KickAss Products – 12V, 4WD, Caravan, Camping and Outdoor Specialist
KickAss Products – 12V, 4WD, Caravan, Camping and Outdoor Specialist
User Manual for KICKASS models including: KAJB, Portable Power Station with Integrated 25A DCDC Charger, KAJB Portable Power Station with Integrated 25A DCDC Charger
prieš 1 dieną — INTRODUCTION. IMPORTANT SAFETY INSTRUCTIONS. OVERVIEW. GETTING STARTED. BATTERY TO USE. OPTIONAL ACCESSORIES. - MOUNTING TRAY. - JUMPER CABLES.
QC3.0 USB. CIGARETTE ... 2 x Dual USB / QC3.0 Outputs. = 2 x 2.4A High Powered USB. (White). = 2 x Quick Charge QC 3.0 Ultra. High Powered USB Outputs.
INTRODUCTION. IMPORTANT SAFETY INSTRUCTIONS. OVERVIEW. GETTING STARTED. BATTERY TO USE. OPTIONAL ACCESSORIES. - MOUNTING TRAY. - JUMPER CABLES.
File Info : application/pdf, 21 Pages, 7.88MB
DocumentDocumentAGM POWER STATION USER MANUAL WITHOUT DCDC CHARER PATENT PENDING WITH DCDC CHARER VER 0.4 TABLE OF CONTENT IN--T--R--O--D--U--C---T-I-O---N-------------------------------------------------------------------------- 1 IM--P--O--R---T-A--N---T--S--A--F--E--T--Y---I-N--S--T--R--U--C--T--I-O--N--S-------------------------------------------- 1 O-V--E--R--V--I-E--W---------------------------------------------------------------------------------- 2 G-E--T--T--I-N--G---S--T--A--R--T--E--D--------------------------------------------------------------------- 3 B-A--T--T--E--R--Y--T--O---U--S--E------------------------------------------------------------------------ 4 O-P--T--I-O--N--A--L---A--C--C--E--S--S--O---R--I-E--S----------------------------------------------------------- 5 - -M--O--U---N--T--IN---G---T--R--A-Y----------------------------------------------------------------------- 5 - -J-U--M---P--E--R---C--A--B--L--E--S---------------------------------------------------------------------- 6 S-W---IT--C--H---/B---U--T--T-O---N--S---------------------------------------------------------------------- 6 C-O--N--N---E--C--T--IO---N--S--------------------------------------------------------------------------- 7 - -O--U--T--P--U--T--S--------------------------------------------------------------------------------- 7 - -IN---P--U--T--/O---U--T--P--U--T--S----------------------------------------------------------------------- 7 T-Y--P--IC---A--L--D---IA---G--R--A--M---S------------------------------------------------------------------- 9 C-O--N--N---E--C--T--IN---G---T--O---E--X--T--E--R--N--A--L---C--H--A--R--G---E--R--S------------------------------------- 10 D-C--D--C---C--H---A--R--G--E--R---M---O--D--E--L------------------------------------------------------------- 11 - -C--O--N--N--E--C---T-I-N--G----T-O---A--L--T--E--R--N--A--T--O--R---I-N--P--U--T---------------------------------------- 11 N-O--N---D--C---D--C---C--H--A--R--G---E--R---M--O---D--E--L----------------------------------------------------- 12 D-I-Y---V--S--R---W--I-R--I-N--G-------------------------------------------------------------------------- 12 D-I-Y---D--C--D--C---C--H--A---R--G--E--R---W---I-R--I-N--G------------------------------------------------------- 13 - -M--O--U---N--T--IN---G---N--E--A--R---B--O--X--------------------------------------------------------------- 13 - -M--O--U---N--T--IN---G---O--N---B--O--X------------------------------------------------------------------- 14 C-O--N--N---E--C--T--IN---G---T--O---A--L-T--E--R--N---A--T-O---R---IN---P--U--T----------------------------------------- 16 - -C--O--N--N--E--C---T-I-N--G----T-O---U---N--R--E--G--U---L-A--T--E--D---S--O--L--A--R------------------------------------ 16 T-E--C--H--N--I-C--A--L---S--P--E--C--I-F--I-C--A--T--IO---N--S------------------------------------------------------ 17 F-R--E--Q--U--E--N--T--L--Y--A---S--K--E--D---Q--U--E--S--T--I-O--N---S----------------------------------------------- 18 Congratulations On Purchasing Your New KickAss Jaxbox Powerstation Why KickAss? What makes KickAss different is the fact that we offer the complete solution: KickAss Power Station, Solar Panels, Portable Fridges, AC Chargers and everything you need to get your off-grid camping needs solved in one place. Designed by the KickAss Team The KickAss Powerstation has been designed in-house by the KickAss Team and has taken over 3 years of hard work and dedication to complete. We listened to our customers over many years to make a feature rich and practical portable power station. OPTIONAL JUMPER CABLE OPTIONAL DCDC CHARGER ON 888 POWER STATION SKU: KAJBABASE | V1.4 POWER STATION OPTIONAL TRAY OFF IMPORTANT SAFETY INSTRUCTIONS Y For use with 12V rechargeable batteries only. Y Never attempt to recharge non-rechargeable batteries. Y The lid of the battery box must remain shut at all times whilst charging a battery or powering a device from an outlet. Y Do not allow any metal objects to fall into the battery box or enter any of the ports. Y Never insert anything other than a compatible electrical plug into any of the ports on the battery box. Y Ensure that the battery box is shut and the screws are tight before powering any devices. Y Do not try to jumpstart when using lithium batteries. 1 OVERVIEW OPTIONAL DCDC CHARGER 2.4A USB & QC3.0 USB 2.4A USB & QC3.0 USB CIGARETTE SOCKET CIGARETTE SOCKET MAIN ON/OFF SWITCH VOLTAGE METER ON/OFF SWITCH DIGITAL VOLTMETER BATTERY BOX LID Material ABS 888 Temperature Range -10ºC to +60ºC CARRY HANDLE POWER STATION CARRY HANDLE SKU: KAJBABASE | V1.4 BATTERY BOX BASE FRONT 4X IN/OUT POWER CONNECTORS HIGH POWER CONNECTOR 2X IN/OUT POWER CONNECTORS REMOVABLE FOAM BLOCK Removable Foam Block (Non DCDC Version Only) TIE DOWN STRAP HOLE SIDE Plug and wires go up and are hidden behind a channel on the back of the battery box. BACK 2 ALTERNATOR INPUT (DCDC VERSION ONLY) SOLAR INPUT (DCDC VERSION ONLY) GETTING STARTED NOTE: If your battery box base was shipped with a battery installed, skip to Step 3. Step 1: Peel off the plastic film to expose the non-slip surface of the silicone pads. Step 3: Secure the battery in place by tightening the velcro strap over the battery. Note: the pads may be washed to regain stickiness. Step 2: Lower your battery into the battery box base carefully, locating it as centrally as possible on the non-slip pads. 12 VOLT - 120A/H AGM - DEEP CYCLE VISIT OUR WEBSITE FOR MORE DETAILS www.kickassproducts.com.au Step 4: Install the battery cables onto the terminal posts of the battery. Ensure the red cable is connected to the positive (+) terminal and black cable connected to the negative (-) terminal. For DCDC versions, also connect the thin black cable to the negative (-) terminal. Tighten firmly but be sure not to over tighten the battery terminals. ON 888 DCDC TEMPERATURE SENSOR OFF POWER STATION SKU: KAJBABASE | V1.4 12 VOLT - 120A/H AGM - DEEP CYCLE - Do not Short Circuit - Do not charge in a sealed container - Keep sparks and flames away - Do not leave battery in a discharged state - Use only fully automatic or regulated chargers - Discharging below 10.8 volts will void warranty CHARGE VOLTAGE CYCLE USE 14.4V - 15.0V (±3mV) MAXIMUM CURRENT 25A FLOAT USE 13.6 - 13.8V (±3mV) www.kickassproducts.com.au 3 Step 5: Tuck cables in under battery box lid, lowering lid carefully onto box ensuring the lid is correctly oriented. Step 6: Install the 4 provided screws to fasten the lid to the base, being sure not to over tighten with the supplied allen key. ON 888 ON 888 OFF OFF POWER STATION SKU: KAJBABASE | V1.4 POWER STATION SKU: KAJBABASE | V1.4 BATTERY TO USE 35kg DEEP CYCLE 235mm BATTERY 340mm 185mm Max. Battery Dimensions: 340mm L x 185mm W x 235mm H (with Silicone Mat) Max. Battery Weight: 35kg Supported Chemistries: AGM, Calcium, Wet, Gel or Lithium LiFePO4 (Deep Cycle Batteries) 4 OPTIONAL ACCESSORIES MOUNTING TRAY (OPTIONAL) Step 1: Confirm install location of tray, drilling any required holes. TOP Install the strap under the tray, sliding the strap into the slots either side. BOTTOM Ensure strap is oriented correctly so that the hooks face toward the Power Station when installed. Securely affix the tray in position using bolts or screws, whichever is applicable. Ensure that washers are used when installing the tray, to avoid damage. Note: We do not provide the screws or bolts for this installation. Step 2: Ensure straps are laying outside the tray before lowering the battery box carefully onto the tray. Attach each strap hook to the corresponding slot in the Power Station. Step 3: For ease of tightening, place thumbs in each strap loop, pushing firmly downwards. The strap should tighten and hold the Power Station firmly in place. To release, depress the buckle and pull the strap to loosen. ON 888 OFF POWER STATION SKU: KAJBABASE | V1.4 5 JUMPER CABLES (OPTIONAL) SURGE PROTECTED CABLE LENGTH 2M YOUR FLAT BATTERY KickAss 1000 Amp Jumper Cables have been designed to give you the optimum starting power in the case of a flat starter battery. When it comes to Jumper Cables there is no substitute for quality and these KickAss Jumper Cables have been designed to be tough, durable and most of all, work flawlessly when you need them. Note: Y Do not use jumper cables with lithium batteries. Y Leave the jumper cables connected to the flat battery for 5 minutes before attempting to jump start battery. SWITCH/BUTTONS The Master Switch The master switch disconnects everything (except for the large 175 amp Anderson style plug) from the battery including the DC-DC Charger. Turning it off is a quick way to disconnect all devices to ensure your battery is not being drained. Note: The DC-DC Charger + Solar Regulator cannot charge the internal battery while the Master Switch is in the OFF position, nor can an external charger. If another, external battery is connected through one of the IN/OUT connectors, the DC-DC is able to charge that battery, even with the Master Switch in the OFF position - bypassing the internal battery. The Voltmeter The inbuilt voltmeter will display the voltage of your battery. For an accurate voltage reading, disconnect all loads and charging sources from the power station and test. Note: The battery voltage table on the top sticker of the battery box is to be used as a guide only, check your battery specifications if you want to be precise. OFF ON . 12V DC 6 CONNECTIONS OUTPUTS 2 X CIGARETTE SOCKET OUTPUTS = Maximum 10A output per socket 2 X DUAL USB / QC3.0 OUTPUTS = 2 x 2.4A High Powered USB (White) = 2 x Quick Charge QC 3.0 Ultra High Powered USB Outputs (5V/3.1A, 9V/2A, 12V/1.5A - Blue) 2 x Cigarette Socket Outputs 2 x Dual USB / QC3.0 Outputs Benefits of Quick Charge When paired with compatible devices, a Quick Charge-enabled charger delivers more power, allowing the connected device to charge faster. As one of the most widely used of the fast charging technologies, Quick Charge is already in many of your favorite smartphones. If your smartphone is Quick Charge 3.0compatible, you can charge up to 80% in just 35 minutes. To future-proof your chargers, each new Quick Charge generation is backwards compatible, meaning it will work with the generations that came before. INPUTS/OUTPUTS 1 X (175A) ANDERSON STYLE PLUG 1 x (175A) Anderson Style Plug on the left side = High Current Inverter Output = Emergency 600A Jump Starter Output (7 seconds) = Connected directly to battery WARNING: 1. Master switch does not disconnect the battery from this connector. 2. This output is NOT Fused or Short Circuit Protected. 3. Do not jump start a vehicle for longer than 7 seconds. 4. KickAss Deep Cycle batteries should be used for jump starting in emergency situations ONLY, as it will affect battery health. 5. Check battery specifications and compatibility with high current draw before using jump start connector. 6. Lithium batteries should not be used for jump starting. 7 6 X (50A) ANDERSON STYLE PLUGS 2 x (50A) Anderson Style Plugs on the back 4 x (50A) Anderson Style Plugs on the side = Input / Output Capable. = All Anderson Plugs combined must not exceed 50A total current. WARNING: 1. Do not plug in multiple chargers as inputs. 2. Do not use an external charger while the DC-DC Charger is operating. 3. Exceeding 50A combined current rating will trigger the safety breaker. Safety breaker will auto-reset in time. NOTE: THE 6 ANDERSON PLUGS INDICATED CANNOT EXCEED A TOTAL OF 50 AMPS COMBINED. 8 TYPICAL DIAGRAMS Charging with External charges plug-in to any of these sockets plug-in to any of these sockets REGULATED SOLAR PANEL AC CHARGER LEAD ACID GEL AGM LITHIUM C O M PAT I B I L I T Y POWER CHARGING/ FAULT 22A SMART CHARGER Jump Starting with Powerstation - + FLAT BATTERY Note: Not for lithium 9 CONNECTING TO EXTERNAL CHARGERS The KickAss Power Station may be charged in a number of ways: Y Connecting an AC charger to any of the in/out Anderson style connectors. Y Connecting a solar panel with regulator/controller to any of the in/out Anderson style connectors. Y Connecting alternator power to optional DCDC Charger in a vehicle. Y Connecting an unregulated solar panel input to optional DCDC Charger. Y Connecting the starter battery to a VSR wiring kit and then connecting to any of the in/out Anderson style connectors (non DCDC battery box only). Warning: Y Connecting multiple chargers to the battery at any one time is not recommended. Y Do not connect an unregulated solar panel directly to the battery via any of the in/out connectors. 10 DCDC CHARGER MODEL CONNECTING TO ALTERNATOR INPUT The following information only applies to the KickAss Battery Boxes fitted with a DCDC Charger. For specific information regarding the operation of the DCDC Charger, refer to the specific charger manual. The KickAss Power Station includes a built-in DC-DC Charger suitable for charging from a vehicle alternator. The easiest way to connect the Power Station to your vehicle is by using the KickAss Plug & Play Wiring Kit (sold separately). The triple Anderson style connector fitted to the Power Station interfaces with the KickAss Plug & Play Wiring Kit, providing a simple, quick release vehicle charging solution. This triple connector and cable provides alternator power to the DC-DC on the Power Station, along with an Ignition Source for charging in vehicles that are fitted with Smart or Temperature Compensating Alternator. For more information on installing a Dual Battery Wiring Kit and Ignition Wire, please visit kickassproducts.com.au/support 888 POWER STATION SKU: KAJBABASE | V1.4 STARTER BATTERY VEHICLE STARTER BATTERY KICKASS Premium Plug & Play DC-DC Wiring Kit SKU: KAPRDBWK8MMPP 11 NON DCDC CHARGER MODEL DIY VSR WIRING The following information only applies to the KickAss Battery Boxes fitted without a DCDC Charger The KickAss Battery Box allows you to create an all in one dual battery system. For vehicles without smart or temperature compensating alternators. The easiest way to connect the control hub to your vehicle with a voltage sensitive relay is by using the KICKASS Plug & Play Dual Battery System Wiring Kit & Dual Sensing VSR (sold separately). The 6 Anderson style connector fitted to the control hub interfaces with the KickAss Plug & Play Wiring Kit, providing a simple, quick release vehicle charging solution. This connector and cable provides alternator power to your second battery through the battery box. OVERRIDE OFF OVERRIDE ON STARTER BATTERY VEHICLE STARTER BATTERY OVERRIDE OFF OVERRIDE ON KICKASS Plug & Play Dual Battery System Wiring Kit & Dual Sensing VSR SKU: KADABE K8MMV SR2AND 12 DIY DCDC CHARGER WIRING Note: Prior to undertaking any DIY Installation ensure your battery is disconnected and your lid is removed from the battery box base. If you already have a DCDC Charger, there are a number of ways in which you can install it on the non DC DC version of the battery box. Method One (Mounting near box) If you have a mounting position for the DCDC charger in the vehicle, close to the battery box, simply crimp an Anderson style connector to the output of the DCDC charger and connect to any of the In/Out Anderson Style connectors. If required, blank two pin anderson style connectors can be purchased from the KickAss Store. 888 POWER STATION SKU: KAJBABASE | V1.4 STARTER BATTERY VEHICLE STARTER BATTERY 13 Method Two (Mounting on box) 1. Flip the battery box lid upside down, remove the 6 screws and carefully remove the cover revealing the cabling. 2. There is a pre-drilled hole for cabling on the face of the battery box, this is covered by the sticker. Locate this hole on the top of the lid that is marked by a large dashed circle. Using a sharp knife, cut the sticker. 3. The DCDC charger must be suitably mounted to the lid of the battery box. There are 4 threaded holes on the top of the lid, these are located under the smaller dashed circles. If you wish to make use of these holes to mount your DCDC charger, again cut the sticker with a sharp knife. If you need to drill holes into the battery box lid, caution must be taken to ensure cables beneath are not damaged. 4. Crimp Anderson connectors onto the solar and alternator input wires including the ignition trace wire. 14 OFF ON 888 5. Connect the outlet wires of your DCDC Charger to the red and black terminal posts. RED TERMINAL BLACK TERMINAL SOLAR + GROUND 1 ALT. + GROUND 2 IGNITION 6. Remove the 4 screws holding the piece of plastic in and push the foam block out. 7. Using appropriate screws, attach the two and three pin Anderson style plugs to the piece of plastic. Connect the wires to the appropriate port in the Anderson style plug. 8. Slide the mounted anderson style connectors into the slot in the battery box and return the 4 screws to hold the mount in. 9. Replace the cover concealing the cabling and carefully return the 6 screws. 15 CONNECTING TO ALTERNATOR INPUT CONNECTING TO UNREGULATED SOLAR KickAss Battery Box includes a built-in DC-DC Charger with a MPPT regulator suitable for charging from unregulated solar panels. To connect your solar panel to the regulator simply plug it in via the anderson style plug on your battery box. Note: Y Your solar panel open circuit voltage must not exceed 23 VoC, the voltage of your panel can generally be found on the sticker on the rear of your solar panel Y If your solar panel is fitted with a built-in regulator, you will need to bypass the regulator port. Alternatively you can connect your regulated solar panel to any of the 6 in/out anderson style connectors. UNREGULATED SOLAR PANEL 32V MAX 16 TECHNICAL SPECIFICATIONS BATTERY BOX INFORMATION Material ABS Temperature Range -10ºC - +60ºC BATTERY INFORMATION Supported Chemistries AGM, Calcium, Wet, Gel or Lithium (Deep Cycle Only) MAX Battery Dimensions 340mm L x 185mm W x 235mm H (with Silicone Mat) MAX Battery Weight 35kg PORTS (INPUT/OUTPUT) 6 x (50A) Anderson Style Plugs Input / Output Capable Maximum Combined 50A Current Rating WARNING: 1. Do not plug in multiple chargers as inputs 2. Do not use an external charger while the DC DC Charger is operating 3. Exceeding 50A combined current rating will trigger the safety breaker 1 x (175A) Anderson Style Plug High Current Inverter Output WARNING: 1. Master switch does not disconnect the battery from this connector 2. This output is NOT Fused or Short Circuit Protected 3. Do not jump start a vehicle for longer than 7s 4. KA deep cycle batteries should be used for jump starting in emergency situations ONLY, as it will affect battery health 5. Check battery specifications and compatibility with high current draw before using jump start connector 6. Lithium batteries should not be used in this box when intending to jump start 2 x Cigarette Socket Outputs 2 x Dual USB / QC 3.0 Outputs Maximum 10A output per socket 2 x 2.4A Standard USB Output 2 x QC 3.0 Output (5V/3.1A, 9V/2A, 12V1.5A) DCDC CHARGER MODEL ALTERNATOR INPUT 1 x Triple Anderson Style Plug SOLAR INPUT 1 x (50A) Anderson Style Plug 9-32V DC Starter Battery Input (+/-) Ignition Override Input (I) Minimum Solar Input Voltage: 9V DC Maximum Solar Input Voltage: 23V DC Maximum Solar Input Current: 25A WARNING: 1. Do not exceed the Maximum Voltage of 23V DC 2. Do not exceed the Maximum Input Current of 25A 17 FREQUENTLY ASKED QUESTIONS Q. If storing my KickAss Power Station for long periods, what should I do to look after my battery's health? An AGM battery is best stored fully charged. The KickAss Power Station is fitted with a Master Switch that allows all outlets to be disconnected from the battery for storage - meaning nothing can drain the battery over time. For short term storage we recommend fully charging the battery with a 240V mains charger, before switching off the Master Switch and storing. For longer term storage, we recommend instead to connect a 240V mains charger to the battery in order to continually maintain a full state of charge - this process is called trickle charging. Q. Is the Power Station waterproof? The KickAss Power Station has been designed to be as resistant to moisture and dust as possible, though it is not waterproof. Do not leave exposed to rain or weather, and do not submerse. For more information visit us at kickassproducts.com.au/support The information in this document is subject to change without prior notice. 18 THANK YOU FOR CHOOSING JAXBOX X1 POWERSTATION YOUR COMPLETE 12-VOLT POWER SOLUTION 19