MSI MAG PANO M100R PZ PC Case User Guide
Specifications
Basic Information
| Case Type | Mid Tower |
|---|---|
| Dimensions (DxWxH) | 440 x 235 x 405 mm |
| Supported Motherboard Sizes | Micro-ATX*, Mini-ITX *Supports Micro-ATX back-connect motherboard |
Cooling Fan Support
| Location | Support |
|---|---|
| Top | 3 x 120mm or 2 x 140mm |
| Front | No |
| Rear | 1 x 120mm or 1 x 140mm (Pre-installed 1 x 120mm ARGB fan) |
| Side | 3 x 120mm (Pre-installed 3 x 120mm ARGB fans) |
| Bottom | 1 x 120mm |
| PSU Shroud | 2 x 120mm |
Expansion Slots
| PCIe Slots | 5 slots |
|---|
Drive Bays
| Type | Quantity |
|---|---|
| 2.5" SSD | 1 |
| 3.5" HDD Combo | 1 |
| 3.5"/2.5" | 2 x 2.5" or 1 x 2.5" + 1 x 3.5" |
I/O Ports and Buttons
| USB Ports | 1 x USB 3.2 Gen1 Type-A ? 1 x USB 3.2 Gen 2x2 Type-C ? |
|---|---|
| Audio Ports | 1 x Audio/Microphone combo jack ? |
| Buttons | 1 x Power button ? 1 x LED switch button ? |
Chassis Clearances
| Maximum CPU Cooler Height | 175 mm |
|---|---|
| Maximum GPU Length | 390 mm |
| Top Radiator Support | 120 / 240 / 360 mm |
| Rear Radiator Support | 120 / 140 mm |
| PSU Support | 200mm |
Materials
| Component | Material |
|---|---|
| Metal Specification | SPCC 0.7 mm |
| Front Bezel Material | 4mm tempered glass |
| Left Side Panel | 4mm tempered glass |
| Top Bezel | Internal plastic structure enclosed in metal |
| Dust Filter | Top: Plastic filter Bottom: Plastic, magnetic frame |
| GPU holder | Aluminum |
Accessories
| Item | Name / Q'ty | Used for |
|---|---|---|
| 1 | Cable ties x5 | Cable management |
| 2 | Screw M3 5mm x20 | Motherboard / SSD |
| 3 | Screw #6-32 5mm x8 | 3.5" HDD |
| 4 | Screw #6-32 6mm x6 | Securing PSU / PCIe Card |
| 5 | Stand-off #6-32 6.5mm x4 | Motherboard Stud |
| 6 | Screw #6-32 30mm x8 | Securing fans on the PSU shroud |
| 7 | Stand-off Mounting Tool x1 | Securing stand-off |
| 8 | Spare U Clip x2 | Securing side panel |
| 9 | GPU Holder x1 | Reinforcing the graphics card |
| 10 | Spirit level x1 | Adjusting the horizontal of GPU |
| 11 | Hook-and-loop fastener x2 | Cable management |
Case Features
The MSI MAG PANO M100R PZ PC Case is designed for optimal airflow and component visibility. Key features include:
- Tempered glass side and front panels for showcasing internal components.
- Support for multiple cooling fans and radiators for efficient thermal management.
- Ample space for storage devices (SSDs and HDDs).
- Convenient front I/O panel for easy access to USB and audio ports.
- Included accessories for cable management and component installation.
Dimensions
The external dimensions of the case are 440mm (Depth) x 235mm (Width) x 405mm (Height).
Visual representation of the case dimensions:
- Depth: 440mm
- Width: 235mm
- Height: 405mm
I/O Ports and Buttons
The front panel features the following I/O ports and buttons:
- USB 3.2 Gen 2 2x2 Type-C port ?: For high-speed data transfer and modern device connectivity.
- USB 3.2 Gen 1 Type-A port ?: For standard USB devices.
- Audio/Microphone combo jack ?: For connecting headsets or microphones.
- LED switch button ?: Controls RGB lighting effects.
- Power button ?: Turns the system on/off.
Side Panel Removal
The side panel is secured using snap-fit clips. To remove:
- Identify the clips holding the side panel in place.
- Gently release the clips to detach the panel.
Refer to the diagram for clip locations.
Front Bezel Removal
Before removing the front bezel, ensure both side panels are removed. Then, gently pull the front panel away from the chassis.
Top Panel Removal
Follow the numbered steps in the diagram to remove the top panel.
Motherboard Installation
Install the motherboard by aligning it with the standoffs inside the case and securing it with screws. Ensure correct orientation and screw placement.
Graphics Card Installation
Install the graphics card into the appropriate PCIe slot. Remove the corresponding expansion slot covers, insert the card firmly, and secure it with screws or the case's retention mechanism.
SSD Installation
Install 2.5" SSDs into the designated drive bays or mounting points using the provided screws.
PSU Installation
Mount the Power Supply Unit (PSU) in its designated location, typically at the bottom of the case, and secure it with screws.
Top Panel I/O Connection
Connect the front panel I/O cables to the corresponding headers on the motherboard:
- HD AUDIO: Connects to the JAUD1 header for audio jacks.
- F_PANEL: Connects to the JFP1 header for power/reset buttons and LEDs.
- JUSB (USB 3.2 Gen2): Connects to the USB 3.2 Gen 2x2 header.
- JUSB (USB 3.2 Gen1): Connects to the USB 3.2 Gen1 header.
Control Board Connection
Connect the control board for RGB lighting and fan control:
- LED Switch button: Connects to the control board.
- ARGB LED Strip Connection: Connect the ARGB LED strip to the control board's ARGB connector, potentially using an extension cable. Ensure it's connected to the +5V pin.
- Addressable RGB LED Fan Connection: Connect ARGB fans to the control board's ARGB connectors.
- Motherboard fan connector: Connect case fans to the motherboard's fan headers for speed control.
- Motherboard ARGB connector and Power supply's SATA connector: Ensure the control board receives power via SATA from the PSU and can sync with the motherboard's ARGB header if desired.
IMPORTANT: Always turn off the power supply and unplug the power cord before installing or removing ARGB components. The system supports a maximum of 80 LEDs; exceeding this may cause issues.
LED Switch Button Function
- Single press: Toggles between LED effects.
- Long press (3 seconds): Syncs with the motherboard's RGB software.
- Long press (6 seconds): Turns off lights (lights flash four times). Press once to turn them back on.
LED Effect Sequence
The LED effect sequence upon pressing the LED Switch button is as follows:
- ? Rainbow
- ? Rainbow trail
- ? Rainbow gradient
- ? Purple
- ⚪ White
- ? Blue
- ? Cyan
- ? Green
- ? Yellow
- ? Red
- ? Rainbow ? breathing
- ? Red ? breathing
- ? Yellow ? breathing
- ? Green ? breathing
- ? Cyan ? breathing
- ? Blue ? breathing
- ⚪ White ? breathing
- ? Purple ? breathing
- ? Static rainbow
- ? Red
- ? Yellow
- ? Green
- ? Cyan
- ? Blue
- ⚪ White
- ? Purple
General Information
Copyright Notice: Copyright © Micro-Star Int'l Co., Ltd. All rights reserved. The MSI logo is a registered trademark of Micro-Star Int'l Co., Ltd. Other marks and names may be trademarks of their respective owners. MSI reserves the right to change this document without prior notice.
Revision History: Version 1.0, 2024/01, First release.
