VIETA PRO Fit Earphones VHP-TW24
Thank you for purchasing the Fit earphones VHP-TW24. To ensure correct operation, please read this manual carefully before use.
About Vieta Pro
This product has been developed under the VIETA PRO quality standards. For over 60 years, since its foundation in 1954 by the Vieta brothers, Vieta has always been guided by the motto "Love and respect for the art of music". It has thus achieved a privileged position in the electronics market, with constant effort and generous doses of passion. The VIETA PRO models are based on professional sound standards, where quality, durability and sound are above those in commercial products of consumer electronics. They have been developed by the prestigious engineer "Jordi Hernandez", with more than 40 years in the sound industry. Under his expert direction, the VIETA PRO models are manufactured with the most precise components, producing the purest VIETA PRO sound.
Product Overview
Bluetooth earphones should be used with compatible devices which support Bluetooth wireless technology. This will allow you to make calls and enjoy music freely at any time. Make sure that your equipment has an updated Bluetooth 5.0 protocol for correct communication with new earphone technologies.
Please read this user manual carefully before using the product. Pay attention to the device safety and maintenance recommendations. For safety reasons, keep the product out of the reach of children. Keep it in a safe place for future reference.
Safety Information
General Safety
- There are voltage zones inside this unit that can cause injuries. Please do not open the unit. In case of technical failure, please contact the authorized service center.
- Never place the unit in the rain or in moist zones so as to avoid a fire or an electric shock.
- If technical maintenance is required, please contact the authorized service center.
Caution
- Do not place the unit on an unstable surface as it may fall and break or cause damage to people or pets.
- Disconnect the unit from the mains before cleaning it. Do not use cleaning liquids or sprays. Use only a soft, damp cloth.
- To avoid possible damage to the equipment, please unplug it during storms or when it will not be used for a long time.
- Do not insert any object into the unit through the loading ports as this could cause a short circuit and start a fire. Do not pour liquid on the earphone.
Power On and Charging
Charging the Battery
Fully charge the built-in battery before using for the first time, which will prolong the battery lifespan. When the case battery (charging box) is fully charged, the green LED next to the charging port will stop blinking, indicating charging mode is complete.
Charging Steps
- Put the earphones inside the charge box.
- Connect your smartphone's power adapter (5V) to the charge box using the included USB Type C cable.
- Verify that the charge box is charging: the LED indicator shows blinking green.
If the charging box is turned off due to running out of battery, the screen will take between 3 to 5 minutes to enter the charging state.
Charging Completion
- A full charge will take around 1-2 hours. The LED indicator will cease blinking in green. You can then disconnect the USB Type C cable.
- Keep the earphones in the charge box to charge them. It's recommended to leave them for 1-2 hours for the earphones to reach 100% charge to maintain good battery health.
When the battery of the earphones is below 10%, a voice prompt "Battery Low" will sound. Insert them into the charge box. When the LED indicator inside the charge box turns Red, connect 5V power again.
Charging Indicator Status
| The charging indicator flashing in green. | Under charging. |
| The charging indicator cease flashing in green. | Charging finishing. |
The image shows the earphones inside the charging case, with an arrow pointing to the USB Type C charging port.
Specifications
| Model Name | Vieta Pro Fit |
| Bluetooth version | Bluetooth 5.0 |
| Transmission Distance | 10 m |
| Charge box capacity | 400 mAh |
| Earphones battery | 45 mAh |
| Talking time | 12 hours (50% Volume) |
| Play time | 4 x 5 h = 20 h (50% Volume) |
| Charge time | 1-2 hours |
| Input Power | DC 5V/1A USB Type C |
| Support phone system | iOS, Android |
| Audio format | MP2, MP3, WMA, APE, FLAC, AAC, MP4, WAV, AIFF, AIFC |
Operations and Features
Key Definitions
| 1 | Sound output |
| 2 | Control panel |
| 3 | Earphones charging points in the charging box |
| 4 | USB Type C charging port |
| 5 | Charging box battery level: Green LED: 75%-100%, Blue LED: 11%-74%, Red blinks LED: 1%-10% |
Key Operations
| Power ON | When you open the charging box cover, earphones will turn on automatically. |
| Power OFF | When you insert the earphones in the charging box and close the charging cover, they will turn off automatically. If earphones are out of the charging box but remain inactive (standby mode), insert them into the charging box to turn off and charge. If an earphone is not connected to the multimedia device (earphones waiting for pair), it will automatically power off after 10 minutes. IMPORTANT: It's very important that if you're not using the earphones, keep them in the charging box. |
| Answer phone Call | One time touch "L" side or "R" side. |
| Hang Up phone Call | One time touch "L" side or "R" side. |
| Refuse phone Call | Long press "L" side or "R" side. |
| Play / Pause | One time touch "R" side. |
| Increase Volume | Long press "R" side while playing music. |
| Decrease Volume | Long press "L" side while playing music. |
| Next song | Double touch "R" side. |
| Previous song | Double touch "L" side. |
| Active Voice Assistant | One time touch "L" side. |
| Exit Voice Assistant | One time touch "R" side. |
| Disconnect Bluetooth pairing | Five times touch "L" side or "R" side. |
Earphone Pairing Mode
- Once earphones are charged, take them out of the charge box.
- The L/R earphones will turn on automatically when you take them out of the charge box and connect to each other. They will then wait for Bluetooth connection.
- On your media device (Smartphone/Computer/Tablet), search for "Vieta Pro Fit" and connect them. This procedure is necessary only the first time you connect to the same device. Afterwards, if the Bluetooth settings are saved on the smartphone, they will connect automatically when Bluetooth is turned on.
It will pair successfully within 3 seconds with an indication sound to show it is connected.
If you want to use the earphones on another smartphone or media device (computer, tablet, laptop...), you must first unlink the existing connection.
Unpairing Earphones
You have two options to unpair the earphones from the device they are paired:
- Recommended: Disconnect the pairing on the BT device.
- Not recommended: Five times touch "L" side or "R" side to unpair the connection (The earphones will inform about the order to unpair to the paired device).
Important Notes
- Bluetooth pairing name: Vieta Pro Fit.
- To Power Off when music is played, place the earphones into the charging box. The earphones will switch off automatically. When the cover of the charging box is opened again, they power on automatically for connection.
- The mobile phone connects automatically after earphones power on. If connection cannot be made automatically, disable and enable Bluetooth on the media device to find and pair them. Alternatively, try inserting and removing the earphones from the charging box to reset them.
- Please use a 5V charger with the included USB Type C cable (Smartphone or Tablet charger, or Computer USB port).
CE Declaration of Conformity
Issuer's name: FRAMASON AUDIO S.A
Address: Av. de Pau Casals 7, Entresuelo 2- 08021 Barcelona (España)
Tel: +34931162491
CIF: A62829841
We declare under our own exclusive responsibility that the product:
- Description: True Wireless Earphones
- Brand: Vieta Pro
- Model: VHP-TW24
- Manufacturer: FRAMASON AUDIO S.A
- Manufacturing country: China
referred to in this declaration is in compliance with the essential norms and standards:
- EN 55032:2015
- EN 55035:2017
in conformity with the provisions of the Directive 2014/30/UE of the European Parliament and of the Council of 29 March of 2014.
Barcelona, 1 November 2020
Carlos Alberdi
Product Manager
