AIYAPLAY Children's House Bed Frame

Model: IN240200199V02_UK_FR_DE_ES_PT_IT, 313-016V00

Product Overview

This document provides assembly instructions, safety warnings, and maintenance guidelines for the AIYAPLAY Children's House Bed Frame. It is designed for children aged 3 years and older, with a maximum weight capacity of 60 kg.

Dimensions: 195 cm (Length) x 97 cm (Width) x 135 cm (Height).

Warranty: A 2-year statutory warranty covers normal use.

Important Safety Warnings

CHOKING HAZARD: Contains small parts. Not suitable for children under 3 years.
Assembly must be performed by a competent adult only.
Keep children away from the product during assembly due to the risk of injury.
The product must be used under the direct supervision of an adult.
Place the bed on a flat, clean floor and ensure all parts are securely connected before use.
DO NOT place the product near windows, as it could be used as a step by a child, leading to falls.
Be aware of the risk posed by open fires and other heat sources near the product.
DO NOT place the product near windows where blind or curtain cords could pose a strangulation hazard to children.
Do not use the bed if any part is broken, torn, or missing. Only use spare parts approved by the manufacturer.
All assembly fittings should be tightened properly and regularly checked to ensure they remain secure.

Parts List

The following parts are included for assembly:

Part 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18 (various wooden components)
Hardware A: 26 screws (Ø4 x 30mm)
Hardware B: 4 screws (M6 x 80mm)
Hardware C: 32 screws (Ø8 x 30mm)
Hardware D: 14 screws (Ø6 x 60mm)
Hardware E: 1 Allen key
Hardware F: 4 screws (Ø6 x 50mm)
Hardware G: 2 screws (M6 x 20mm)
Hardware H: 8 screws (M6 x 60mm)
Hardware J: 8 screws (Ø6 x 60mm)
Hardware K: 10 screws (Ø6 x 80mm)

Assembly Instructions

Follow these steps for assembly:

Step 1: Assemble the base frame. Connect side rails (01, 02) to front/back rails (05, 06) using screws (A, B, K) and dowels (C).
Step 2: Attach vertical supports (03, 04) to the base frame.
Step 3: Assemble the roof structure. Connect angled roof supports (13, 17) and crossbars (14, 15, 18) to the vertical supports using screws (C, D, E, H, J, K).
Step 4: Install remaining structural elements (e.g., parts 07, 08, 09, 10, 11) using appropriate hardware.
Step 5: Place and secure the bed slats (e.g., part 16) onto the frame using screws (A).
Step 6: Ensure all fittings are tightened properly.

Note: Refer to the original document's diagrams for detailed visual guidance on assembly steps.

Maintenance & Care

Keep all instructions and parts for future reference.
For wood surfaces: Regularly dust with a clean, soft, and dry cloth.
Do not use abrasive or acidic cleaning products. Never use cleaning solvents. Professional cleaning is recommended if necessary.

Contact Information

For any questions or assistance, please contact the relevant customer care center:

United Kingdom

AIYAPLAY Children's House Bed Frame

Product Overview

Important Safety Warnings

Parts List

Assembly Instructions

Maintenance & Care

Contact Information

United Kingdom

Spain

France

Portugal

Germany

Italy