Disconnect Focus
Used to highlight a hard to see area where a component is being disconnected.

General Focus
Used to highlight a hard to see area where a component needs to be acted on.

BEFORE YOU BEGIN

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE

General Note
This is a sample note that is used anywhere in this guide. It will explain a difficult section where photos are hard to illustrate or easily confused.
Connect Note
The green coloured note is used when the topic focuses on a component being connected, like the shown Power Bank.
Disconnect Note
The red coloured note is used when the topic focuses on a component being disconnected or like here, the removed pieces.

NOTE
Take the 5cm Connecting Cable from the 4-Port Micro Expansion Board and route it into the "IN" port of the Flicker Effects Board
NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack (sold separately)
NOTE
You should have these parts left over that were removed from the LEGO set

Removed Pieces 9

BLUEPRINT

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE

BLUEPRINT

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS
To ensure a smooth installation of your light kit, please read and follow each step carefully. If you run into any issues, please refer to the online troubleshooting guide.

Wenn Sie Probleme mit Ihrem Light My Bricks-Set haben, sehen Sie sich unser Video zur Fehlerbehebung an oder lesen Sie die Auflistung der häufigsten Ursachen, die Ihnen bei der Fehlersuche helfen hier.
Si vous rencontrez des problèmes avec votre kit Light My Bricks, regardez notre vidéo de dépannage ou consultez la liste des causes les plus fréquentes pour vous aider à les résoudre ici.
Se si verificano problemi con il set Light My Bricks, guardare il nostro video per la risoluzione dei problemi o leggere l'elenco delle cause più comuni per la risoluzione dei problemi qui.

INSTRUCTIONS

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE

Plate, Round 1x1 - Red

Red 30cm Bit Light

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE
3

NOTE

Use the LEGO Brick Separator Tool to pry apart pieces and section throughout the guide.

6-Port Expansion Board

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE Red 30cm Bit Light
5

Plate, Round 1x1 - Red

Warm White 30cm Large Bit Light

Brick, Round 1x1 Open Stud - Black

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

NOTE
Ensure the Bit Light is positioned at the end of the barrel when connecting the following piece.
Plate, Round 1x1 with Bar Handle - Black

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE
Arm Skeleton, Bent with Clips (Horizontal Grip) - Black
Plate, Round 1x1 with Bar Handle - Black
Plate, Round 1x1 - Trans-Dark Green

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE
7

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE
8
Plate, Round 1x1 - Red
Red 30cm Bit Light

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE
9
10

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE

NOTE
Ensure the cables are threaded along the tile and in the gap when connecting it.

30cm Connecting Cable USB Power Cable

2x Adhesive Square

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE

NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack (sold separately)

NOTE
If you wish, remove the green stud on the spotlight to have a warm white light instead.
! If you experience any issues with the
lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies (with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

Warm White 30cm Large Bit Light

Brick, Round 1x1 Open Stud - Black

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE
NOTE
Ensure the Bit Light is positioned at the end of the barrel when connecting the following piece. Plate, Round 1x1 with Bar Handle
- Black

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

Arm Skeleton, Bent with Clips (Horizontal Grip) - Black
Plate, Round 1x1 with Bar Handle - Black
Plate, Round 1x1 - Trans-Dark Blue

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE Pink 30cm Large Bit Light

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE 6-Port Expansion Board

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE Pink 30cm Large Bit Light

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE Plate, Round 1x1 - Trans-Clear

NOTE
Slightly pull the gold claw piece backwards so there is a gap as shown.
Yellow 15cm Bit Light

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE

30cm Connecting Cable

NOTE
Take the 30cm Connecting Cable from the Mantis base and connect it to the 6-Port Expansion Board on the Butterfly base.

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

2x Adhesive Square

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE
! If you experience any issues with the
lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies (with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.

NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack (sold separately)

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

Warm White 30cm Large Bit Light

Brick, Round 1x1 Open Stud - Black

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

Plate, Round 1x1 with Bar Handle - Black
Plate, Round 1x1 - Trans-Yellow

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

Light Blue 30cm Large Bit Light
Plate, Round 1x1 - Trans-Clear
Technic, Pin 1/2 without Friction Ridges - Light Bluish Gray

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE Light Blue 30cm Large Bit Light
Plate, Round 1x1 - Trans-Clear
Technic, Pin 1/2 without Friction Ridges - Light Bluish Gray

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE

6-Port Expansion Board

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

NOTE
Take the 30cm Connecting Cable from the Butterfly base and connect it to the 6-Port Expansion Board on the Beetle base.

2x Adhesive Square

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE

NOTE
Connect to a 5V USB Power Bank, 5V USB Wall Adaptor, or USB to AA Battery Pack (sold separately)

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE

NOTE
You can remove the coloured studs on the spotlights to have it look warm white like this.
! If you experience any issues with the
lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies (with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
NOTE
You should have these parts left over that were removed from the LEGO set

Removed Pieces

INSTRUCTIONS

DISCONNECT

CONNECT

DIRECTIONAL

BEND / PIVOT

TURN / FLIP

TWIST / BRAID

POWER ON TEST

NOTE ICON

FINAL PRODUCT
This finally completes installation of the Light My Bricks LEGO® The Insect Collection 21342 Light Kit.

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE

FINAL PRODUCT

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE

TROUBLESHOOTING

Light My Bricks lighting kits contain individual components that are very small and can be easily damaged if not handled correctly.

To prevent unnecessary damage to components, we highly recommend that the User Guide section, "Important things to note" is read carefully. Follow the handling procedures in the User Guide to help prevent faults and damages to your Light My Bricks components.

If you are experiencing issues with your Light My Bricks set, watch our troubleshooting video or read on for a list of common causes to help you troubleshoot.

TROUBLESHOOTING

Troubleshooting
Firstly, ensure that the batteries have power using a battery charge gauge. If the batteries have no power, replace the batteries. If the batteries still have power, check to see if the batteries have been inserted correctly into the battery pack.
TROUBLESHOOTING

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE
Check for AA batteries using the AA battery pack
Inside the battery pack are symbols indicating which direction the AA battery should be inserted. The flat side of the battery should be paired with the spring side of the battery pack. If the batteries have been installed correctly and your kit still isn't operating correctly, the next step is to check the wiring.
40

Troubleshooting

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE

Check Your Wires

In order for Light My Bricks components to fit in between and underneath LEGO® bricks, the components need to be very small. Due to this nature, Light My Bricks components can be easily damaged when not handled correctly.
Be careful when removing unpacked components out of the packaging and ensure not to forcibly pull at the wires as this can damage the soldering that attach the wires to the LEDs.

If the wiring is detached from the LED itself, the light will not operate.
When connecting lights to your LEGO® set, check that there are no pinched wires underneath or in between bricks and plates. When the wires are pinched and the exposed wires are touching each other, this can cause a crosswire and the lights to not function correctly.

TROUBLESHOOTING

Troubleshooting
Check Your Expansion Board Ports/ Strip Light Ports / Effects Board Ports
It is important to note that connectors can only be inserted to the expansion board, strip light, or effects board ports in one direction. Forcibly inserting connectors in the incorrect direction will result in damaging the pins inside each of the ports on your component board. Not only will a light connected to the damaged port not work, but if the pins inside the port are bent to a point they are touching each other, this can result in all other lights in the system to stop working. This is a short circuit.
TROUBLESHOOTING

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE
A short circuit can also result in overheating of the board, cable or batteries. If you suspect a short circuit, DISCONNECT POWER IMMEDIATELY Batteries can fail, catch fire, or even explode if left connected to a short circuit for too long. If you suspect you have a faulty component due to a bent pin, try the following steps: If you look carefully inside each of the ports, each port contains 2 small pins that should be straight. You will be able to identify a faulty port if it has any bent pins.
42

LEGO® THE INSECT COLLECTION 21342 LIGHT KIT INSTALL GUIDE
CONTACT US
If you have an enquiry regarding the online shop, our products or a general enquiry please refer to our Frequently Asked Questions webpage. Alternatively, you can contact our Customer Services team by visiting our online support portal.
support.lightmybrick.com
We thank you for purchasing this product and hope you enjoy!

TROUBLESHOOTING

lightmybricks.com
© 2023 Light My Bricks Pty Ltd - Head Office: 4/26 Rushdale Street, Knoxfield VIC 3180, Australia. Phone: +61 420 643 543 | All Rights Reserved | Light My BricksTM sell LED lighting kits only. All LEGO® sets featured in images are sold separately. Light My BricksTM and the Light My Bricks logo, are trademarks and copyrights of Light My Bricks Pty Ltd. LEGO® is a trademark of the LEGO® Group of Companies which does not sponsor, authorise, or endorse this document.

References

Adobe InDesign 19.0 (Windows) Adobe PDF Library 17.0