Hama FUNSTAND 57 Selfie Stick with Bluetooth® Remote Trigger

Product Overview

The Hama FUNSTAND 57 is a selfie stick designed to enhance your mobile photography and videography. It features a twist-proof telescopic rod, a removable Bluetooth® remote trigger for convenient operation, and spreadable tripod legs for stable placement.

Key Components

• Twist-proof telescopic rod
• Removable Bluetooth® trigger
• Spreadable tripod legs

Diagram Description: The product consists of a handle with integrated tripod legs, a telescopic arm that extends for greater reach, and a clamp to hold a smartphone. A separate, small Bluetooth® remote trigger is included.

Getting Started

1. Open the Bluetooth® remote release housing by separating it with a coin (e.g., a 2 pence piece).
2. Remove the battery cover and insert one CR1632 battery, ensuring correct polarity (+ and - markings).
3. Close the battery compartment by pushing the two housing covers back together.

Operation

Note: Functions described are available only for Bluetooth®-capable terminal devices.

The maximum Bluetooth® range is 10 meters without obstacles like walls or people.

Bluetooth® Pairing

Note – Pairing:

• Ensure your Bluetooth®-capable terminal device is powered on and Bluetooth® is activated.
• Make sure your terminal device is visible to other Bluetooth® devices.
• Refer to your terminal device's operating instructions for more details.
• Press and hold the ON/OFF button (2) on the remote trigger for approximately 3 seconds to turn it on. The indicator light (1) will begin to flash blue, indicating it is searching for a connection.
• Open the Bluetooth® settings on your terminal device. Wait until "hama Funstand57" appears in the list of found Bluetooth® devices.
• Select "hama Funstand57". The indicator light (1) will go out once the remote trigger is connected.
• You can now use the Bluetooth® remote release.

Automatic Bluetooth® Connection (after successful pairing)

Note:

• Ensure your Bluetooth®-capable terminal device is powered on and Bluetooth® is activated.
• Make sure your terminal device is visible to other Bluetooth® devices.
• Refer to your terminal device's operating instructions for more details.
• The Bluetooth® remote release remains connected to the last paired device.
• Press and hold the ON/OFF button (2) for approximately 3 seconds to turn on the remote release. The indicator light (1) begins to flash blue.
• After 3-5 seconds, the remote release will automatically connect to the device.
• You can now use the Bluetooth® remote release.

Connection Impaired

If the Bluetooth® connection does not re-establish automatically after initial pairing, check the following:

• Verify in your terminal device's Bluetooth® settings that "hama Funstand57" is connected. If not, repeat the pairing steps (Section 6.1).
• Check if obstacles are affecting the range. If so, move the devices closer together.
• A weak battery can also affect performance. Change the battery if necessary.
• Only one Bluetooth® device can be connected at a time. If you are connected to another device, deactivate that connection and try again.

Replacing the Batteries

The battery is designed for up to 2,000 shots, depending on usage conditions. If the Bluetooth® remote release shows no reaction when the release button (2) is pressed, or fails to connect to the terminal device, change the battery as follows (refer to diagram B on Page 3).

Care and Maintenance

Clean this product only with a slightly damp, lint-free cloth. Do not use aggressive cleaning agents. Ensure that no water gets into the product.

Warranty Disclaimer

Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.

Technical Data

Declaration of Conformity

Hama GmbH & Co KG hereby declares that the radio equipment type [00004316] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.hama.com/00004316/Downloads.

Safety Notes and Warnings

Explanation of Warning Symbols and Notes

• ⚠️ Warning: Used to indicate safety instructions or to draw attention to specific hazards and risks.
• ℹ️ Note: Used to indicate additional information or important notes.

General Safety Notes

• Protect the product from dirt, moisture, and overheating; use only in dry environments.
• Do not use the product in areas where electronic devices are not permitted.
• Do not use the product in moist environments and avoid splashes.
• Do not drop the product or expose it to major shocks.
• Dispose of packaging material immediately according to locally applicable regulations.
• Do not modify the product in any way, as this voids the warranty.
• Use the product only for its intended purpose.
• This product is intended for private, non-commercial use only.
• Do not operate the product near heaters, other heat sources, or in direct sunlight.
• Keep this product, like all electrical products, out of the reach of children!
• Do not operate the product outside the specified power limits.
• Do not attempt to service or repair the product yourself; leave all service work to qualified experts.
• Do not open the device or continue to operate it if it becomes damaged.

Warning – Batteries

• When inserting batteries, note the correct polarity (+ and - markings) and insert accordingly. Failure to do so could result in batteries leaking or exploding.
• Only use batteries (or rechargeable batteries) that match the specified type.
• Before inserting batteries, clean the battery contacts and the polar contacts.
• Do not allow children to change batteries without supervision.
• Do not mix old and new batteries, or batteries of different types or makes.
• Remove batteries from products not being used for extended periods (unless kept ready for emergency).
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not throw batteries in a fire.
• Keep batteries out of the reach of children.
• Never open, damage, swallow, or allow batteries to enter the environment. They can contain toxic, environmentally harmful heavy metals.
• Immediately remove and dispose of dead batteries from the product.
• Avoid storing, charging, or using the device in extreme temperatures and extremely low atmospheric pressure (e.g., at high altitudes).

Warning – Button cells

• Do not ingest battery; risk of burns due to dangerous substances.
• This product contains button cells. If swallowed, a button cell can cause severe internal burns within just two hours and lead to death.
• Keep new and used batteries out of the reach of children.
• If the battery compartment does not close securely, stop using the product and keep it out of the reach of children.
• If you think batteries were swallowed or are in a part of the body, seek medical assistance immediately.

System Requirements

The Bluetooth® remote release supports Bluetooth®-capable terminal devices such as smartphones and tablet PCs running iOS 5.0.1 or Android 4.2 (or newer) operating systems.

Note: Support for the Bluetooth® remote release depends on your terminal device. Refer to your terminal device's operating instructions.